|
D02 on Petroleum Products and Lubricants
NEW STANDARD
Volume 05.04
D 7261-06, Test Method for Determining Water Separation Characteristics of Diesel Fuels by Portable Separometer
REVISION OF STANDARD
Volume 05.03
D 5797-06, Specification for Fuel Methanol (M70-M85) for Automotive Spark-Ignition Engines
D 5798-06, Specification for Fuel Ethanol (Ed75-Ed85) for Automotive Spark-Ignition Engines
D 6021-06, Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection
D 6378-06, Test Method for Determination of Vapor Pressure (VPx) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method)
Volume 05.04
D 6751-06a, Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
Volume 05.05
D 6890-06, Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
EDITORIAL CHANGE
Volume 05.02
D 4175-05e1, Terminology Relating to Petroleum, Petroleum Products, and Lubricants
WITHDRAWAL OF STANDARD
Volume 05.01
D 1367-96(2001), Test Method for Lubricating Qualities of Graphites
D 2569-97(2002), Test Method for Distillation of Pitch
D04 on Road and Paving Materials
REVISION OF STANDARD
Volume 04.03
D 6925-06, Test Method for Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
D05 on Coal and Coke
REVISION OF STANDARD
Volume 05.06
D 2798-06, Test Method for Microscopical Determination of the Vitrinite Reflectance of Coal
D 4371-06, Test Method for Determining the Washability Characteristics of Coal
D07 on Wood
REVISION OF STANDARD
Volume 04.10
D 3737-06, Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam)
REAPPROVAL OF STANDARD
Volume 04.10
D 2718-00(2006)
D 3043-00(2006)
D 3044-94(2006)
D 6643-01(2006)
D08 on Roofing and Waterproofing
NEW STANDARD
Volume 04.04
E 1918-06, Test Method for Measuring Solar Reflectance of Horizontal and Low-Sloped Surfaces in the Field
D10 on Packaging
REVISION OF STANDARD
Volume 15.10
D 3611-06, Practice for Accelerated Aging of Pressure-Sensitive Tapes
D 3950-06, Specification for Strapping, Nonmetallic (and Joining Methods)
D 4728-06, Test Method for Random Vibration Testing of Shipping Containers
D 5330/D 5330M-06, Specification for Pressure-Sensitive Tape for Packaging, Filament-reinforced
D 5486/D 5486M-06, Specification for Pressure-Sensitive Tape for Packaging, Box Closure, and Sealing
D11 on Rubber
REAPPROVAL OF STANDARD WITH EDITORIAL CHANGE
Volume 09.01
D 5992-96(2006)
D14 on Adhesives
REAPPROVAL OF STANDARD
Volume 15.06
D 1151-00(2006)
D 1488-00(2006)
D 1490-01(2006)
D 2094-00(2006)
D 3310-00(2006)
D 3434-00(2006)
D 4426-01(2006)
WITHDRAWAL OF STANDARD
Volume 15.06
D 898-05, Test Method for Applied Weight Per Unit Area of Dried Adhesive Solids
D18 on Soil and Rock
NEW STANDARD
Volume 04.09
D 6938-06, Test Methods for In-place Density and Water Content of Soil and Soil-aggregate by Nuclear Methods (Shallow Depth)
WITHDRAWAL OF STANDARD
Volume 04.08
D 2901-99, Test Method for Cement Content of Freshly Mixed Soil-cement
D19 on Water
REVISION OF STANDARD
Volume 11.01
D 1129-06a, Terminology Relating to Water
D20 on Plastics
REVISION OF STANDARD
Volume 08.01
D 788-06, Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds
D 789-06a (Includes change to title), Test Methods for Determination of Solution Viscosities of Polyamide (PA)
D 957-06, Practice for Determining Surface Temperature of Molds for Plastics
D 1042-06, Test Method for Linear Dimensional Changes of Plastics Under Accelerated Service Conditions
D 1784-06, Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride)(CPVC) Compounds
D 1938-06, Test Method for Tear-propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method
D 1998-06, Specification for Polyethylene Upright Storage Tanks
D 2583-06, Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
Volume 08.02
D 3763-06, Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors
D 3801-06, Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
D 4101-06a, Specification for Polypropylene Injection and Extrusion Materials
D 4204-06, Practice for Preparing Plastic Film Specimens for a Round-Robin Study
D 4660-06, Test Methods for Polyurethane Raw Materials Determination of the Isomer Content of Toluenediisocyanate
Volume 08.03
D 4459-06, Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications
D 4890-06, Test Methods for Polyurethane Raw Materials Determination of Gardner and APHA Color of Polyols
D 5026-06, Test Method for Plastics Dynamic Mechanical Properties in Tension
D 5204-06, Classification System for Polyamide-Imide (PAI) Molding and Extrusion Materials
D 5628-06, Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
Volume 08.04
D 2310-06, Classification for Machine-made Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
D 3679-06a, Specification for Rigid Poly(vinyl Chloride) (PVC) Siding
D 5365-06, Test Method for Long-term Ring-bending Strain of Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
EDITORIAL CHANGE
Volume 08.04
D 7251-06e1, Specification for Color and Appearance Retention of Variegated Color Plastic Siding Products
REAPPROVAL OF STANDARD
Volume 08.01
D 542-00(2006)
Volume 08.04
D 2924-01(2006)
D24 on Carbon Black
EDITORIAL CHANGE
Volume 09.01
D 3493-06e1, Test Method for Carbon Black-Oil Absorption Number of Compressed Sample (COAN)
D30 on Composite Materials
NEW STANDARD
Volume 15.03
D 7249/D 7249M-06, Test Method for Facing Properties of Sandwich Constructions by Long Beam Flexure
D31 on Leather
EDITORIAL CHANGE
Volume 15.04
D 7255-06e1, Test Method for Abrasion Resistance of Leather (Rotary Platform, Double-Head Method)
D35 on Geosynthetics
REVISION OF STANDARD
Volume 04.13
D 6243-06, Test Method for Determining the Internal and Interface Shear Resistance of Geosynthetic Clay Liner by the Direct Shear Method
|
