|
|
|
C01 on Cement
REVISION OF STANDARD
Volume 04.01
C 451-05, Test Method for Early Stiffening of Hydraulic Cement (Paste Method)
C 807-05, Test Method for Time of Setting of Hydraulic Cement Mortar by Modified Vicat Needle
C07 on Lime
REVISION OF STANDARD
Volume 04.01
C 911-05 (Includes change to title), Specification for Quicklime, Hydrated Lime, and Limestone for Chemical and Industrial Uses
C08 on Refractories
REVISION OF STANDARD
Volume 15.01
C 1171-05, Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories
WITHDRAWAL OF STANDARD
Volume 15.01
C 1100-88(1998), Test Method for Ribbon Thermal Shock Testing of Refractory Materials
C09 on Concrete and Concrete Aggregates
REVISION OF STANDARD
Volume 04.02
C 143/C 143M-05, Test Method for Slump of Hydraulic-Cement Concrete
C 192/C 192M-05, Practice for Making and Curing Concrete Test Specimens in the Laboratory
C 341/C 341M-05, Practice for Length Change of Cast, Drilled, or Sawed Specimens of Hydraulic-Cement Mortar and Concrete
C 441-05, Test Method for Effectiveness of Pozzolans or Ground Blast-Furnace Slag in Preventing Excessive Expansion of Concrete Due to the Alkali-Silica Reaction
C 494/C 494M-05, Specification for Chemical Admixtures for Concrete
C 1105-05, Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction
C 1260-05, Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)
C 1293-05, Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction
C 1435-05, Practice for Molding Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Hammer
C 1602/C 1602M-05, Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete
REAPPROVAL OF STANDARD
Volume 04.02
C 944-99(2005)
C11 on Gypsum and Related Building Materials and Systems
REVISION OF STANDARD
Volume 04.01
C 11-05, Terminology Relating to Gypsum and Related Building Materials and Systems
C 842-05, Specification for Application of Interior Gypsum Plaster
C 1264-05 (Includes change to title), Specification for Sampling, Inspection, Rejection, Certification, Packaging, Marking, Shipping, Handling, and Storage of Gypsum Panel Products
C15 on Manufactured Masonry Units
REAPPROVAL OF STANDARD
Volume 04.05
C 126-99(2005)
C16 on Thermal Insulation
REVISION OF STANDARD
Volume 04.06
C 203-05, Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
C 692-05, Test Method for Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel
C 1029-05, Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation
EDITORIAL CHANGE
Volume 04.06
C 929-94(2004)e1, Practice for Handling, Transporting, Shipping, Storage, Receiving, and Application of Thermal Insulation Materials for Use in Contact with Austenitic Stainless Steel
C18 on Dimension Stone
EDITORIAL CHANGE
Volume 04.07
C 120-05e1, Test Methods of Flexure Testing of Slate Breaking Load, Modulus of Rupture, Modulus of Elasticity
C24 on Building Seals and Sealants
REVISION OF STANDARD
Volume 04.07
C 510-05a, Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants
C 834-05, Specification for Latex Sealants
C 836-05, Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course
C 864-05, Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers
C 920-05, Specification for Elastomeric Joint Sealants
C 957-05, Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with Integral Wearing Surface
C 1193-05a, Guide for Use of Joint Sealants
C 1305-05, Test Method for Crack Bridging Ability of Liquid-Applied Waterproofing Membrane
C 1306-05, Test Method for Hydrostatic Pressure Resistance of a Liquid-Applied Waterproofing Membrane
C 1472-05, Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width
|
