AIIMASTM-BP-01-08 - Portable Document Format-Healthcare (PDF) A Best Practices Guide
ANS/ISO17025-05 - General Requirements for the Competence of Testing and Calibration Laboratories
ANSI/ISO/IEC17024-03 - Conformity assessment—General requirements for bodies operating certification of persons
ANSI/ISO/IEC17011-05 - Conformity assessmen—General requirements for accreditation bodies accrediting conformity assessment bodies
D2512-95(2008) - Standard Test Method for Compatibility of Materials with Liquid Oxygen (Impact Sensitivity Threshold and Pass-Fail Techniques)
E1-07 - Standard Specification for ASTM Liquid-in-Glass Thermometers
E1-RUS-07 - Стандартная спецификация на стеклянные жидкостные термометры ASTM
E11-09e1 - Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves
E11-RUS-09e1 - Стандартная на проволочную ситоткань и сита для испытательных целей
E29-08 - Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E29-RUS-08 - Стандартная методика использования значащих цифр в данных по испытаниям для определения соответствия техническим условиям
E41-92(2010) - Terminology Relating to Conditioning
E77-07 - Standard Test Method for Inspection and Verification of Thermometers
E77-RUS-07 - Стандартный метод контроля и поверки термометров
E95-68(2011) - Standard Specification for Cell-Type Oven with Controlled Rates of Ventilation
E100-10 - Standard Specification for ASTM Hydrometers
E105-10 - Standard Practice for Probability Sampling Of Materials
E122-09e1 - Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process
E123-02(2007) - Standard Specification for Apparatus for Determination of Water by Distillation
E124-94(2010) - Standard Specification for Weighing and Drying Apparatus for Microchemical Analysis
E126-05a - Standard Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers
E128-99(2011) - Standard Test Method for Maximum Pore Diameter and Permeability of Rigid Porous Filters for Laboratory Use
E133-92(2010) - Standard Specification for Distillation Equipment
E141-10 - Standard Practice for Acceptance of Evidence Based on the Results of Probability Sampling
E144-94(2011) - Standard Practice for Safe Use of Oxygen Combustion Bombs
E145-94(2011) - Standard Specification for Gravity-Convection and Forced-Ventilation Ovens
E147-61(2011) - Standard Specification for Apparatus for Microdetermination of Nitrogen by Kjeldahl Method
E161-00(2010) - Standard Specification for Precision Electroformed Sieves
E177-10 - Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
E178-08 - Standard Practice for Dealing With Outlying Observations
E191-64(2011) - Standard Specification for Apparatus For Microdetermination of Carbon and Hydrogen in Organic and Organo-Metallic Compounds
E193-94(2010) - Standard Specification for Laboratory Glass Micropipets
E205-96(2010) - Standard Specification for Glass and Oxygen Combustion Flask
E207-08 - Standard Test Method for Thermal EMF Test of Single Thermoelement Materials by Comparison with a Reference Thermoelement of Similar EMF-Temperature Properties
E210-63(2010) - Standard Specification for Microscope Objective Thread
E211-82(2010) - Standard Specification for Cover Glasses and Glass Slides for Use in Microscopy
E220-07a - Standard Test Method for Calibration of Thermocouples By Comparison Techniques
E228-11 - Standard Test Method for Linear Thermal Expansion of Solid Materials With a Push-Rod Dilatometer
E230/E230M-11e1 - Standard Specification and Temperature-Electromotive Force (emf) Tables for Standardized Thermocouples
E235-06 - Standard Specification for Thermocouples, Sheathed, Type K and Type N, for Nuclear or for Other High-Reliability Applications
E236-66(2011) - Standard Specification for Apparatus for Microdetermination of Alkoxyl Groups
E237-02(2007) - Standard Specification for Laboratory Glass Microvolumetric Vessels (Volumetric Flasks and Centrifuge Tubes)
E287-02(2007) - Standard Specification for Laboratory Glass Graduated Burets
E288-10 - Standard Specification for Laboratory Glass Volumetric Flasks
E289-04(2010) - Standard Test Method for Linear Thermal Expansion of Rigid Solids with Interferometry
E319-85(2008) - Standard Practice for the Evaluation of Single-Pan Mechanical Balances
E323-11 - Standard Specification for Perforated-Plate Sieves for Testing Purposes
E329-11c - Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection
E344-10 - Terminology Relating to Thermometry and Hydrometry
E438-92(2011) - Standard Specification for Glasses in Laboratory Apparatus
E444-09 - Standard Guide for Scope of Work of Forensic Document Examiners
E452-02(2007) - Standard Test Method for Calibration of Refractory Metal Thermocouples Using a Radiation Thermometer
E454-11 - Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series)
E456-08e3 - Standard Terminology Relating to Quality and Statistics
E473-11a - Standard Terminology Relating to Thermal Analysis and Rheology
E487-09 - Standard Test Method for Constant-Temperature Stability Of Chemical Materials
E502-07e1 - Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods
E537-07 - Standard Test Method for The Thermal Stability Of Chemicals By Differential Scanning Calorimetry
E541-10 - Standard Specification for Agencies Engaged in System Analysis and Compliance Assurance for Manufactured Building
E542-01(2007) - Standard Practice for Calibration of Laboratory Volumetric Apparatus
E563-11 - Standard Practice for Preparation and Use of an Ice-Point Bath as a Reference Temperature
E574-06 - Standard Specification for Duplex, Base Metal Thermocouple Wire With Glass Fiber or Silica Fiber Insulation
E582-07 - Standard Test Method for Minimum Ignition Energy and Quenching Distance in Gaseous Mixtures
E585/E585M-09 - Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Base Metal Thermocouple Cable
E601-07a - Standard Test Method for Measuring Electromotive Force (emf) Stability of Base-Metal Thermoelement Materials with Time in Air
E608/E608M-06 - Standard Specification for Mineral-Insulated, Metal-Sheathed Base Metal Thermocouples
E617-97(2008) - Standard Specification for Laboratory Weights And Precision Mass Standards
E620-11 - Standard Practice foReporting Opinions of Scientific or Technical Experts
E633-00(2005) - Standard Guide for Use of Thermocouples in Creep and Stress-Rupture Testing to 1800°F (1000°C) in Air
E644-11 - Standard Test Methods for Testing Industrial Resistance Thermometers
E651/E651M-01(2008) - Standard Practice for Evaluating Capabilities of Agencies Involved in System Analysis and Compliance Assurance for Manufactured Building
E659-78(2005) - Standard Test Method for Autoignition Temperature of Liquid Chemicals
E659-RUS-78(2005) - Стандартный метод определения температуры самовозгорания жидких химических веществ
E671-98(2010) - Standard Specification for Maximum Permissible Thermal Residual Stress in Annealed Glass Laboratory Apparatus
E672-87(2011) - Standard Specification for Disposable Glass Micropipets
E674-11 - Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series)
E675-02(2007) - Standard Specification for Interchangeable Taper-Ground Stopcocks And Stoppers
E676-02(2007) - Standard Specification for Interchangeable Taper-Ground Joints
E677-94(2010) - Standard Specification for Interchangeable Spherical Ground Joints
E678-07 - Standard Practice for Evaluation of Scientific or Technical Data
E680-79(2011)e1 - Standard Test Method for Drop Weight Impact Sensitivity of Solid-Phase Hazardous Materials
E681-09 - Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases)
E691-11 - Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
E694-99(2010) - Standard Specification for Laboratory Glass Volumetric Apparatus
E696-07 - Standard Specification for Tungsten-Rhenium Alloy Thermocouple Wire
E698-11 - Standard Test Method for Arrhenius Kinetic Constants for Thermally Unstable Materials Using Differential Scanning Calorimetry and the Flynn/Wall/Ozawa Method
E699-09 - Standard Practice for Evaluation of Agencies Involved in Testing, Quality Assurance, and Evaluating of Building Components
E714-94(2009) - Standard Specification for Disposable Glass Serological Pipets
E715-80(2011) - Standard Specification for Gravity-Convection and Forced-Circulation Water Baths
E732-80(2011) - Standard Specification for Disposable Pasteur-Type Pipet
E734-80(2010) - Standard Specification for Disposable Glass Blood Sample Capillary Tube (Microhematocrit)
E780-06(2011) - Standard Test Method for Measuring the Insulation Resistance of Mineral-Insulated, Metal-Sheathed Thermocouples and Thermocouple Cable at Room Temperature
E784-89(2011) - Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp
E785-81(2011) - Standard Specification for Crucibles, Ignition, Laboratory, Metal
E786-81(2011) - Standard Specification for Dishes, Evaporating, Platinum
E787-81(2011) - Standard Specification for Disposable Glass Micro Blood Collection Pipets
E788-97(2008) - Standard Specification for Pipet, Blood Diluting
E793-06 - Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
E793-RUS-06 - Стандартный метод определения энтальпии плавления и кристаллизации с помощью дифференциальной сканирующей калориметрии
E794-06 - Standard Test Method for Melting And Crystallization Temperatures By Thermal Analysis
E794-RUS-06 - Стандартный метод определения температур плавления и кристаллизации с помощью термического анализа
E799-03(2009) - Standard Practice for Determining Data Criteria and Processing for Liquid Drop Size Analysis
E816-05(2010) - Standard Test Method for Calibration of Pyrheliometers by Comparison to Reference Pyrheliometers
E824-10 - Standard Test Method for Transfer of Calibration From Reference to Field Radiometers
E831-06 - Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
E832-81(2008) - Standard Specification for Laboratory Filter Papers
E839-11 - Standard Test Methods for Sheathed Thermocouples and Sheathed Thermocouple Cable
E860-07 - Standard Practice for Examining And Preparing Items That Are Or May Become Involved In Criminal or Civil Litigation
E879-01(2007) - Standard Specification for Thermistor Sensors for Clinical Laboratory Temperature Measurements
E890-94(2009) - Standard Specification for Disposable Glass Culture Tubes
E898-88(2005) - Standard Test Method of Testing Top-Loading, Direct-Reading Laboratory Scales and Balances
E911-98(2009) - Standard Specification for Glass Stopcocks with Polytetrafluoroethylene (PTFE) Plugs
E918-83(2011) - Standard Practice for Determining Limits of Flammability of Chemicals at Elevated Temperature and Pressure
E920-97(2008) - Standard Specification for Commercially Packaged Laboratory Apparatus
E921-97(2010) - Standard Specification for Export Packaged Laboratory Apparatus
E923-97(2008) - Standard Specification for Glass Westergren Tube, Reusable
E928-08 - Standard Test Method for Determination of Purity by Differential Scanning Calorimetry
E934-94(2009) - Standard Specification for Serological Pipet, Disposable Plastic
E960-93(2008) - Standard Specification for Laboratory Glass Beakers
E961-97(2008) - Standard Specification for Blood Sedimentation Tube, Wintrobe, Glass, Reusable
E967-08 - Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
E968-02(2008) - Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters
E969-02(2007) - Standard Specification for Glass Volumetric (Transfer) Pipets
E982-94(2009) - Standard Specification for Laboratory Glass Test Tubes
E1020-96(2006) - Standard Practice for Reporting Incidents that May Involve Criminal or Civil Litigation
E1043-00(2010) - Standard Specification for Pipets, Milk and Cream Examination
E1044-96(2011) - Standard Specification for Glass Serological Pipets (General Purpose and Kahn)
E1045-00(2010) - Standard Specification for Pipet, Sahli Hemoglobin
E1046-85(2010) - Standard Specification for Glass Westergren Tube, Disposable
E1047-85(2010) - Standard Specification for Blood Sedimentation Tube, Wintrobe, Glass, Disposable
E1048-88(2010) - Standard Specification for Color-Coding Pipets or Containers Coated With Anticoagulants
E1092-91(2010) - Standard Specification for Glass Micro Folin Pipet, Disposable
E1093-91(2005) - Standard Specification for Glass Prothrombin Pipet, Disposable
E1094-04(2009) - Standard Specification for Pharmaceutical Glass Graduates
E1095-99(2010) - Standard Specification for Common Laboratory Glass Funnels
E1096-86(2011) - Standard Specification for Laboratory Glass Separatory Funnels
E1129/E1129M-08e1 - Standard Specification for Thermocouple Connectors
E1131-08 - Standard Test Method for Compositional Analysis by Thermogravimetry
E1131-RUS-08 - Стандартный метод анализа состава вещества с помощью термогравиметрии
E1133-86(2010) - Standard Practice for Performance Testing of Packaged Laboratory Apparatus for United States Government Procurements
E1137/E1137M-08 - Standard Specification for Industrial Platinum Resistance Thermometers
E1142-11b - Standard Terminology Relating to Thermophysical Properties
E1154-89(2008) - Standard Specification for Piston or Plunger Operated Volumetric Apparatus
E1157-87(2011) - Standard Specification for Sampling and Testing of Reusable Laboratory Glassware
E1159-98(2009) - Standard Specification for Thermocouple Materials, Platinum-Rhodium Alloys, and Platinum
E1169-07 - Standard Practice for Conducting Ruggedness Tests
E1188-05 - Standard Practice for Collection and Preservation of Information and Physical Items by a Technical Investigator
E1189-00(2010) - Standard Specification for Micro-Burets (Koch Style)
E1225-09 - Standard Test Method for Thermal Conductivity of Solids by Means of the Guarded-Comparative-Longitudinal Heat Flow Technique
E1226-10 - Standard Test Method for Explosibility of Dust Clouds
E1231-10 - Standard Practice for Calculation of Hazard Potential Figures-of-Merit for Thermally Unstable Materials
E1232-07 - Standard Test Method for Temperature Limit of Flammability of Chemicals
E1239-04(2010) - Standard Practice for Description of Reservation/Registration-Admission, Discharge, Transfer (R-ADT) Systems for Electronic Health Record (EHR) Systems
E1256-11a - Standard Test Methods for Radiation Thermometers (Single Waveband Type)
E1260-03(2009) - Standard Test Method for Determining Liquid Drop Size Characteristics in a Spray Using Optical Nonimaging Light-Scattering Instruments
E1269-11 - Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
E1270-88(2008) - Standard Test Method for Equal Arm Balances
E1272-02(2007) - Standard Specification for Laboratory Glass Graduated Cylinders
E1273-88(2008) - Standard Specification for Color Coding of Reusable Laboratory Pipets
E1292-94(2011) - Standard Specification for Gravity Convection and Forced Ventilation Incubators
E1293-02(2007) - Standard Specification for Glass Measuring Pipets
E1301-95(2003) - Standard Guide for Proficiency Testing by Interlaboratory Comparisons
E1323-09 - Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data
E1325-02(2008) - Standard Terminology Relating to Design of Experiments
E1340-05(2010) - Standard Guide for Rapid Prototyping of Information Systems
E1350-07 - Standard Guide for Testing Sheathed Thermocouples, Thermocouples Assemblies, and Connecting Wires Prior to, and After Installation or Service
E1356-08 - Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry
E1363-08 - Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
E1377-99(2010) - Standard Specification for Laboratory Glass Kjeldahl Flasks
E1378-99(2010) - Standard Specification for Laboratory Glass Multiple Neck Distilling/Boiling Flasks
E1379-90(2010) - Standard Specification for Laboratory Glass Dewar Flask
E1380-90(2010) - Standard Specification for Color Coding of Laboratory Pipets with Multiple Graduations, 0.1 mL and Larger, But Excluding Disposable Prothrombin and Disposable Micropipets
E1384-07 - Standard Practice for Content and Structure of the Electronic Health Record (EHR)
E1386-10 - Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Solvent Extraction
E1388-05 - Standard Practice for Sampling of Headspace Vapors from Fire Debris Samples
E1402-08e1 - Standard Terminology Relating to Sampling
E1403-97(2008) - Standard Specification for Laboratory Glass Boiling Flasks
E1404-94(2008) - Standard Specification for Laboratory Glass Conical Flasks
E1405-98(2010) - Standard Specification for Laboratory Glass Distillation Flasks
E1406-95(2010) - Standard Specification for Laboratory Glass Filter Flasks
E1412-07 - Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Passive Headspace Concentration With Activated Charcoal
E1413-07 - Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Dynamic Headspace Concentration
E1422-05 - Standard Guide for Test Methods for Forensic Writing Ink Comparison
E1445-08 - Standard Terminology Relating to Hazard Potential of Chemicals
E1459-92(2005) - Standard Guide for Physical Evidence Labeling and Related Documentation
E1461-07 - Standard Test Method for Thermal Diffusivity by the Flash Method
E1488-09 - Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods
E1491-06 - Standard Test Method for Minimum Autoignition Temperature of Dust Clouds
E1492-11 - Standard Practice for Receiving, Documenting, Storing, and Retrieving Evidence in a Forensic Science Laboratory
E1502-10 - Standard Guide for Use of Fixed-Point Cells for Reference Temperatures
E1515-07 - Standard Test Method for Minimum Explosible Concentration of Combustible Dusts
E1522-93(2008) - Standard Specification for Autoclavable Protective Coatings on Laboratory Glassware
E1530-11 - Standard Test Method for Evaluating the Resistance to Thermal Transmission of Materials by the Guarded Heat Flow Meter Technique
E1545-11 - Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis
E1582-04 - Standard Practice for Calibration of Temperature Scale for Thermogravimetry
E1588-10e1 - Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy Dispersive X-ray Spectrometry
E1594-11 - Standard Guide for Expression of Temperature
E1610-02(2008) - Standard Guide for Forensic Paint Analysis and Comparison
E1617-09 - Standard Practice for Reporting Particle Size Characterization Data
E1618-11 - Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography-Mass Spectrometry
E1620-97(2004) - Standard Terminology Relating to Liquid Particles and Atomization
E1633-08a - Standard Specification for Coded Values Used in the Electronic Health Record
E1638-11a - Standard Terminology Relating to Sieves, Sieving Methods, and Screening Media
E1640-09 - Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
E1640-RUS-09 - Стандартный метод определения температуры стеклования с помощью динамического механического анализа
E1641-07 - Standard Test Method for Decomposition Kinetics by Thermogravimetry
E1641-RUS-07 - Стандартный метод определения кинетики разложения материалов с помощью термогравиметрии
E1652-10 - Standard Specification for Magnesium Oxide and Aluminum Oxide Powder and Crushable Insulators Used in the Manufacture of Metal-Sheathed Platinum Resistance Thermometers, Base Metal Thermocouples, and Noble Metal Thermocouples
E1658-08 - Standard Terminology for Expressing Conclusions of Forensic Document Examiners
E1684-10 - Standard Specification for Miniature Thermocouple Connectors
E1714-07 - Standard Guide for Properties of a Universal Healthcare Identifier (UHID)
E1715-01(2008) - Standard Practice for An Object-Oriented Model for Registration, Admitting, Discharge, and Transfer (RADT) Functions in Computer-Based Patient Record Systems
E1719-05 - Standard Test Method for Vapor Pressure of Liquids by Ebulliometry
E1732-11b - Standard Terminology Relating to Forensic Science
E1744-04(2010) - Standard Practice for View of Emergency Medical Care in the Electronic Health Record
E1750-10 - Standard Guide for Use of Water Triple Point Cells
E1751/E1751M-09e1 - Standard Guide for Temperature Electromotive Force (emf) Tables for Non-Letter Designated Thermocouple Combinations
E1762-95(2009) - Standard Guide for Electronic Authentication of Health Care Information
E1782-08 - Standard Test Method for Determining Vapor Pressure by Thermal Analysis
E1789-04 - Standard Guide for Writing Ink Identification
E1824-09e1 - Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis: Tension Method
E1843-96(2010) - Standard Guide for Sexual Assault Investigation, Examination, and Evidence Collection
E1858-08 - Standard Test Method for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry
E1860-07 - Standard Test Method for Elapsed Time Calibration Thermal Analyzers
E1867-06 - Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
E1868-10 - Standard Test Method for Loss-On-Drying by Thermogravimetry
E1869-04(2010) - Standard Guide for Confidentiality, Privacy, Access, and Data Security Principles for Health Information Including Electronic Health Records
E1877-11 - Standard Practice for Calculating Thermal Endurance of Materials from Thermogravimetric Decomposition Data
E1878-97(2008) - Standard Specification for Laboratory Glass Volumetric Flasks, Special Use
E1919-09 - Standard Guide for Worldwide Published Standards Relating to Particle and Spray Characterization
E1952-11 - Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
E1953-07 - Standard Practice for Description of Thermal Analysis and Rheology Apparatus
E1959-05(2011) - Standard Guide for Requests for Proposals Regarding Medical Transcription Services for Healthcare Institutions
E1967-11 - Standard Test Method for the Automated Determination of Refractive Index of Glass Samples Using the Oil Immersion Method and a Phase Contrast Microscope
E1968-11 - Standard Guide for Microcrystal Testing in the Forensic Analysis of Cocaine
E1969-11 - Standard Guide for Microcrystal Testing in the Forensic Analysis of Methamphetamine and Amphetamine
E1970-06 - Standard Practice for Statistical Treatment of Thermoanalytical Data
E1981-98(2004) - Standard Guide for Assessing the Thermal Stability of Materials by Methods of Accelerating Rate Calorimetry
E1985-98(2005) - Standard Guide for User Authentication and Authorization
E1986-09 - Standard Guide for Information Access Privileges to Health Information
E1994-09 - Standard Practice for Use of Process Oriented AOQL and LTPD Sampling Plans
E2008-08 - Standard Test Method for Volatility Rate by Thermogravimetry
E2009-08 - Standard Test Method for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry
E2012-06 - Standard Guide for the Preparation of a Binary Chemical Compatibility Chart
E2016-11 - Standard Specification for Industrial Woven Wire Cloth
E2017-99(2010) - Standard Guide for Amendments to Health Information
E2019-03(2007) - Standard Test Method for Minimum Ignition Energy of a Dust Cloud in Air
E2021-09 - Standard Test Method for Hot-Surface Ignition Temperature of Dust Layers
E2040-08 - Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
E2041-08e1 - Standard Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method
E2046-08 - Standard Test Method for Reaction Induction Time by Thermal Analysis
E2057-10 - Standard Specifications for Preparation of Laboratory Analysis Requests in Sexual Assault Investigations
E2069-06 - Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters
E2070-08 - Standard Test Method for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods
E2071-00(2010) - Standard Practice for Calculating Heat of Vaporization or Sublimation from Vapor Pressure Data
E2079-07 - Standard Test Methods for Limiting Oxygen (Oxidant) Concentration in Gases and Vapors
E2092-09 - Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
E2113-09 - Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
E2117-06(2011) - Standard Guide for Identification and Establishment of a Quality Assurance Program for Medical Transcription
E2123-10 - Standard Practice for the Transmittal of Evidence in Sexual Assault Investigation
E2124-10 - Standard Practice for the Specification for Equipment and Supplies in Sexual Assault Investigations
E2125-11 - Standard Guide for Microcrystal Testing in the Forensic Analysis of Phencyclidine and Its Analogues
E2145-07 - Standard Practice for Information Modeling
E2147-01(2009) - Standard Specification for Audit and Disclosure Logs for Use in Health Information Systems
E2154-01(2008) - Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Passive Headspace Concentration with Solid Phase Microextraction (SPME)
E2159-01(2008) - Standard Guide for Selection, Assignment, and Monitoring of Persons To Be Utilized as Assessors/Auditors or Technical Experts
E2160-04 - Standard Test Method for Heat of Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry
E2161-08 - Standard Terminology Relating to Performance Validation in Thermal Analysis
E2171-02(2008) - Standard Practice for Rating-Scale Measures Relevant to the Electronic Health Record
E2181/E2181M-11 - Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Noble Metal Thermocouples and Thermocouple Cable
E2183-02 - Standard Guide for XML DTD Design, Architecture and Implementation (Withdrawn 2011)
E2195-09 - Standard Terminology Relating to the Examination of Questioned Documents
E2206-06 - Standard Test Method for Force Calibration Of Thermomechnical Analyzers
E2210-06 - Standard Specification for Guideline Elements Model version 2 (GEM II)-Document Model for Clinical Practice Guidelines
E2211-02(2010) - Standard Specification for Relationship Between a Person (Consumer) and a Supplier of an Electronic Personal (Consumer) Health Record
E2212-02a(2010) - Standard Practice for Healthcare Certificate Policy
E2224-10 - Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
E2225-10 - Standard Guide for Forensic Examination of Fabrics and Cordage
E2227-02(2008) - Standard Guide for Forensic Examination of Non-Reactive Dyes in Textile Fibers by Thin-Layer Chromatography
E2228-10 - Standard Guide for Microscopic Examination of Textile Fibers
E2234-09 - Standard Practice for Sampling a Stream of Product by Attributes Indexedby AQL
E2251-11 - Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids
E2253-08e1 - Standard Method for Enthalpy Measurement Validation of Differential Scanning Calorimeters
E2254-09 - Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers
E2281-08a - Standard Practice for Process and Measurement Capability Indices
E2282-09 - Standard Guide for Defining the Test Result of a Test Method
E2285-08 - Standard Guide for Examination of Mechanical Checkwriter Impressions
E2286-08a - Standard Guide for Examination of Dry Seal Impressions
E2287-09 - Standard Guide for Examination of Fracture Patterns and Paper Fiber Impressions on Single-Strike Film Ribbons and Typed Text
E2288-09 - Standard Guide for Physical Match of Paper Cuts, Tears, and Perforations in Forensic Document Examinations
E2289-08 - Standard Guide for Examination of Rubber Stamp Impressions
E2290-07a - Standard Guide for Examination of Handwritten Items
E2291-03 - Standard Guide for Indentation Examinations
E2325-05e1 - Standard Guide for Non-destructive Examination of Paper
E2326-09 - Standard Practice for Education and Training of Seized-Drug Analysts
E2327-10 - Standard Practice for Quality Assurance of Laboratories Performing Seized-Drug Analysis
E2329-10 - Standard Practice for Identification of Seized Drugs
E2330-04 - Standard Test Method for Determination of Trace Elements in Glass Samples Using Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
E2331-04 - Standard Guide for Examination of Altered Documents
E2334-09 - Standard Practice for Setting an Upper Confidence Bound For a Fraction or Number of Non-Conforming items, or a Rate of Occurrence for Non-conformities, Using Attribute Data, When There is a Zero Response in the Sample
E2344-04(2011) - Standard Guide for Data Capture through the Dictation Process
E2347-11 - Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis
E2364-04(2010) - Standard Guide to Speech Recognition Technology Products in Health Care
E2369-05e2 - Standard Specification for Continuity of Care Record (CCR)
E2388-11 - Standard Guide for Minimum Training Requirements for Forensic Document Examiners
E2389-05 - Standard Guide for Examination of Documents Produced with Liquid Ink Jet Technology
E2390-06 - Standard Guide for Examination of Documents Produced with Toner Technology
E2402-11 - Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
E2403-06 - Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry
E2425-11 - Standard Test Method for Loss Modulus Conformance of Dynamic Mechanical Analyzers
E2427-11 - Standard Test Method for Acceptance by Performance Testing for Sieves
E2436-05(2010) - Standard Specification for the Representation of Human Characteristics Data in Healthcare Information Systems
E2451-08 - Standard Practice for Preserving Ignitable Liquids and Ignitable Liquid Residue Extracts from Fire Debris Samples
E2457-07 - Standard Terminology for Healthcare Informatics
E2473-05(2011) - Standard Practice for the Occupational/Environmental Health View of the Electronic Health Record
E2488-09 - Standard Guide for the Preparation and Evaluation of Liquid Baths Used for Temperature Calibration by Comparison
E2489-11 - Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs
E2494-08 - Standard Guide for Examination of Typewritten Items
E2502-06(2011) - Standard Guide for Medical Transcription Workstations
E2509-08 - Standard Test Method for Temperature Calibration of Rheometers in Isothermal Mode
E2510-07 - Standard Test Method for Torque Calibration or Conformance of Rheometers
E2522-07 - Standard Guide for Quality Indicators for Health Classification
E2538-06(2011) - Standard Practice for Defining and Implementing Pharmacotherapy Information Services within the Electronic Health Record (EHR) Environment and Networked Architectures
E2548-11e1 - Standard Guide for Sampling Seized Drugs for Qualitative and Quantitative Analysis
E2549-09 - Standard Practice for Validation of Seized-Drug Analytical Methods
E2550-11 - Standard Test Method for Thermal Stability by Thermogravimetry
E2551-07 - Standard Test Method for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
E2553-07 - Standard Guide for Implementation of a Voluntary Universal Healthcare Identification System
E2554-07 - Standard Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method in a Single Laboratory Using a Control Sample Program
E2555-07 - Standard Practice for Factors and Procedures for Applying the MIL-STD-105 Plans in Life and Reliability Inspection
E2584-10 - Standard Practice for Thermal Conductivity of Materials Using a Thermal Capacitance (Slug) Calorimeter
E2585-09 - Standard Practice for Thermal Diffusivity by the Flash Method
E2586-10a - Standard Practice for Calculating and Using Basic Statistics
E2587-10 - Standard Practice for Use of Control Charts in Statistical Process Control
E2587-RUS-10 - Стандартная методика применения контрольных карт для статистического управления технологическим процессом
E2589-11 - Standard Terminology Relating to Nonsieving Methods of Powder Characterization
E2593-11e1 - Standard Guide for Accuracy Verification of Industrial Platinum Resistance Thermometers
E2595-07 - Standard Guide for Privilege Management Infrastructure
E2602-09 - Standard Test Method for the Assignment of the Glass Transition Temperature by Modulated Temperature Differential Scanning Calorimetry
E2603-08 - Standard Practice for Calibration of Fixed-Cell Differential Scanning Calorimeters
E2623-08e1 - Standard Practice for Reporting Thermometer Calibrations
E2651-10 - Standard Guide for Powder Particle Size Analysis
E2655-08 - Standard Guide for Reporting Uncertainty of Test Results and Use of the Term Measurement Uncertainty in ASTM Test Methods
E2659-09e1 - Standard Practice for Certificate Programs
E2678-09 - Standard Guide for Education and Training in Computer Forensics
E2682-09 - Standard Guide for Developing a Disaster Recovery Plan for Medical Transcription Departments and Businesses
E2696-09 - Standard Practice for Life and Reliability Testing Based on the Exponential Distribution
E2708-10 - Standard Terminology for Personnel Credentialing
E2709-11 - Standard Practice for Demonstrating Capability to Comply with an Acceptance Procedure
E2710-11e1 - Standard Guide for Preservation of Charred Documents
E2711-11 - Standard Guide for Preservation of Liquid Soaked Documents
E2716-09 - Standard Test Method for Determining Specific Heat Capacity by Sinusoidal Modulated Temperature Differential Scanning Calorimetry
E2730-10 - Standard Practice for Calibration and Use of Thermocouple Reference Junction Probes in Evaluation of Electronic Reference Junction Compensation Circuits
E2744-10 - Standard Test Method for Pressure Calibration of Thermal Analyzers
E2758-10 - Standard Guide for Selection and Use of Wideband, Low Temperature Infrared Thermometers
E2762-10 - Standard Practice for Sampling a Stream of Product by Variables Indexed by AQL
E2763-10 - Standard Practice for Computer Forensics
E2764-11 - Standard Practice for Uncertainty Assessment in the Context of Seized-Drug Analysis
E2765-11 - Standard Practice for Use of Image Capture and Storage Technology in Forensic Document Examination
E2781-11 - Standard Practice for Evaluation of Methods for Determination of Kinetic Parameters by Thermal Analysis
E2782-10 - Standard Guide for Measurement Systems Analysis (MSA)
E2808-11 - Standard Guide for Microspectrophotometry and Color Measurement in Forensic Paint Analysis
E2814-11 - Standard Guide for Industrial Woven Wire Filter Cloth
E2819-11 - Standard Practice for Single- and Multi-Level Continuous Sampling of a Stream of Product by Attributes Indexed by AQL
E2820-11 - Standard Test Method for Evaluating Thermal EMF Properties of Base-Metal Thermocouple Connectors
G7/G7M-11 - Standard Practice for Atmospheric Environmental Exposure Testing of Nonmetallic Materials
G21-09 - Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi
G21-RUS-09 - Стандартная методика определения плеснестойкости синтетических полимерных материалов
G24-05 - Standard Practice for Conducting Exposures to Daylight Filtered Through Glass
G29-96(2010) - Standard Practice for Determining Algal Resistance of Plastic Films
G63-99(2007) - Standard Guide for Evaluating Nonmetallic Materials for Oxygen Service
G72/G72M-09 - Standard Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment
G74-08 - Standard Test Method for Ignition Sensitivity of Materials to Gaseous Fluid Impact
G86-98a(2011) - Standard Test Method for Determining Ignition Sensitivity of Materials to Mechanical Impact in Ambient Liquid Oxygen and Pressurized Liquid and Gaseous Oxygen Environments
G88-05 - Standard Guide for Designing Systems for Oxygen Service
G90-10 - Standard Practice for Performing Accelerated Outdoor Weathering of Nonmetallic Materials Using Concentrated Natural Sunlight
G93-03(2011) - Standard Practice for Cleaning Methods and Cleanliness Levels for Material and Equipment Used in Oxygen-Enriched Environments
G94-05 - Standard Guide for Evaluating Metals for Oxygen Service
G113-09 - Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
G114-07 - Standard Practices for Evaluating the Age Resistance of Polymeric Materials Used in Oxygen Service
G120-01(2008) - Standard Practice for Determination of Soluble Residual Contamination in by Soxhlet Extraction
G121-98(2010)e1 - Standard Practice for Preparation of Contaminated Test Coupons for the Evaluation of Cleaning Agents
G122-96(2008) - Standard Test Method for Evaluating the Effectiveness of Cleaning Agents
G124-10 - Standard Test Method for Determining the Combustion Behavior of Metallic Materials in Oxygen-Enriched Atmospheres
G125-00(2008) - Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
G126-00(2008) - Standard Terminology Relating to the Compatibility and Sensitivity of Materials in Oxygen Enriched Atmospheres
G127-95(2008) - Standard Guide for the Selection of Cleaning Agents for Oxygen Systems
G128-02(2008) - Standard Guide for Control of Hazards and Risks in Oxygen Enriched Systems
G130-06 - Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
G131-96(2008) - Standard Practice for Cleaning of Materials and Components by Ultrasonic Techniques
G136-03(2009) - Standard Practice for Determination of Soluble Residual Contaminants in Materials by Ultrasonic Extraction
G138-06 - Standard Test Method for Calibration of a Spectroradiometer Using a Standard Source of Irradiance
G141-09 - Standard Guide for Addressing Variability in Exposure Testing on Nonmetallic Materials
G144-01(2006) - Standard Test Method for Determination of Residual Contamination of Materials and Components by Total Carbon Analysis Using a High Temperature Combustion Analyzer
G145-08 - Standard Guide for Studying Fire Incidents in Oxygen Systems
G147-09 - Standard Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests
G151-10 - Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
G152-06 - Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
G153-04(2010) - Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
G154-06 - Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials
G155-05a - Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
G156-09 - Standard Practice for Selecting and Characterizing Weathering Reference Materials
G160-03(2009) - Standard Practice for Evaluating Microbial Susceptibility of Nonmetallic Materials by Laboratory Soil Burial
G166-00(2011) - Standard Guide for Statistical Analysis of Service Life Data
G167-05(2010) - Standard Test Method for Calibration of a Pyranometer Using a Pyrheliometer
G169-01(2008)e1 - Standard Guide for Application of Basic Statistical Methods to Weathering Tests
G172-03(2010) - Standard Guide for Statistical Analysis of Accelerated Service Life Data
G173-03(2008) - Standard Tables for Reference Solar Spectral Irradiances: Direct Normal and Hemispherical on 37° Tilted Surface
G175-03(2011) - Standard Test Method for Evaluating the Ignition Sensitivity and Fault Tolerance of Oxygen Regulators Used for Medical and Emergency Applications
G177-03(2008)e1 - Standard Tables for Reference Solar Ultraviolet Spectral Distributions: Hemispherical on 37° Tilted Surface
G178-09 - Standard Practice for Determining the Activation Spectrum of a Material (Wavelength Sensitivity to an Exposure Source) Using the Sharp Cut-On Filter or Spectrographic Technique
G179-04(2011) - Standard Specification for Metal Black Panel and White Panel Temperature Devices for Natural Weathering Tests
G183-05(2010) - Standard Practice for Field Use of Pyranometers, Pyrheliometers and UV Radiometers
G197-08 - Standard Table for Reference Solar Spectral Distributions: Direct and Diffuse on 20° Tilted and Vertical Surfaces
G201-09 - Standard Practice for Conducting Exposures in Outdoor Glass-Covered Exposure Apparatus with Air Circulation
G207-11 - Standard Test Method for Indoor Transfer of Calibration from Reference to Field Pyranometers
SI10-10 - IEEE/ASTM SI 10 American National Standard for Metric Practice