|
D01 on Paint and Related Coatings, Materials, and Applications
REAPPROVAL OF STANDARD
Volume 06.01
D 772-86(2005)
D02 on Petroleum Products and Lubricants
REVISION OF STANDARD
Volume 05.01
D 189-05, Test Method for Conradson Carbon Residue of Petroleum Products
D 721-05, Test Method for Oil Content of Petroleum Waxes
D 808-05, Test Method for Chlorine in New and Used Petroleum Products Bomb Method
D 893-05a, Test Method for Insolubles in Used Lubricating Oils
D 938-05, Test Method for Congealing Point of Petroleum Waxes, Including Petrolatum
D 1015-05, Test Method for Freezing Points of High-Purity Hydrocarbons
D 1016-05, Test Method for Purity of Hydrocarbons from Freezing Points
D 1092-05, Test Method for Measuring Apparent Viscosity of Lubricating Greases
D 2158-05, Test Method for Residues in Liquefied Petroleum Lp Gases
D 2273-05, Test Method for Trace Sediment in Lubricating Oils
D 2622-05, Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-Ray Fluorescence Spectrometry
D 2892-05, Test Method for Distillation of Crude Petroleum 15-Theoretical Plate Column
D 3228-05, Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method
D 3230-05a, Test Method for Salts in Crude Oil Electrometric Method
Volume 05.02
D 3235-05, Test Method for Solvent Extractables in Petroleum Waxes
D 3240-05, Test Method for Undissolved Water in Aviation Turbine Fuels
D 3241-05b, Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels Jftot Procedure
D 3242-05, Test Method for Acidity in Aviation Turbine Fuel
D 3336-05, Test Method for Life of Lubricating Greases in Ball Bearings at Elevated Temperatures
D 3338-05, Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
D 3343-05, Test Method for Estimation of Hydrogen Content of Aviation Fuels
D 4175-05, Terminology Relating to Petroleum, Petroleum Products, and Lubricants
D 4628-05, Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry
D 4739-05, Test Method for Base Number Determination by Potentiometric Titration
D 5000-05, Practice for Evaluating Activity of Clay Elements Using a Side-Stream Sensor
D 5185-05, Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission
Volume 05.03
D 5579-05, Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants in a Cyclic Durability Test
D 5704-05b, Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles
D 5708-05, Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma Icp Atomic Emission Spectrometry
D 5967-05, Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
D 5972-05, Test Method for Freezing Point of Aviation Fuels Automatic Phase Transition Method
D 6121-05a, Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles
D 6376-05, Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-Ray Fluorescence Spectroscopy
D 6550-05, Test Method for Determination of Olefin Content of Gasolines by Supercritical-Fluid Chromatography
Volume 05.04
D 6593-05a, Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-temperature, Light-Duty Conditions
D 6594-05, Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 135 Deg°C
D 6615-05a, Specification for Jet B Wide-Cut Aviation Turbine Fuel
D 6618-05, Test Method for Evaluation of Engine Oils in Diesel Four-Stroke Cycle Supercharged 1m-pc Single Cylinder Oil Test Engine
D 6681-05, Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine --Caterpillar 1p Test Procedure
D 6709-05, Test Method for Evaluation of Automotive Engine Oils in the Sequence Viii Spark-Ignition Engine Clr Oil Test Engine
D 6750-05a, Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine --1k Procedure 0.4 Fuel Sulfur and 1n Procedure 0.04 Fuel Sulfur
D 6837-05a, Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence Vib Spark Ignition Engine
D 6891-05a, Test Method for Evaluation of Automotive Engine Oils in the Sequence IVA Spark-Ignition Engine
D 6923-05, Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine --caterpillar 1r Test Procedure
D 6984-05a, Test Method for Evaluation of Automotive Engine Oils in the Sequence Iiif, Spark-Ignition Engine
D 6987/D 6987M-05a, Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine
D 7038-05a, Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants
D 7109-05, Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus at 30 and 90 Cycles
D 7112-05a, Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer Optical Detection
Volume 05.05
C 714-05, Test Method for Thermal Diffusivity of Carbon and Graphite by Thermal Pulse Method
EDITORIAL CHANGE
Volume 05.01
D 130-04e1, Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
REAPPROVAL OF STANDARD
Volume 05.01
D 1094-00(2005)
D 1550-94(2005)
D 2501-91(2005)
D 2889-95(2005)
Volume 05.02
D 3238-95(2005)
D 4178-82(2005)
D 4860-91(2005)
D 4864-90(2005)
D 5002-99(2005)
D 5274-00(2005)
Volume 05.03
D 5599-00(2005)
D 6139-00(2005)
D 6184-98(2005)
D 6384-99a(2005)
Volume 05.04
D 6560-00(2005)
D 6731-01(2005)
Volume 05.05
C 838-96(2005)
D03 on Gaseous Fuels
EDITORIAL CHANGE
Volume 05.06
D 3956-93(2003)e1, Specification for Methane Thermophysical Property Tables
D07 on Wood
REVISION OF STANDARD
Volume 04.10
D 3737-05, Practice for Establishing Allowable Properties for Structural Glued Laminated Timber Glulam
D 5456-05a, Specification for Evaluation of Structural Composite Lumber Products
D08 on Roofing and Waterproofing
REVISION OF STANDARD
Volume 04.04
D 228-05b, Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing
D11 on Rubber
NEW STANDARD
Volume 09.02
D 7198-05, Specification for Disposable Embalming Gloves for Single-Use Applications
REVISION OF STANDARD
Volume 09.01
D 4936-05, Test Method for Mercaptobenzothiazole Sulfenamide Assay by Reduction/Titration
D14 on Adhesives
REVISION OF STANDARD
Volume 15.06
D 3121-05, Test Method for Tack of Pressure-Sensitive Adhesives by Rolling Ball
D15 on Engine Coolants
REVISION OF STANDARD
Volume 15.05
D 3306-05, Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service
D 4985-05, Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (Sca)
D 5752-05, Specification for Supplemental Coolant Additives (SCAs) for Use in Precharging Coolants for Heavy-Duty Engines
E 1177-05, Specification for Engine Coolant Grade Glycol
REAPPROVAL OF STANDARD
Volume 15.05
D 3634-99(2005)
D16 on Aromatic Hydrocarbons and Related Chemicals
REVISION OF STANDARD
Volume 06.04
D 5386-05, Test Method for Color of Liquids Using Tristimulus Colorimetry
D18 on Soil and Rock
NEW STANDARD
Volume 04.08
D 4633-05, Test Method for Stress Wave Energy Measurement for Dynamic Penetrometer Testing Systems
REVISION OF STANDARD
Volume 04.08
D 2922-05, Test Methods for Density of Soil and Soil-Aggregate in Place by Nuclear Methods Shallow Depth
D 3017-05, Test Method for Water Content of Soil and Rock in Place by Nuclear Methods Shallow Depth
D 3441-05, Test Method for Mechanical Cone Penetration Tests of Soil
D 4318-05, Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
D 4623-05, Test Method for Determination of in Situ Stress in Rock Mass by Overcoring Method—usbm Borehole Deformation Gage
D 5334-05, Test Method for Determination of Thermal
Conductivity of Soil and Soft Rock by Thermal Needle Probe Procedure
Volume 04.09
D 1883-05, Test Method for Cbr (California Bearing Ratio) of Laboratory-Compacted Soils
D 5731-05, Test Method for Determination of the Point Load Strength Index of Rock
D 5873-05, Test Method for Determination of Rock Hardness by Rebound Hammer Method
D 6941-05, Practice for Measuring Fluidization Segregation Tendencies of Powders
REAPPROVAL OF STANDARD
Volume 04.08
D 4555-01(2005)
WITHDRAWAL OF STANDARD
Volume 04.08
D 3148-02, Test Method for Elastic Moduli of Intact Rock Core Specimens in Uniaxial Compression
D 4341-03, Test Method for Creep of Hard Rock Core Specimens in Uniaxial Compression at Ambient or Elevated Temperature
D 4405-04, Test Method for Creep of Soft Rock Core Specimens in Uniaxial Compression at Ambient or Elevated Temperature
D 4406-04, Test Method for Creep of Rock Core Specimens in Triaxial Compression at Ambient or Elevated Tempertures
D 5407-95(2000), Test Method for Elastic Moduli of Undrained Intact Rock Core Specimens in Triaxial Compression Without Pore Pressure Measurement
D20 on Plastics
NEW STANDARD
Volume 08.03
D 7191-05, Test Method for Determination of Moisture in Plastics by Relative Humidity Sensor
D 7211-05, Specification for Parts Machined from Polychlorotrifluoroethylene (PCTFE) and Intended for General Use
REVISION OF STANDARD
Volume 08.01
D 256-05a, Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
D 618-05, Practice for Conditioning Plastics for Testing
D 788-05, Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds
Volume 08.02
D 3769-05, Test Method for Microcellular Urethanes --High-Temperature Sag
D 4508-05, Test Method for Chip Impact Strength of Plastics
D 4812-05, Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics
Volume 08.03
D 6110-05a, Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
D 6395-05, Test Method for Flatwise Flexural Impact Resistance of Rigid Plastics
Volume 08.04
D 5677-05, Specification for Fiberglass Glass-Fiber-Reinforced Thermosetting-Resin Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines
D 5685-05, Specification for “Fiberglass” Glass-Fiber-Reinforced Thermosetting-Resin Pressure Pipe Fittings
REAPPROVAL OF STANDARD
Volume 08.04
D 3840-01(2005)
D 4161-01(2005)
D21 on Polishes
REAPPROVAL OF STANDARD
Volume 15.04
D 3757-89(2005)e1
D22 on Air Quality
NEW STANDARD
Volume 11.03
D 7202-05, Test Method for Determination of Beryllium in the Workplace Using Field-Based Extraction and Fluorescence Detection
D27 on Electrical Insulating Liquids and Gases
REVISION OF STANDARD
Volume 10.03
D 4652-05, Specification for Silicone Fluid Used for Electrical Insulation
EDITORIAL CHANGE
Volume 10.03
D 2668-02e1, Test Method for 2,6-Di-Tert-Butyl-P-Cresol and 2,6-Di-Tert-Butyl Phenol in Electrical Insulating Oil by Infrared Absorption
REAPPROVAL OF STANDARD
Volume 10.03
D 1533-00(2005)
D 1807-00(2005)
D 1934-95(2005)
D 2759-00(2005)
D 3305-94(2005)
D 3635-01(2005)
D 5837-99(2005)
D34 on Waste Management
NEW STANDARD
Volume 11.04
D 7203-05, Test Method for Screening Trichloroethylene (TCE) -Contaminated Soil Using a Heated Diode Sensor
|
