All standards actions listed below have been approved by ballot and the Committee on Standards.

The new, revised, reapproved with editorial change, and other standards that include editorial changes are now available for sale or will be available within four weeks.

Standards are published in the Annual Book of ASTM Standards (the volume and year are listed with all actions). Each standard is also available as a separate reprint. ASTM standards under five pages cost $25 (members deduct 10%) for North American customers. Lengthier standards are priced higher. Contact ASTM with a purchase order, letter, phone call (610/832-9585); fax (610/832-9555); or e-mail (service@astm.org).

For immediate access, visit www.astm.org and choose from the following options:

Subscribe to online downloads via ASTM Standards Source™ and choose a subscription of 50, 200, or unlimited standards. For details, visit demo.astm.org.

Download standards via WebDoxx and view and print them locally or request a fax copy using WebFaxx. Locate your standards within the Store area of the Web site at the
Search for Individual Standards link.
Standardization News Search

August 2000 Approved Standards Actions
A Committees B Committees C Committees D Committees
E Committees F Committees G Committees
A01 on Steel, Stainless Steel and Related Alloys

REVISION OF STANDARD
Volume 01.01, 2001
A 139-00, Specification for Electric-Fusion (Arc) -Welded Steel Pipe (Nps 4 and Over)
A 320/A 320M-00, Specification for Alloy/Steel Bolting Materials for Low-Temperature Service
A 437/A 437M-00, Specification for Alloy-Steel Turbine-Type Bolting Material Specially Heat Treated for High-Temperature Service
A 453/A 453M-00, Specification for High-Temperature Bolting Materials, with Expansion Coefficients Comparable to Austenitic Stainless Steels
A 513-00, Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing
A 540/A 540M-00, Specification for Alloy-Steel Bolting Materials for Special Applications
A 688/A 688M-00, Specification for Welded Austenitic Stainless Steel Feedwater Heater Tubes
A 790/A 790M-00, Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
A 941-00, Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
A 962/A 962M-00, Specification for Common Requirements for Steel Fasteners or Fastener Materials, or Both, Intended for Use at Any Temperature from Cryogenic to the Creep Range
A 972/A 972M-00, Specification for Fusion Bonded Epoxy-Coated Pipe Piles
A 984/A 984M-00, Specification for Steel Line Pipe, Black, Plain-End, Electric-Resistance-Welded
Volume 01.03, 2001
A 240/A 240M-00, Specification for Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels
A 679/A 679M-00, Specification for Steel Wire, High Tensile Strength, Cold Drawn
Volume 01.04, 2001
A 6/A 6M-99b, Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
A 36/A 36M-00, Specification for Carbon Structural Steel
A 242/A 242M-00, Specification for High-Strength Low-Alloy Structural Steel
A 283/A 283M-00, Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
A 328/A 328M-00, Specification for Steel Sheet Piling
A 514/A 514M-00, Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding
A 572/A 572M-00, Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
A 573/A 573M-00, Specification for Structural Carbon Steel Plates of Improved Toughness
A 588/A 588M-00, Specification for High-Strength Low-Alloy Structural Steel with 50 ksi [345 MPa] Minimum Yield Point to 4 in. [100 mm] Thick
A 633/A 633M-00, Specification for Normalized High-Strength Low-Alloy Structural Steel Plates
A 656/A 656M-00, Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability
A 678/A 678M-00, Specification for Quenched-and-Tempered Carbon and High-Strength Low-Alloy Structural Steel Plates
A 690/A 690M-00, Specification for High-Strength Low-Alloy Steel H-Piles and Sheet Piling for Use In Marine Environments
A 709/A 709M-00, Specification for Carbon and High-Strength Low-Alloy Structural Steel Shapes, Plates, and Bars and Quenched-and-Tempered Alloy Structural Steel Plates for Bridges
A 738/A 738M-00, Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
A 786/A 786M-00, Specification for Rolled Steel Floor Plates
A 808/A 808M-00, Specification for High-Strength, Low-Alloy Carbon, Manganese, Columbium, Vanadium Steel of Structural Quality with Improved Notch Toughness
A 852/A 852M-00, Specification for Quenched and Tempered Low-Alloy Structural Steel Plate with 70 ksi 485 [MPa] Minimum Yield Strength to 4 in. [100 mm] Thick
A 857/A 857M-00, Specification for Steel Sheet Piling, Cold Formed, Light Gage
A 871/A 871M-00, Specification for High-Strength Low-Alloy Structural Steel Plate with Atmospheric Corrosion Resistance
A 913/A 913M-00, Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced By Quenching and Self-Tempering Process (QST)

A05 on Metallic-Coated Iron and Steel Products

REAPPROVAL OF STANDARD WITH EDITORIAL CHANGE
Volume 01.06, 2000
A 123/A 123M-97a(1999)e1

Copyright 2000, ASTM

Back to Top