LoginSite MapOnline SupportContactPrivacy PolicyIP Policy
Site Search
 
View Shopping Cart

Books & Journals / Journal of ASTM International (JAI) / Table of Contents/

2005
Volume 2, Issue 1 (January 2005)

THE ONLINE VERSION IS COMPLETED, for citation purposes,
the official publication of this journal is the online version.

View License Agreement

Technical Categories

> Materials Performance and Characterization
> Civil Engineering and Building Materials
> Petroleum and Chemical Engineering
> Nuclear Science and Technology
> Environmental Science and Technology
> Medical, Health, and Safety
> General Technology

Materials Performance and Characterization

Effect of Heat Treatment on the Mechanical Properties of ASTM A 890 Gr6A Super Duplex Stainless Steel
Martins M, Casteletti LC
Page Count: 14
Published Online: 03 January 2005
Abstract
Download PDF
Paper ID: JAI13037
DOI: 10.1520/JAI13037

Evaluation of the Effect of Crack Tip Constraint on Fatigue Crack Growth Rate in Inconel 718
Joyce JA
Page Count: 18
Published Online: 03 January 2005
Abstract
Download PDF
Paper ID: JAI11991
DOI: 10.1520/JAI11991

Effect of Periodic Overloads on Threshold Fatigue Crack Growth in Al-Alloys
Sunder R
Page Count: 16
Published Online: 03 January 2005
Abstract
Download PDF
Paper ID: JAI12004
DOI: 10.1520/JAI12004

Evaluation of the Effect of Biaxial Loading on the To Reference Temperature Using a Cruciform Specimen Geometry
Joyce JA, Link RE, Gaies J
Page Count: 18
Published Online: 03 January 2005
Abstract
Download PDF
Paper ID: JAI12022
DOI: 10.1520/JAI12022

Fatigue Crack Growth Rate and Stress-Intensity Factor Corrections for Out-of-Plane Crack Growth
Forth SC, Herman DJ, James MA, Johnston WM
Page Count: 14
Published Online: 03 January 2005
Abstract
Download PDF
Paper ID: JAI12026
DOI: 10.1520/JAI12026

Sensitivity of Creep Crack Initiation and Growth in Plates to Material Properties Variations
Wasmer K, Nikbin K, Webster GA
Page Count: 15
Published Online: 03 January 2005
Abstract
Download PDF
Paper ID: JAI12030
DOI: 10.1520/JAI12030

Microstructural Influences on the Development and Growth of Small Fatigue Cracks in the Near Threshold Regime
Schneider JA, Kenik EA
Page Count: 11
Published Online: 03 January 2005
Abstract
Download PDF
Paper ID: JAI12050
DOI: 10.1520/JAI12050

Civil Engineering and Building Materials

The Role of Friction in Post-Crack Energy Absorption of Fiber Reinforced Concrete in the Round Panel Test
Bernard ES
Page Count: 12
Published Online: 03 January 2005
Abstract
Download PDF
Paper ID: JAI11771
DOI: 10.1520/JAI11771

A New Test Method for Porosity Measurements of Portland Cement Pervious Concrete
Montes F, Valavala S, Haselbach LM
Page Count: 13
Published Online: 03 January 2005
Abstract
Download PDF
Paper ID: JAI12931
DOI: 10.1520/JAI12931

Density Compensation of TDR Calibration for Geotechnical Applications
Yu X, Drnevich VP
Page Count: 16
Published Online: 03 January 2005
Abstract
Download PDF
Paper ID: JAI12190
DOI: 10.1520/JAI12190

ASTM C 88 Test on Soundness of Aggregate Using Sodium Sulfate or Magnesium Sulfate: A Study of the Mechanisms of Damage
Haynes H
Page Count: 17
Published Online: 03 January 2005
Abstract
Download PDF
Paper ID: JAI12517
DOI: 10.1520/JAI12517

Estimating Unsaturated Hydraulic Conductivity of Fine-Grained Soils Using Electrical Resistivity Measurements
Sreedeep S, Singh DN
Page Count: 11
Published Online: 03 January 2005
Abstract
Download PDF
Paper ID: JAI12823
DOI: 10.1520/JAI12823

Flexible Crumb Tire Rubber-Filled Cement Mortars as a Protective System for Buried Infrastructure
Nehdi M, Khan A, Sumner J
Page Count: 15
Published Online: 03 January 2005
Abstract
Download PDF
Paper ID: JAI10933
DOI: 10.1520/JAI10933

Nuclear Science and Technology

The Correlation Between Microstructures and in-BWR Corrosion Behavior of Highly Irradiated Zr-based Alloys
Takagawa Y, Ishimoto S, Etoh Y, Kubo T, Ogata K, Kubota O
Page Count: 16
Published Online: 03 January 2005
Abstract
Download PDF
Paper ID: JAI12357
DOI: 10.1520/JAI12357

Plutonium-238 Alpha-Decay Damage Study of A Glass-Bonded Sodalite Ceramic Waste Form
Frank SM, DiSanto T, Goff M, Johnson SG, Jue JF, Barber TL, Noy M, O'Holleran TP, Giglio JJ
Page Count: 11
Published Online: 03 January 2005
Abstract
Download PDF
Paper ID: JAI12421
DOI: 10.1520/JAI12421

Environmental Science and Technology

Development of a Cooling Capability Test Method for Liquid-Cooled Textile System
Cao H, Branson DH, Nam J, Peksoz S, Farr CA
Page Count: 10
Published Online: 03 January 2005
Abstract
Download PDF
Paper ID: JAI12100
DOI: 10.1520/JAI12100

Effects of Thermal Properties on Skin Burn Predictions in Longer Duration Protective Clothing Tests
Torvi DA
Page Count: 13
Published Online: 03 January 2005
Abstract
Download PDF
Paper ID: JAI12115
DOI: 10.1520/JAI12115

Medical, Health, and Safety

Contrast Enhancing Filters in Ski Sports
Lingelbach B, Jendrusch G
Page Count: 8
Published Online: 03 January 2005
Abstract
Download PDF
Paper ID: JAI11972
DOI: 10.1520/JAI11972

General Technology

Simplified Thermal Analysis of Asynchronous Machine
Okoro OI
Page Count: 20
Published Online: 03 January 2005
Abstract
Download PDF
Paper ID: JAI12154
DOI: 10.1520/JAI12154

The Role of TGA-DTA in the Initial Evaluation of the Solid State Forms for Pharmaceutical New Chemical Entities, Part 2: Evaluation of Mixed Forms
Redman-Furey NL, Dicks ML, Godlweski J, Vaughn DC, Collins WJ
Page Count: 9
Published Online: 03 January 2005
Abstract
Download PDF
Paper ID: JAI12792
DOI: 10.1520/JAI12792

The Role of TGA-DTA in the Initial Evaluation of the Solid State Forms for Pharmaceutical New Chemical Entities, Part 1: Evaluation of Pure Forms
Redman-Furey NL, Dicks ML, Godlweski J, Vaughn DC, Collins WJ
Page Count: 10
Published Online: 03 January 2005
Abstract
Download PDF
Paper ID: JAI12791
DOI: 10.1520/JAI12791