Bookmark and Share

All standards actions listed below have been approved by ballot and the Committee on Standards.

The new, revised, reapproved with editorial change, and other standards that include editorial changes are now available for sale or will be available within four weeks.

Standards are published in the Annual Book of ASTM Standards (the volume and year are listed with all actions). Each standard is also available as a separate reprint. ASTM standards under five pages cost $25 (members deduct 10%) for North American customers. Lengthier standards are priced higher. Contact ASTM with a purchase order, letter, phone call (610/832-9585); fax (610/832-9555); or e-mail (service@astm.org).

For immediate access, visit www.astm.org and choose from the following options:

Subscribe to online downloads via ASTM Standards Source™ and choose a subscription of 50, 200, or unlimited standards. For details, visit demo.astm.org.

Download standards via WebDoxx and view and print them locally or request a fax copy using WebFaxx. Locate your standards within the Store area of the Web site at the
Search for Individual Standards link.
Standardization News Search

July 2000 Approved Standards Actions
A Committees B Committees C Committees D Committees
E Committees F Committees G Committees
C01 on Cement

REVISION OF STANDARD
Volume 04.01, 2000
C 595-00, Specification for Blended Hydraulic Cements
C 1157-00, Performance Specification for Hydraulic Cement

C03 on Chemical-Resistant Nonmetallic Materials

REVISION OF STANDARD
Volume 04.05, 2001
C 397-00, Practice for Use of Chemically Setting Chemical-Resistant Silicate and Silica Mortars
C 531-00, Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

C08 on Refractories

REAPPROVAL OF STANDARD
Volume 15.01, 2001
C 861-93 (1993)

C09 on Concrete and Concrete Aggregates

REVISION OF STANDARD
Volume 04.02, 2000
C 233-00, Test Method for Air-Entraining Admixtures for Concrete
C 260-00, Specification for Air-Entraining Admixtures for Concrete
C 331-00, Specification for Lightweight Aggregates for Concrete Masonry Units

WITHDRAWAL OF STANDARD
Volume 04.02, 2000
C 234-91a, Test Method for Comparing Concretes on the Basis of the Bond Developed with Reinforcing Steel

C11 on Gypsum and Related Building Materials and Systems

CHANGE to DESIGNATION NUMBER
Volume 04.01, 2000
C 1396/C 1396M, Specification for Gypsum Board

C12 on Mortars and Grouts for Unit Masonry

REVISION OF STANDARD
Volume 04.05, 2001
C 270-00, Specification for Mortar for Unit Masonry

C16 on Thermal Insulation

NEW STANDARD
Volume 04.06, 2000
C 1393-00, Specification for Perpendicularly-Oriented Mineral Fiber Roll and Sheet Thermal Insulation for Pipes and Tanks

REVISION OF STANDARD
Volume 04.06, 2000
C 196-00, Specification for Expanded or Exfoliated Vermiculite Thermal Insulating Cement
C 552-00, Specification for Cellular Glass Thermal Insulation
C 553-99, Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications
C 612-00, Specification for Mineral Fiber Block and Board Thermal Insulation
C 726-00, Specification for Mineral Fiber Roof Insulation Board
C 1015-99, Practice for Installation of Cellulosic and Mineral Fiber Loose-Fill Thermal Insulation
C 1320-99, Practice for Installation of Mineral Fiber Batt and Blanket Thermal Insulation for Light Frame Construction

C18 on Dimension Stone

REAPPROVAL OF STANDARD
Volume 04.07, 2000
C 170-90 (1999)

C24 on Building Seals and Sealants

REVISION OF STANDARD
Volume 04.07, 2000
C 834-00, Specification for Latex Sealants
C 908-00, Test Method for Yield Strength of Preformed Tape Sealants
C 972-00, Test Method for Compression-Recovery of Tape Sealant
C 1087-00, Test Method for Determining Compatibility of Liquid-Applied Sealants With Accessories Used in Structural Glazing Systems
C 1135-00, Test Method for Determining Tensile Adhesion Properties of Structural Sealants
C 1184-00, Specification for Structural Silicone Sealants
C 1375-00, Guide for Substrates Used in Testing Building Seals and Sealants
C 1392-00, Guide for Evaluating Failure of Structural Sealant Glazing
D 2202-00, Test Method for Slump of Sealants

REAPPROVAL OF STANDARD
Volume 04.07, 2000
C 1193-91 (1999)

Copyright 2000, ASTM

Back to Top