D02 on Petroleum Products and Lubricants
REVISION OF STANDARD
Volume 05.01
D 86-07a Test Method for Distillation of Petroleum Products at Atmospheric Pressure
D 87-07 Test Method for Melting Point of Petroleum Wax (Cooling Curve)
Volume 05.04
D 6751-07a Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
Volume 05.05
D 2699-07 Test Method for Research Octane Number of Spark-Ignition Engine Fuel
D 2700-07a Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
D04 on Road and Paving Materials
EDITORIAL CHANGE
Volume 04.03
D 3666-07ε2 Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
REVISION OF STANDARD
Volume 04.03
D 4956-07 Specification for Retroreflective Sheeting for Traffic Control
REVISION OF STANDARD
Volume 05.06
D 3175-07 Test Method for Volatile Matter in the Analysis Sample of Coal and Coke
REAPPROVAL OF STANDARD
Volume 04.10
D 143-94(2007)
D 1102-84(2007)
D 1105-96(2007)
D 1106-96(2007)
D 1107-96(2007)
D 1108-96(2007)
D 1109-84(2007)
D 1110-84(2007)
D 1166-84(2007)
D 1762-84(2007)
D 2719-89(2007)
D 5124-96(2007)
D 5652-95(2007)
D 5933-96(2007)
E 69-02(2007)
REVISION OF STANDARD
Volume 04.10
D 3737-07 Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam)
WITHDRAWAL OF STANDARD
Volume 04.10
D 4064 Practice for Preservative Treatment of Utility Poles by the Thermal Process
D08 on Roofing and Waterproofing
REAPPROVAL OF STANDARD
Volume 04.04
D 3019-94(2007)
REVISION OF STANDARD
Volume 04.04
D 4022-07 Specification for Coal Tar Roof Cement, Asbestos Containing
REVISION OF STANDARD
Volume 15.10
D 6179-07 Test Methods for Rough Handling of Unitized Loads and Large Shipping Cases and Crates
REVISION OF STANDARD
Volume 09.01
D 1485-07 Practice for Rubber from Natural Sources-—Sampling and Sample Preparation
D 3184-07 Test Methods for Rubber—Evaluation of NR (Natural Rubber)
D 3186-07 Test Methods for Rubber—Evaluation of SBR (Styrene-Butadiene Rubber) Mixed With Carbon Black or Carbon Black and Oil
D 3403-07 Test Methods for Rubber—Evaluation of IR (Isoprene Rubber)
D 3896-07 Practice for Rubber From Synthetic Sources—Sampling
EDITORIAL CHANGE
Volume 07.02
D 4723-07e1 Classification Index of and Descriptions of Textile Flammability Test Methods
REAPPROVAL OF STANDARD
Volume 07.01
D 3884-01(2007)
REVISION OF STANDARD
Volume 07.01
D 2812-07 Test Method for Non-Lint Content of Cotton
Volume 07.02
D 4910-07 Tables of Body Measurements for Infants, Sizes 0 to 24
D 5684-07 Terminology Relating to Pile Floor Coverings
REVISION OF STANDARD
Volume 15.06
D 3535-07 (Includes change to title) Test Method for Resistance to Creep Under Static Loading for Structural Wood Laminating Adhesives Used Under Exterior Exposure Conditions
EDITORIAL CHANGE
Volume 15.05
D 1123-99(2003)e1 Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method
D 1881-97(2002)e2 Test Method for Foaming Tendencies of Engine Coolants in Glassware
D 6660-01e1 Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method
D16 on Aromatic Hydrocarbons and Related Chemicals
NEW STANDARD
Volume 06.04
D 7183-07 Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
D 7184-07 Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection
NEW STANDARD
Volume 04.09
D 7322-07 Test Method for Determination of Rolled Erosion Control Product (RECP) Ability to Encourage Seed Germination and Plant Growth Under Bench-Scale Conditions
REAPPROVAL OF STANDARD
Volume 04.09
D 6393-99(2006)
REVISION OF STANDARD
Volume 04.08
D 2844-07 Test Method for Resistance R-Value and Expansion Pressure of Compacted Soils
D 4719-07 Test Methods for Prebored Pressuremeter Testing in Soils
D 4959-07 Test Method for Determination of Water (Moisture) Content of Soil By Direct Heating
Volume 04.09
D 6460-07 (Includes change to title) Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Earthen Channels from Stormwater-Induced Erosion
D 7243-06a Guide for Measuring the Saturated Hydraulic Conductivity of Paper Industry Sludges
REVISION OF STANDARD
Volume 11.01
D 6091-07 Practice for 99 %/95 % Interlaboratory Detection Estimate (IDE) for Analytical Methods with Negligible Calibration Error
D 6512-07 Practice for Interlaboratory Quantitation Estimate
REAPPROVAL OF STANDARD WITH EDITORIAL CHANGE
Volume 08.04
D 2105-01(2007)e1 Test Method for Longitudinal Tensile Properties of Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
D 2925-01(2007)e1 Test Method for Beam Deflection of Fiberglass (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow
D 2997-01(2007)e1 Specification for Centrifugally Cast Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
REVISION OF STANDARD
Volume 08.01
D 648-07 Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
D 746-07 Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
D 1004-07 Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting
D 1056-07 Specification for Flexible Cellular Materials—Sponge or Expanded Rubber
D 1204-07 Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
D 1525-07 Test Method for Vicat Softening Temperature of Plastics
D 1693-07 Test Method for Environmental Stress-Cracking of Ethylene Plastics
D 2582-07 Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting
D 2583-07 Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
D 3012-07 Test Method for Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven
Volume 08.02
D 4092-07 Terminology for Plastics Dynamic Mechanical Properties
D 4101-07 Specification for Polypropylene Injection and Extrusion Materials
D 4203-07 Specification for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials
D 4440-07 Test Method for Plastics: Dynamic Mechanical Properties: Melt Rheology
D 4801-07 Specification for Polyethylene Sheeting in Thickness of 0.25 mm [0.010 in.] and Greater
Volume 08.03
D 5155-07 Test Methods for Polyurethane Raw Materials Determination of the Isocyanate Content of Aromatic Isocyanates
D 5203-07 Specification for Polyethylene Plastics Molding and Extrusion Materials from Recycled Post-Consumer (HDPE) Sources
D 6779-07 Classification System for Polyamide
Molding and Extrusion Materials (PA)
REAPPROVAL OF STANDARD
Volume 15.04
D 3440-01(2007)
D 3836-94(2007)
D 6625-01(2007)
WITHDRAWAL OF STANDARD
Volume 15.04
D 1342 Test Method for Paraffin-Type Hydrocarbons in Carnauba Wax
D26 on Halogenated Organic Solvents and Fire Extinguishing Agents
REAPPROVAL OF STANDARD
Volume 15.05
D 2943-02(2007)
D 4126-02(2007)
D 4376-02(2007)
D 5394-02(2007)
REAPPROVAL OF STANDARD WITH EDITORIAL CHANGE
Volume 15.05
D 6806-02(2007)e1 Practice for Analysis of Halogenated Organic Solvents and Their Admixtures by Gas Chromatography
D30 on Composite Materials
EDITORIAL CHANGE
Volume 15.03
D 5961/D 5961M-05ε1 Test Method for Bearing Response of Polymer Matrix Composite Laminates
NEW STANDARD
Volume 15.03
D 7332/D 7332M-07 Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite
REVISION OF STANDARD
Volume 15.03
C 273/C 273M-07 Test Method for Shear Properties of Sandwich Core Materials
C 364/C 364M-07 Test Method for Edgewise Compressive Strength of Sandwich Constructions
NEW STANDARD
Volume 11.04
D 7204-07 Practice for Sampling Waste Streams on Conveyors
REAPPROVAL OF STANDARD
Volume 11.04
D 5829-96(2007)
|
