|
|
F01 on Electronics
• REVISION OF STANDARD
Volume 10.05, 2002
F 1570-01, Test Method for Determining the Tactile Ratio of a
Membrane Switch
• EDITORIAL CHANGE
Volume 10.04, 2002
F 2113-01, Guide for Analysis and Reporting the Impurity Content
and Grade of High Purity Metallic Sputtering Targets for Electronic
Thin Film Applications
F04 on Medical and Surgical Materials and Devices
• NEW STANDARD
Volume 13.01, 2002
F 2118-01, Test Method for Constant Amplitude of Force Controlled
Fatigue Testing of Acrylic Bone Cement Materials
• REVISION OF STANDARD
Volume 13.01, 2002
F 2068-01, Specification for Femoral Prostheses—Metallic Implants
• EDITORIAL CHANGE
Volume 13.01, 2002
F 2102-01e1, Guide for Evaluating the Extent of Oxidation in Ultra-High-Molecular-Weight
Polyethylene Fabricated Forms Intended for Surgical Implants
F08 on Sports Equipment and Facilities
• NEW STANDARD
Volume 15.07, 2001
F 2115-01, Specification for Motorized Treadmills
F09 on Tires
• REVISION OF STANDARD
Volume 09.02, 2002
F 1046-01, Guide for Preparing Artificially Worn Passenger and
Light Truck Tires for Testing
• REAPPROVAL OF STANDARD
Volume 09.02, 2002
F 1016-93 (2001)
F 1806-97 (2001)
F15 on Consumer Products
• REVISION OF STANDARD
Volume 15.07, 2001
F 2090-01a, Specification for Window Fall Prevention Devices with
Emergency Escape Egress Release Mechanisms
F16 on Fasteners
• REVISION OF STANDARD
Volume 01.08, 2001
F 467-01a, Specification for Nonferrous Nuts for General Use
F 606M-01, Test Methods for Determining the Mechanical Properties
of Externally and Internally Threaded Fasteners, Washers, and
Rivets [Metric]
• EDITORIAL CHANGE
Volume 01.08, 2002
F 468-01ae1 (Includes change to title), Specification for Nonferrous
Bolts, Hex Cap Screws, and Studs for General Use
F 594-01 (Includes change to title), Specification for Stainless
Steel Nuts
F17 on Plastic Piping Systems
• NEW STANDARD
Volume 08.04, 2001
F 2098-01, Specification for Metal Insert Fittings Utilizing a
Stainless Steel Clamp for SDR9 Crosslink
F 2136-01, Test Method for Notched, Constant Ligament-Stress Ncls
Test to Determine Slow-Crack-Growth Resistance of Hdpe Resins
or Hdpe Corrugated Pipe
F 2138-01, Specification for Excess Flow Valves for Natural Gas
Service
• REVISION OF STANDARD
Volume 08.04, 2001
D 2104-01, Specification for Polyethylene Pe Plastic Pipe, Schedule
40
D 2239-01, Specification for Polyethylene Pe Plastic Pipe SIDR-PR
Based on Controlled Inside Diameter
D 2447-01, Specification for Polyethylene Pe Plastic Pipe, Schedules
40 and 80, Based on Outside Diameter
D 2513-01a, Specification for Thermoplastic Gas Pressure Pipe,
Tubing, and Fittings
D 2661-01, Specification for Acrylonitrile-Butadiene-Styrene ABS
Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings
D 2665-01, Specification for Poly(Vinyl Chloride) (PVC) Plastic
Drain, Waste, and Vent Pipe and Fittings
D 2680-01, Specification for Acrylonitrile-Butadiene-Styrene ABS
and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
D 2737-01, Specification for Polyethylene PE Plastic Tubing
D 2837-01, Test Method for Obtaining Hydrostatic Design Basis
for Thermoplastic Pipe Materials
D 2949-01, Specification for 3.25-in. Outside Diameter PPoly(Vinyl
Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
D 3035-01, Specification for Polyethylene (PE) Plastic Pipe (Dr-Pr)
Based on Controlled Outside Diameter
F 628-01, Specification for Acrylonitrile-Butadiene-Styrene ABS
Schedule 40 Plastic Drain, Waste, and Vent Pipe with a Cellular
Core
F 714-01, Specification for Polyethylene PE Plastic Pipe Sdr-Pr
Based on Outside Diameter
F 1176-01 (Includes change to title), Practice for Design and
Installation of Underground Thermoplastic Irrigation Systems with
Maximum Working Pressure of 125 psi
F 1499-01, Specification for Coextruded Composite Drain, Waste,
and Vent Pipe Dwv
F 1697-01a, Specification for Poly(Vinyl Chloride) (PVC) Profile
Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing
Sewers and Conduit
F 1741-01, Practice for Installation of Machine Spiral Wound Poly(Vinyl
Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers
and Conduits
• EDITORIAL CHANGE
Volume 08.04, 2001
F 1974-01 (Includes change to title), Specification for Metal
Insert Fittings for Polyethylene/ Aluminum/Polyethylene and Crosslinked
Polyethylene/ Aluminum/Crosslinked Polyethylene Composite Pressure
F18 on Electrical Protective Equipment for Workers
• REAPPROVAL OF STANDARD
Volume 10.03, 2002
F 1236-96 (2001)
F20 on Hazardous Substances and Oil Spill Response
• REAPPROVAL OF STANDARD
Volume 11.04, 2001
F 1084-90 (2001)
F 1522-95 (2001)
F 1524-95 (2001)
F 1525-96 (2001)
F 1600-95a(2001)
• WITHDRAWAL OF STANDARD
Volume 11.04, 2001
F 930-85(1993)e1, Guide for Ecological Considerations for the
Use of Chemical Dispersants in Oil Spill Response—Rocky Shores
F 933-85(1994)e1, Guide for Evaluation of Oil Water Separation
Systems for Spilled Oil Recovery Applications
F 972-86(1993)e1, Guide for Ecological Considerations for the
Use of Chemical Dispersants in Oil Spill Response—Nearshore Subtidal
F 973-86(1993)e1, Guide for Ecological Considerations for the
Use of Chemical Dispersants in Oil Spill Response: Tidal Flats
F 990-86(1993)e1, Guide for Ecological Considerations for Use
of Chemical Dispersants in Oil Spill Response—Sandy Beaches
F 999-86(1993)e1, Guide for Ecological Considerations for the
Use of Chemical Dispersants in Oil Spill Response—Gravel/ Cobble
Beaches
F 1008-86(1993)e1, Guide for Ecological Considerations for the
Use of Chemical Dispersants in Oil Spill Response—Salt Marshes
F 1010-86(1993)e1, Guide for Ecological Considerations for the
Use of Chemical Dispersants in Oil Spill Response—Bird Habitats
F23 on Protective Clothing
• NEW STANDARD
Volume 11.03, 2001
F 2130-01, Test Method for Measuring Repellency, Retention, and
Penetration of Liquid Pesticide Formulation Through Protective
Clothing Materials
Copyright 2002, ASTM
Back to Contents |
