|
Books & Journals / Journal of ASTM International (JAI) / Table of Contents/
2008
Volume 5, Issue 8
(September 2008)
|
THE ONLINE VERSION IS COMPLETED, for citation purposes,
the official publication of this journal is the online version.
|
View License Agreement
|
|
|
|
|
Impact of Residual Stress and Elastic Follow-Up on Fracture
Aird CJ, Hadidi-Moud S, Truman CE, Smith DJ
Page Count: 14
Published Online: 20 August 2008
Abstract
Download PDF
Paper ID: JAI101608
DOI: 10.1520/JAI101608
Evaluation of Residual Stress Corrections to Fracture Toughness Values
Hill MR, VanDalen JE
Page Count: 11
Published Online: 20 August 2008
Abstract
Download PDF
Paper ID: JAI101713
DOI: 10.1520/JAI101713
Influence of Structure Changes in E110 Alloy Claddings on Ductility Loss Under LOCA Conditions
Nikulin SA, Rozhnov AB, Belov VA, Lyaschenko NV, Nikulina AV, Mal‘gin AG
Page Count: 16
Published Online: 17 September 2008
Abstract
Download PDF
Paper ID: JAI101148
DOI: 10.1520/JAI101148
Influence of Residual Stresses on Fretting Fatigue Life Prediction in Ti-6Al-4V
Golden PJ, Buchanan D, Naboulsi S
Page Count: 12
Published Online: 06 August 2008
Abstract
Download PDF
Paper ID: JAI101610
DOI: 10.1520/JAI101610
Elastic-Plastic Finite-Element Analyses of Compression Precracking and Its Influence on Subsequent Fatigue-Crack Growth
Yamada Y, Newman JC III, Newman JC Jr.
Page Count: 13
Published Online: 06 August 2008
Abstract
Download PDF
Paper ID: JAI101617
DOI: 10.1520/JAI101617
Effect of Prestrain on Fatigue Crack Growth of Age-Hardened Al 6061-T6
Ikematsu K, Mishima T, Kang M, Aono Y, Noguchi H
Page Count: 10
Published Online: 13 August 2008
Abstract
Download PDF
Paper ID: JAI101549
DOI: 10.1520/JAI101549
Effects of Surface Morphology and Distributed Inclusions on the Low Cycle Fatigue Behavior of Miniaturized Specimens of F82H steel
Kim SW, Tanigawa H, Hirose T, Kohyama A
Page Count: 8
Published Online: 22 October 2008
Abstract
Download PDF
Paper ID: JAI101104
DOI: 10.1520/JAI101104
|
|
|
|
|
Use of the Accelerated Mortar Bar Test to Evaluate the Effectiveness of LiNO3 Against Alkali-Silica Reaction—Part 2: Comparison with Results from the Concrete Prism Test
Tremblay C, Bérubé MA, Fournier B, Thomas MD, Folliard KJ, Nkinamubanzi PC
Page Count: 21
Published Online: 17 September 2008
Abstract
Download PDF
Paper ID: JAI101352
DOI: 10.1520/JAI101352
Optimization of the Heat Treatment of a 17-4 PH Stainless Steel by Dilatometric Technique
Gerosa R, Rivolta B, Sala A
Page Count: 8
Published Online: 03 October 2008
Abstract
Download PDF
Paper ID: JAI101779
DOI: 10.1520/JAI101779
Accelerated Cooling of Steel Plates: The Time Has Come
Gorni AA, Dolabela da Silveira JH
Page Count: 7
Published Online: 20 August 2008
Abstract
Download PDF
Paper ID: JAI101777
DOI: 10.1520/JAI101777
Cooling Characteristic Test of Quenching Media
Zeng G
Page Count: 10
Published Online: 20 August 2008
Abstract
Download PDF
Paper ID: JAI101827
DOI: 10.1520/JAI101827
Use of the Accelerated Mortar Bar Test to Evaluate the Effectiveness of LiNO3 Against Alkali-Silica Reaction—Part 1: Pore Solution Chemistry and Influence of Various Parameters
Tremblay C, Bérubé MA, Fournier B, Thomas MD, Folliard KJ, Nkinamubanzi PC
Page Count: 17
Published Online: 17 September 2008
Abstract
Download PDF
Paper ID: JAI101347
DOI: 10.1520/JAI101347
Comparison of Thermal Expansion Behavior of Phosphoric Irons with Conventional Concrete Reinforcement Steel
Sahoo G, Balasubramaniam R, Mungole MN
Page Count: 7
Published Online: 13 August 2008
Abstract
Download PDF
Paper ID: JAI101708
DOI: 10.1520/JAI101708
|
|