|
The Last Issue of CCA (and thoughts on Future Standards Issues)
Hooton RD
Page Count: 2
Abstract
Download PDF
Paper ID: CCA13109
DOI: 10.1520/CCA13109
A Device for Studying Fresh Concrete Friction
Vanhove Y, Djelal C, Magnin A
Page Count: 7
Abstract
Download PDF
Paper ID: CCA11897
DOI: 10.1520/CCA11897
Effect of Non-Uniform Straining in Concrete Compressive Strength Tests
Luker I, Tabsh SW
Page Count: 10
Abstract
Download PDF
Paper ID: CCA12063
DOI: 10.1520/CCA12063
A New Method for Evaluating the Risk of DEF
TAgnit-Hamou A, Petrov N
Page Count: 6
Abstract
Download PDF
Paper ID: CCA11864
DOI: 10.1520/CCA11864
Influence of Specimen Geometry, Orientation of Casting Plane, and Mode of Concrete Consolidation on Expansion Due to ASR
Smaoui N, Berube MA, Fournier B, Bissonnette B
Page Count: 13
Abstract
Download PDF
Paper ID: CCA11927
DOI: 10.1520/CCA11927
Measurement of Particle Size Distribution in Portland Cement Powder: Analysis of ASTM Round-Robin Studies
Ferraris CF, Hackley VA, Aviles AI
Page Count: 11
Abstract
Download PDF
Paper ID: CCA11920
DOI: 10.1520/CCA11920
Introduction to the Symposium on Cement-Admixture Interactions
Struble LJ, Hooton RD, Roberts L
Page Count: 1
Abstract
Download PDF
Paper ID: CCA13111
DOI: 10.1520/CCA13111
Unthermostated Multichannel Heat Conduction Calorimeter
Lars Wadso
Page Count: 7
Abstract
Download PDF
Paper ID: CCA12313
DOI: 10.1520/CCA12313
Influence of a Long-Term Retarder on the Hydration of Clinker and Cement
Rickert J, Thielen G
Page Count: 10
Abstract
Download PDF
Paper ID: CCA12315
DOI: 10.1520/CCA12315
Cement and Superplasticizer Combinations: Compatibility and Robustness
Nkinamubanzi PC, Aitcin PC
Page Count: 8
Abstract
Download PDF
Paper ID: CCA12329
DOI: 10.1520/CCA12329
Polycarboxylate Polymers and Blends in Different Cements
Mader U, Schober I, Wombacher F, Ludirdja D
Page Count: 5
Abstract
Download PDF
Paper ID: CCA12314
DOI: 10.1520/CCA12314
Modeling Drying Shrinkage Stress Gradients in Concrete
Grasley ZC, Lange DA
Page Count: 8
Abstract
Download PDF
Paper ID: CCA12302
DOI: 10.1520/CCA12302
Potential for Restrained Shrinkage Cracking of Concrete and Mortar
See HT, Attiogbe EK, Miltenberger MA
Page Count: 8
Abstract
Download PDF
Paper ID: CCA12305
DOI: 10.1520/CCA12305
Pre-Soaked Lightweight Aggregates as Additives for Internal Curing of High-Strength Concretes
Kovler K, Souslikov A, Bentur A
Page Count: 8
Abstract
Download PDF
Paper ID: CCA12295
DOI: 10.1520/CCA12295
New Results on Early-Age Cracking Risk of Special Concrete
Schiessl P, Beckhaus K, Schachinger I
Page Count: 9
Abstract
Download PDF
Paper ID: CCA12304
DOI: 10.1520/CCA12304
Control of Cracking in Bridge Decks: Observations from the Field
Darwin D, Browning J, Lindquist WD
Page Count: 7
Abstract
Download PDF
Paper ID: CCA12320
DOI: 10.1520/CCA12320
Effect of Finishing Practices on Performance of Concrete Containing Slag and Fly Ash as Measured by ASTM C 672 Resistance to Deicer Scaling Tests
Taylor PC, Morrison W, Jennings VA
Page Count: 5
Abstract
Download PDF
Paper ID: CCA11923
DOI: 10.1520/CCA11923
Resistance to Freezing and Thawing Cycles and Scaling Resistance of Very High Early Strength Concrete
Kurtz MA, Constantiner D
Page Count: 5
Abstract
Download PDF
Paper ID: CCA12074
DOI: 10.1520/CCA12074
Discussion of 'Role of Fly Ash and Aluminum Addition on Ettringite Formation In Line - Remediated Mine Tailings' by A. M. O. Mohamed, Mr. Hassein, and F. P. Hassani*
Hime WG
Page Count: 1
Abstract
Download PDF
Paper ID: CCA12479
DOI: 10.1520/CCA12479
Role of Fly Ash and Aluminum Addition on Ettringite Formation in Lime - Remediated Mine Tailings
Mohamed AM, Hossein M, Hassani FP
Page Count: 2
Abstract
Download PDF
Paper ID: CCA12512
DOI: 10.1520/CCA12512
|
