|
F01 on Electronics
EDITORIAL CHANGE
Volume 10.04
F 584-06e1, Practice for Visual Inspection of Semiconductor Lead-Bonding Wire
F03 on Gaskets
EDITORIAL CHANGE
Volume 09.02
F 112-00e1, Test Method for Sealability of Enveloped Gaskets
F 434-93(2003)e1, Test Method for Blow-Out Testing of Preformed Gaskets
F 806-99a(2003)e1, Test Method for Compressibility and Recovery of Laminated Composite Gasket Materials
F04 on Medical and Surgical Materials and Devices
EDITORIAL CHANGE
Volume 13.01
F 2052-06e1, Test Method for Measurement of Magnetically Induced Displacement Force on Medical Devices in the Magnetic Resonance Environment
F07 on Aerospace and Aircraft
REVISION OF STANDARD
Volume 15.03
F 945-06, Test Method for Stress-Corrosion of Titanium Alloys by Aircraft Engine Cleaning Materials
F 1459-06, Test Method for Determination of the Susceptibility of Metallic Materials to Hydrogen Gas Embrittlement (HGE)
F08 on Sports Equipment and Facilities
REVISION OF STANDARD
Volume 15.07
F 2120-06, Practice for Testing Treestand Load Capacity
F 2126-06, Test Method for Treestand Static Load Capacity
F09 on Tires
EDITORIAL CHANGE
Volume 09.02
F 1364-03e1, Practice for Use of a Calibration Device to Demonstrate the Inspection Capability of an Interferometric Laser Imaging Nondestructive Tire Inspection System
F10 on Livestock, Meat, and Poultry Evaluation Systems
REVISION OF STANDARD
Volume 15.08
F 2343-06, Test Method for Livestock, Meat, and Poultry Evaluation Devices
F11 on Vacuum Cleaners
REVISION OF STANDARD
Volume 15.08
F 558-06, Test Method for Measuring Air Performance Characteristics of Vacuum Cleaners
F 655-06, Specification for Test Carpets and Pads for Vacuum Cleaner Testing
F 820-06, Test Method for Measuring Air Performance Characteristics of Central Vacuum Cleaning Systems
F 888-06, Test Method for Measuring Maximum Function Volume of the Primary Dirt
F 2105-06, Test Method for Measuring Air Performance Characteristics of Vacuum Cleaner Motor/Fan Systems
F14 on Fences
REVISION OF STANDARD
Volume 01.06
F 1553-06 (Includes change to title), Guide for Specifying Chain Link Fence
F 1908-06, Guide for Fences for Residential Outdoor Swimming Pools, Hot Tubs, and Spas
F15 on Consumer Products
WITHDRAWAL OF STANDARD
Volume 15.07
F 1822-97, Consumer Safety Specification for Non-Full-Size Baby Cribs
F16 on Fasteners
NEW STANDARD
Volume 01.08
F 2280-06, Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength
REVISION OF STANDARD
Volume 01.08
F 468-06, Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use
F 2403-06, Specification for Inch Series Machine Screws, Carbon Steel, 60 000 psi Tensile Strength
F17 on Plastic Piping Systems
NEW STANDARD
Volume 08.04
F 2509-06, Specification for Field-Assembled Anodeless Riser Kits for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing
REVISION OF STANDARD
Volume 08.04
F 1803-06, Specification for Poly (Vinyl Chloride) (PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter
F 2021-06 (Includes change to title), Guide for Design and Installation of Plastic Siphonic Roof Drainage Systems
EDITORIAL CHANGE
Volume 08.04
F 480-02e1, Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR) , SCH 40 and SCH 80
F20 on Hazardous Substances and Oil Spill Response
NEW STANDARD
Volume 11.05
F 2532-06, Guide for Determining Net Environmental Benefit of Dispersant Use
REAPPROVAL OF STANDARD
Volume 11.05
F 625-94(2006)
F 2008-00(2006)
F24 on Amusement Rides and Devices
REVISION OF STANDARD
Volume 15.07
F 770-06, Practice for Ownership and Operation of Amusement Rides and Devices
F26 on Food Service Equipment
REVISION OF STANDARD
Volume 15.08
F 1114-06, Specification for Heat Sanitizing Commercial Pot, Pan, and Utensil Station Rack Type Water-Driven Rotary Spray
F 1150-06, Specification for Commercial Food Waste Pulper and Waterpress Assembly
F 1202-06, Specification for Washing Machines, Heat Sanitizing, Commercial, Pot, Pan, and Utensil Vertically Oscillating Arm Type
F 1203-06, Specification for Washing Machines-Pot, Pan, and Utensil, Heat Sanitizing, Commercial Rotary Conveyor Type
F 1360-06, Specification for Ovens, Microwave, Electric
REAPPROVAL OF STANDARD
Volume 15.08
F 760-93(2006)
|
