| D01 on Paint and Related Coatings, Materials, and Applications
NEW STANDARD
Volume 06.02, 2001
D 6487, Practice for Preparing Prints of Paste Printing Inks With
the Little Joe Offset Color Proofing Press
PS 124-00, Provisional Test Method for Measuring Maximum Spontaneous
Heating Temperature of Art Materials
REVISION OF STANDARD
Volume 06.01, 2001
D 609-00, Practice for Preparation of Cold-Rolled Steel Panels
for Testing Paint, Varnish, Conversion Coatings, and Related Coating
Products
D 3363-00, Test Method for Film Hardness by Pencil Test
Volume 06.02, 2001
D 3450-00, Test Method for Washability Properties of Interior
Architectural Coatings
D 3793-00, Test Method for Low-Temperature Coalescence of Latex
Paint Films
Volume 06.03, 2001
D 520-00, Specification for Zinc Dust Pigment
D02 Petroleum Products and Lubricants
NEW STANDARD
Volume 05.04, 2001
D 6483-99, Test Method for Evaluation of Diesel Engine Oils in
T-9 Diesel Engine
REVISION OF STANDARD
Volume 05.03, 2001
D 5863-00, Test Methods for Determination of Nickel, Vanadium,
Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic
Absorption Spectrometry
REAPPROVAL WITH EDITORIAL CHANGE
Volume 05.03, 2001
D 4950-95 (2000)e1
D03 on Gaseous Fuels
REAPPROVAL OF STANDARD
Volume 05.06, 1999
D 1072-90 (1999)
D 5503-94 (1999)
D05 on Coal and Coke
NEW STANDARD
Volume 05.06, 2000
D 6518-00, Practice for Bias Testing a Mechanical Coal Sampling
System
REVISION OF STANDARD
Volume 05.06, 2000
D 4621-99, Guide for Quality Management in an Organization that
Samples or Tests Coal and Coke
REAPPROVAL of STADNARD
Volume 05.06, 2000
D 293-93 (1999)
D 720-91 (1999)
REAPPROVAL WITH EDITORIAL CHANGE
Volume 05.06, 2000
D 167-93 (1999)e1
D06 on Paper and Paper Products
REVISION of STANDARD
Volume 15.09, 2001
D 3208-00, Specification for Manifold Papers for Permanent Records
D07 on Wood
CHANGE to DESIGNATION NUMBER
Volume 04.10, 2000
D 6305, Practice for Calculating Bending Strength Design Adjustment
Factors for Fire-Retardant-Treated Plywood Roof Sheathing
NEW STANDARD
Volume 04.10, 2000
D 6513-00, Practice for Calculating the Superimposed Load on Wood-Frame
Walls for Standard Fire-Endurance Tests
REVISION OF STANDARD
Volume 04.10, 2000
D 198-99, Test Methods of Static Tests of Lumber in Structural
Sizes
D 1036-99, Test Methods of Static Tests of Wood Poles
D09 on Electrical and Electronic Insulating Materials
REVISION OF STANDARD
Volume 10.01, 2001
D 1676-99, Test Methods for Film-Insulated Magnet Wire
REAPPROVAL of STAndARD
Volume 10.02, 2001
D 3376-88 (2000)
D 3394-94 (2000)
D16 on Aromatic Hydrocarbons and Related Chemicals
NEW STANDARD
Volume 06.04, 2001
D 6526-00, Test Method for Analysis of Toluene by Capillary Column
Gas Chromatography
D18 on Soil and Rock
REVISION of STANDARD
Volume 04.08, 2001
D 5080-00, Test Method for Rapid Determination of Percent Compaction
D19 on Water
FINAL WITHDRAWN
Volume 11.01, 2001
D 1889, Test Method for Turbidity of Water
NEW STANDARD
Volume 11.02, 2001
D 6508-00, Test Method for Determination of Dissolved Inorganic
Anions in Aqueous Matrices Using Capillary Ion Electrophoresis
and Chromate Electrolyte
REVISION of STANDARD
Volume 11.02, 2001
D 4516-00, Practice for Standardizing Reverse Osmosis Performance
Data
D20 on Plastics
REAPPROVAL OF STANDARD
Volume 08.01, 1999
D 2238-92 (1999)
Volume 08.01, 2000
D 731-95 (1999)
D 1249-92 (1999)
D 2222-94 (1999)
Volume 08.02, 2000
D 4001-93 (1999)
Volume 08.03, 2000
D 5272-92 (1999)
REAPPROVAL OF STANDARD WITH EDITORIAL CHANGE
Volume 08.02, 2000
D 2396-94 (1999)e1
D 2873-94 (1999)e1
D 3123-98 (1999)e1
Volume 08.03, 2000
D 5523-94 (1999)e1
WITHDRAWAL OF STANDARD
Volume 08.01, 1999
D 1939-94, Practice for Determining Residual Stresses in Extruded
or Molded Acrylonitrile-Butadiene-Styrene (ABS) Parts by Immersion
in Glacial Acetic Acid
Volume 08.01, 2000
D 1999-96a, Guide for Selection of Specimens and Test Parameters
from ISO/IEC Standards
Volume 08.02, 2000
D 2474-92, Specification for Vinyl Chloride Copolymer Resins
D 2841-94, Practice for Sampling Hollow Microspheres
D 3713-95, Test Method for Measuring Response of Solid Plastics
to Ignition by a Small Flame
Volume 08.03, 2000
D 2952-95, Specification for Ethylene Plastics
D 5437-93, Practice for Weathering of Plastics Under Marine Floating
Exposure
Volume 08.03, 2001
D 5208-91, Practice for Operating Fluorescent Uv and Condensation
Apparatus for Exposure of Photodegradable Plastics
D22 on Sampling and Analysis of Atmospheres
NEW STANDARD
Volume 11.03, 2000
D 6522-00, Test Method for Determination of Nitrogen Oxides, Carbon
Monoxide, and Oxygen Concentrations in Emissions From Natural
Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers,
and Process Heaters Using Portable Analyzers
REAPPROVAL OF STANDARD WITH EDITORIAL CHANGE
Volume 11.03, 2000
D 5014-94 (2000)e1
D30 on Composite Materials
NEW STANDARD
Volume 15.03, 2000
D 6507-00, Practice for Fiber Reinforcement Orientation Codes
for Composite Materials
REVISION OF STANdARD
Volume 15.03, 2000
E 1309-00, Guide for Identification of Fiber-Reinforced Polymer-Matrix
Composite Materials in Databases
E 1434-00, Guide for Recording Mechanical Test Data of Fiber-Reinforced
Composite Materials in Databases
D34 on Waste Management
REAPPROVAL OF STANDARD
Volume 11.04, 2000
E 959-83 (1999)
D35 on Geosynthetics
NEW STANDARD
Volume 04.09, 2001
D 6523-00, Guide for Evaluation and Selection of Alternative Daily
Covers (ADCs) for Sanitary Landfills
D 6524-00, Test Method for Measuring the Resiliency of Turf Reinforcement
Mats (TRMs)
D 6525-00, Test Method for Measuring Nominal Thickness of Permanent
Rolled Erosion Control Products
REVISION OF STANdARD
Volume 04.09, 2001
D 4751-99a, Test Method for Determining Apparent Opening Size
of a Geotextile
Copyright 2000, ASTM
Back to Top
|
