|
E05 on Fire Standards
NEW STANDARD
Volume 04.07, 2005
E 2404-05, Practice for Specimen Preparation and Mounting of Paper or Vinyl Wall Coverings to Assess Surface Burning Characteristics
REVISION OF STANDARD
Volume 04.07, 2005
E 648-04, Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source
E 1355-05, Guide for Evaluating the Predictive Capability of Deterministic Fire Models
E06 on Performance of Buildings
NEW STANDARD
Volume 04.12, 2004
E 2266-04, Guide for Design and Construction of Low-Rise Frame Building Wall Systems to Resist Water Intrusion
E 2323-04, Test Method for Calculating the Concentration of Fill Gas in a Sealed Insulating Glass Unit Using Measurements from an Oxygen Analyzer
E07 on Nondestructive Testing
REVISION OF STANDARD
Volume 03.03, 2005
E 428-05, Practice for Fabrication and Control of Steel Reference Blocks Used in Ultrasonic Examination
E 1079-05, Practice for Calibration of Transmission Densitometers
E 1208-05, Test Method for Fluorescent Liquid Penetrant Examination Using the Lipophilic Post-Emulsification Process
E 1209-05, Test Method for Fluorescent Liquid Penetrant Examination Using the Water-Washable Process
E 1210-05, Test Method for Fluorescent Liquid Penetrant Examination Using the Hydrophilic Post-Emulsification Process
E 1219-05, Test Method for Fluorescent Liquid Penetrant Examination Using the Solvent-Removable Process
E 1220-05, Test Method for Visible Penetrant Examination Using Solvent-Removable Process
E 1320-05, Reference Radiographs for Titanium Castings
E 1418-05, Test Method for Visible Penetrant Examination Using the Water-Washable Process
E 2096-05, Practice for in Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing
REAPPROVAL OF STANDARD WITH EDITORIAL CHANGE
Volume 03.03, 2005
E 155-00 (2005)e1
REAPPROVAL OF STANDARD
Volume 03.03, 2005
E 587-00 (2005)
E 664-93 (2005)
E 802-95 (2005)
E 1324-00 (2005)
E08 on Fatigue and Fracture
REVISION OF STANDARD
Volume 03.01, 2005
E 1921-05, Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range
E10 on Nuclear Technology and Applications
NEW STANDARD
Volume 12.02, 2005
E 2420-05, Guide for Post-Deactivation Surveillance and Maintenance of Radiologically Contaminated Facilities
E 2421-05, Guide for Preparing Waste Management Plans for Decommissioning Nuclear Facilities
REVISION OF STANDARD
Volume 12.02, 2005
E 170-05, Terminology Relating to Radiation Measurements and Dosimetry
EDITORIAL CHANGE
Volume 12.02, 2005
E 722-04e1, Practice for Characterizing Neutron Energy Fluence Spectra in Terms of an Equivalent Monoenergetic Neutron Fluence for Radiation-hardness Testing of Electronics
REAPPROVAL OF STANDARD
Volume 12.02, 2005
E 1250-88 (2005)
E12 on Color and Appearance
NEW STANDARD
Volume 06.01, 2006
E 2366-05, Test Method for Measurement of Daytime Chromaticity of Pavement Marking Materials Using a Portable Reflection Colorimeter
E 2367-05, Test Method for Measurement of Nighttime Chromaticity of Pavement Marking Materials Using a Portable Retroreflection Colorimeter
E 2387-05, Practice for Goniometric Optical Scatter Measurements
REVISION OF STANDARD
Volume 06.01, 2006
E 2072-04, Specification for Photoluminescent (Phosphorescent) Safety Markings
Volume 06.01, 2006
E 1682-05, Guide for Modeling the Colorimetric Properties of a Visual Display Unit
E 1710-05, Test Method for Measurement of Retroreflective Pavement Marking Materials with CEN-Prescribed Geometry Using a Portable Retroreflectometer
E 2030-04, Guide for Recommended Uses of Photoluminescent (Phosphorescent) Safety Markings
E13 on Molecular Spectroscopy and Chromatography
NEW STANDARD
Volume 03.06, 2004
E 2412-04, Practice for Condition Monitoring of Used Lubricants by Trend Analysis Using Fourier Transform Infrared FT-IR Spectrometry
REVISION OF STANDARD
Volume 03.06, 2005
E 388-04 (Includes change to title), Test Method for Wavelength Accuracy of Spectral Bandwidth of Fluorescence Spectrometers
REAPPROVAL OF STANDARD
Volume 03.06, 2004
E 386-90 (2004)
E 1614-94 (2004)
E 1653-94 (2004)
E 1654-94 (2004)
E17 on Vehicle - Pavement Systems
NEW STANDARD
Volume 04.03, 2004
E 2415-05, Practice for Installing Piezoelectric Highway Traffic Sensors
Volume 04.03, 2005
E 2341/E 2341M-05, Test Method for Determining the Stopping Distance Number by Initial Speed and Stopping Distance at Traffic Incident Sites
E21 on Space Simulation and Applications of Space Technology
EDITORIAL CHANGE
Volume 15.03, 2005
E 595-93e2, Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment
E28 on Mechanical Testing
REVISION OF STANDARD
Volume 03.01, 2004
E 74-04, Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines
E33 on Environmental Acoustics
EDITORIAL CHANGE
Volume 04.06, 2004
E 756-04e1, Test Method for Measuring Vibration-Damping Properties of Materials
E 2235-04e1, Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods
E36 on Conformity Assessment
REVISION OF STANDARD
Volume 04.02, 2005
E 329-05, Specification for Agencies Engaged in the Testing and/or Inspection of Materials Used in Construction
E37 on Thermal Measurements
REVISION OF STANDARD
Volume 14.02, 2004
E 1142-04, Terminology Relating to Thermophysical Properties
E47 on Biological Effects and Environmental Fate
NEW STANDARD
Volume 11.05, 2004
E 2385-04, Guide for Estimating Wildlife Exposure Using Measures of Habitat Quality
E50 on Environmental Assessment, Risk Management and Corrective Action
REAPPROVAL OF STANDARD WITH EDITORIAL CHANGE
Volume 11.04, 2005
E 2081-00 (2004)e1
E52 on Forensic Psychophysiology
REVISION OF STANDARD
Volume 14.02, 2004
E 1954-05, Practice for Conduct of Research in Psychophysiological Detection of Deception (Polygraph)
E 2035-05, Terminology Relating to Forensic Psychophysiology
|
