|
E06 on Performance of Buildings
NEW STANDARD
Volume 04.12, 2005
E 2264-05, Practice for Determining the Effects of Temperature Cycling on Fenestration Products
REVISION OF STANDARD
Volume 04.11, 2005
E 72-05, Test Methods of Conducting Strength Tests of Panels for Building Construction
E 866-05, Specification for Corrosion-inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels
E 1307-05, Practice for Surface Preparation and Structural Adhesive Bonding of Precured, Nonmetallic Composite Facings to Structural Core for Flat Shelter Panels
Volume 04.12, 2005
E 1773-05, Practice for Sealing Rigid Wall Tactical Shelters with Polysulfide Based Sealants
E 1826-05, Specification for Low Volatile Organic Compound Voc Corrosion-inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded
Volume 04.12, 2005
E 1996-05, Specification for Performance of Exterior Windows, Curtain Walls, Doors and Impact Protective Systems Impacted by Windborne Debris in Hurricanes
REAPPROVAL OF STANDARD
Volume 04.11, 2005
E 759-92 (2005)
E 760-92 (2005)
E 761-92 (2005)
E 937-93 (2005)
E 1334-95 (2005)
E 1399-97 (2005)
E 1410-91 (2005)
E 1464-92 (2005)
E 1612-94 (2005)
E 1660-95a(2005)
E 1661-95a(2005)
E 1662-95a(2005)
E 1664-95a(2005)
E 1665-95a(2005)
E 1666-95a(2005)
E 1667-95a(2005)
E 1668-95a(2005)
E 1669-95a(2005)
E 1670-95a(2005)
Volume 04.12, 2005
E 1671-95a(2005)
E 1679-95 (2005)
E 1692-95a(2005)
E 1693-95 (2005)
E 1694-95a(2005)
E 1700-95 (2005)
E 1701-95 (2005)
E 1783-96 (2005)
E08 on Fatigue and Fracture
EDITORIAL CHANGE
Volume 03.01, 2005
E 1290-02e1, Test Method for Crack-tip Opening Displacement Ctod Fracture Toughness Measurement
E 2368-04e1, Practice for Strain Controlled Thermomechanical Fatigue Testing
E11 on Quality and Statistics
EDITORIAL CHANGE
Volume 14.02, 2005
E 177-04e1, Practice for Use of the Terms Precision and Bias in ASTM Test Methods
E15 on Industrial and Specialty Chemicals
REAPPROVAL OF STANDARD
Volume 15.05, 2005
E 649-00 (2005)
E20 on Temperature Measurement
REVISION OF STANDARD
Volume 14.03, 2006
E 100-05, Specification for ASTM Hydrometers
E27 on Hazard Potential of Chemicals
REVISION OF STANDARD
Volume 14.02, 2005
E 698-05, Test Method for Arrhenius Kinetic Constants for Thermally Unstable Materials Using Differential Scanning Calorimetry and the Flynn/Wall/Ozawa Method
EDITORIAL CHANGE
Volume 14.02, 2005
E 1231-01 E01, Practice for Calculation of Hazard Potential Figures-of-Merit for Thermally Unstable Materials
REAPPROVAL OF STANDARD
Volume 14.02, 2005
E 680-79 (2005)
E28 on Mechanical Testing
REVISION OF STANDARD
Volume 03.01, 2005
E 23-05, Test Methods for Notched Bar Impact Testing of Metallic Materials
E 140-05, Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
E30 on Forensic Sciences
NEW STANDARD
Volume 14.02, 2005
E 2327-04, Practice for Quality Assurance of Laboratories Performing Seized-drug Analysis
E33 on Environmental Acoustics
REVISION OF STANDARD
Volume 04.06, 2005
E 336-05, Test Method for Measurement of Airborne Sound Attenuation Between Rooms in Buildings
E 1111-05, Test Method for Measuring the Interzone Attenuation of Open Office Components
REAPPROVAL OF STANDARD
Volume 04.06, 2005
E 1264-98 (2005)
E35 on Pesticides and Alternative Control Agents
REVISION OF STANDARD
Volume 11.05, 2005
E 609-05, Terminology Relating to Pesticides
E 938-05, Test Method for Effectiveness of Liquid, Gel, or Cream Insecticides Against Adult Human Lice
REAPPROVAL OF STANDARD
Volume 11.05, 2005
E 1073-01 (2005)
E37 on Thermal Measurements
REVISION OF STANDARD
Volume 14.02, 2005
E 1269-05, Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
E 1719-05, Test Method for Vapor Pressure of Liquids by Ebulliometry
REAPPROVAL OF STANDARD
Volume 14.02, 2005
E 1877-00 (2005)
E 2071-00 (2005)
E42 on Surface Analysis
REVISION OF STANDARD
Volume 03.06, 2005
E 902-05, Practice for Checking the Operating Characteristics of X-Ray Photoelectron Spectrometers
E44 on Solar, Geothermal and Other Alternative Energy Sources
REVISION OF STANDARD
Volume 12.02, 2005
E 927-05, Specification for Solar Simulation for Photovoltaic Testing
E 948-05, Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight
E 973-05, Test Method for Determination of the Spectral Mismatch Parameter Between a Photovoltaic Device and a Photovoltaic Reference Cell
E 1038-05, Test Method for Determining Resistance of Photovoltaic Modules to Hail by Impact with Propelled Ice Balls
E 1040-05, Specification for Physical Characteristics of Nonconcentrator Terrestrial Photovoltaic Reference Cells
E 1125-05, Test Method for Calibration of Primary Non-Concentrator Terrestrial Photovoltaic Reference Cells Using a Tabular Spectrum
E 1143-05, Test Method for Determining the Linearity of a Photovoltaic Device Parameter with Respect to a Test Parameter
E 1328-05, Terminology Relating to Photovoltaic Solar Energy Conversion
E 1362-05, Test Method for Calibration of Non-Concentrator Photovoltaic Secondary Reference Cells
E 1597-05, Test Method for Saltwater Pressure Immersion and Temperature Testing of Photovoltaic Modules for Marine Environments
E 2047-05, Test Method for Wet Insulation Integrity Testing of Photovoltaic Arrays
E 2236-05, Test Methods for Measurement of Electrical Performance and Spectral Response of Nonconcentrator Multijunction Photovoltaic Cells and Modules
E50 on Environmental Assessment, Risk Management and Corrective Action
REAPPROVAL OF STANDARD
Volume 11.04, 2005
D 6008-96 (2005)
E52 on Forensic Psychophysiology
REAPPROVAL OF STANDARD
Volume 14.02, 2004
E 2031-99 (2004)
|
