|
C01 on Cement
REVISION OF STANDARD
Volume 04.01, 2004
C 187-04, Test Method for Normal Consistency of Hydraulic Cement
C04 on Vitrified Clay Pipe
REVISION OF STANDARD
Volume 04.05, 2004
C 896-04, Terminology Relating to Clay Products
C09 on Concrete and Concrete Aggregates
REVISION OF STANDARD
Volume 04.02, 2004
C 233-04, Test Method for Air-entraining Admixtures for Concrete
EDITORIAL CHANGE
Volume 04.02, 2004
C 1603-04e1, Test Method for Measurement of Solids in Water
C11 on Gypsum and Related Building Materials and System
REVISION OF STANDARD
Volume 04.01, 2004
C 840-04a, Specification for Application and Finishing of Gypsum Board
C 847-04, Specification for Metal Lath
Volume 04.01, 2005
C 514-04, Specification for Nails for the Application of Gypsum Board
C 587-04, Specification for Gypsum Veneer Plaster
C 1047-04, Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base
WITHDRAWAL OF STANDARD
Volume 04.01, 2005
C 36/C 36M-03, Specification for Gypsum Wallboard
C 37/C 37M-01, Specification for Gypsum Lath
C 79/C 79M-04a, Specification for Gypsum Sheathing Board
C 442/C 442M-04, Specification for Gypsum Backing Board, Gypsum Coreboard, and Gypsum Shaftliner Board
C 630/C 630M-03, Specification for Water-Resistant Gypsum Backing Board
C 931/C 931M-04, Specification for Exterior Gypsum Soffit Board
C 960/C 960M-04, Specification for Predecorated Gypsum Board
C 1395/C 1395M-04, Specification for Gypsum Ceiling Board
C12 on Mortars and Grouts for Unit Masonry
REVISION OF STANDARD
Volume 04.05, 2004
C 144-04, Specification for Aggregate for Masonry Mortar
C15 on Manufactured Masonry Units
REVISION OF STANDARD
Volume 04.05, 2004
C 56-04, Specification for Structural Clay Non-load-bearing Tile
C 744-04, Specification for Prefaced Concrete and Calcium Silicate Masonry Units
C 1357-04a, Test Methods for Evaluating Masonry Bond Strength
C 1568-04, Test Method for Wind Resistance of Concrete and Clay Roof Tiles Mechanical Uplift Resistance Method
C16 on Thermal Insulation
ERRATUM
ASTM C 335-04, Standard Test Method for Steady-State Heat Transfer Properties of Horizontal Pipe Insulation has been replaced by C 335-05 Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation. Corrections were made to the title and throughout. The corrected version is available from www.astm.org.
REVISION OF STANDARD
Volume 04.06, 2005
C 1289-04, Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board
C 1335-04, Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation
C28 on Advanced Ceramics
REVISION OF STANDARD
Volume 15.01, 2004
C 1499-04, Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
|
