Bookmark and Share
All standards actions listed below have been approved by ballot and the Committee on Standards.

The new, revised, reapproved with editorial change, and other standards that include editorial changes are now available for sale or will be available within four weeks.

Standards are published in the Annual Book of ASTM Standards (the volume and year are listed with all actions). Each standard is also available as a separate reprint. ASTM standards under five pages cost $25 (members deduct 10%) for North American customers. Lengthier standards are priced higher. Contact ASTM with a purchase order, letter, phone call (610/832-9585); fax (610/832-9555); or e-mail (service@astm.org).

For immediate access, visit www.astm.org and choose from the following options:

Subscribe to online downloads via ASTM Standards Source™ and choose a subscription of 50, 200, or unlimited standards. For details, visit demo.astm.org.

Download standards via WebDoxx and view and print them locally or request a fax copy using WebFaxx. Locate your standards within the Store area of the Web site at the
Search for Individual Standards link.
Standardization News Search

December 2000 Approved Standards Actions
A Committees B Committees C Committees D Committees
E Committees F Committees G Committees
A01 on Steel, Stainless Steel and Related Alloys

NEW STANDARD
Volume 01.03, 2001
A 1010-00, Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet, and Strip
A 1011-00, Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability

REVISION OF STANDARD
Volume 01.01, 2001
A 182/A 182m-00b, Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
A 182/A 182m-00a, Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
A 182/A 182m-00, Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
A 312/A 312m-00b, Specification for Seamless and Welded Austenitic Stainless Steel Pipes
Volume 01.02, 2001
A 351/A 351m-00, Specification for Castings, Austenitic, Austenitic-Ferritic Duplex for Pressure-Containing Parts
A 744/A 744m-00, Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service
A 781/A 781m-00, Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use
A 990-00, Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure Retaining Parts for Corrosive Service
Volume 01.03, 2001
A 109/A 109m-00, Specification for Steel, Strip, Carbon 0.25 Maximum Percent Cold-Rolled
A 276-00a, Specification for Stainless Steel Bars and Shapes
A 568/A 568m-00b, Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
A 635/A 635m-00, Specification for Steel, Sheet and Strip, Heavy-Thickness Coils Carbon
A 1008-00, Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability
Volume 01.04, 2001
A 6/A 6m-00a, Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
A 20/A 20m-00a, Specification for General Requirements for Steel Plates for Pressure Vessels
A 612/A 612m-00, Specification for Pressure Vessel Plates, Carbon Steel, High Strength for Moderate and Lower Temperature Service
A 633/A 633M-00a, Specification for Normalized High-Strength Low-Alloy Structural Steel Plates
A 656/A 656m-00a, Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability
A 767/A 767m-00a, Specification for Zinc-Coated Galvanized Steel Bars for Concrete Reinforcement
A 808/A 808m-00a, Specification for High-Strength, Low-Alloy Carbon, Manganese, Columbium, Vanadium Steel of Structural Quality with Improved Notch Toughness
A 934/A 934m-00, Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars
A 951-00, Specification for Masonry Joint Reinforcement
Volume 01.05, 2001
A 965/A 965m-00, Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts
A 982-00, Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils

REAPPROVAL OF STANDARD
Volume 01.02, 2001
A 27/A 27m-95 (2000)
Volume 01.03, 2001
A 492-95 (2000)
A 493-95 (2000)
A 581/A0581m-95b(2000)
Volume 01.05, 2001
A 311/A 311m-95 (2000)
A 331-95 (2000)
A 355-89 (2000)
A 400-69 (2000)
A 434-90a(2000)
A 576-90b(2000)
A 663/A 663M-89 (2000)
A 675/A 675m-90a(2000)
A 696-90a(2000)
A 739-90a(2000)

WITHDRAWAL OF STANDARD
Volume 01.03, 2001
A 366/A 366m-97e1, Specification for Commercial Steel (CS) Sheet, Carbon, (0.15 Maximum Percent) Cold-Rolled
A 569/A 569m-98, Specification for Steel, Carbon (0.15 Maximum, Percent), Hot-Rolled Sheet and Strip Commercial
A 570/A 570m-98, Specification for Steel, Sheet and Strip, Carbon, Hot-Rolled, Structural Steel
A 607-98, Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Columbium or Vanadium, or Both, Hot-Rolled and Cold-Rolled
A 611-97, Specification for Structural Steel (SS), Sheet, Carbon, Cold-Rolled
A 620/A 620m-97, Specification for Drawing Steel (DS), Sheet, Carbon, Cold-Rolled
A 622/A 622m-97, Specification for Drawing Steel (DS), Sheet and Strip, Carbon, Hot-Rolled
A 715-98, Specification for Steel Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled, and Steel Sheet, Cold-Rolled, High-Strength, Low-Alloy, with Improved Formability
A 963-97, Specification for Deep Drawing Steel (DDS), Sheet, Carbon, Cold-Rolled
A 969-97, Specification for Extra Deep Drawing Steel (EDDS), Sheet, Carbon, Cold-Rolled

EPSILON
Volume 01.01, 2001
A 268/A 268m-00ae1 (Includes change to title), Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service
A 790/A 790m-00ae1 (Includes change to title), Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
Volume 01.05, 2001
A 29/A 29m-99e1 (Includes change to title), Specification for Steel Bars, Carbon and Alloy, Hot-Wrought and Cold-Finished, General Requirements for Type of Action

JURISIDCTION CHANGE
Volume 01.01, 2001
A 530/A 530m, Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
Volume 01.05, 2001
A 700, Practices for Packaging, Marking, and Loading Methods for Steel Products for Domestic Shipment

A05 on Metallic-Coated Iron and Steel Products

REVISION OF STANDARD
Volume 01.06, 2001
A 153-00, Specification for Zinc Coating Hot-Dip on Iron and Steel Hardware
A 796/A 796m-00, Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications
A 849-00, Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe

REAPPROVAL OF STANDARD
Volume 01.06, 2000
A 90/A 90m-95a(1999)

Copyright 2000, ASTM

Back to Contents