D297-93(2006) - Standard Test Methods for Rubber Products-Chemical Analysis
D297-RUS-93(2006) - Изделия резиновые. Методы испытаний. Химический анализ
D378-10 - Standard Test Methods for Rubber (Elastomeric) Conveyor Belting, Flat Type
D380-94(2006) - Standard Test Methods for Rubber Hose
D395-03(2008) - Standard Test Methods for Rubber Property—Compression Set
D412-06ae2 - Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
D412-RUS-06ae2 - Стандартные методы испытаний вулканизированного каучука и термопластичных эластомеров - растяжение
D413-98(2007) - Standard Test Methods for Rubber Property—Adhesion to Flexible Substrate
D413-RUS-98(2007) - Стандартные методы определения свойств резины — адгезия к гибким субстратам
D429-08 - Standard Test Methods for Rubber Property—Adhesion to Rigid Substrates
D430-06e1 - Standard Test Methods for Rubber Deterioration-Dynamic Fatigue
D454-04(2010) - Standard Test Method for Rubber Deterioration by Heat and Air Pressure
D471-10 - Standard Test Method for Rubber Property—Effect of Liquids
D531-00(2010) - Standard Test Method for Rubber Property-Pusey and Jones Indentation
D572-04(2010) - Standard Test Method for Rubber-Deterioration by Heat and Oxygen
D573-04(2010) - Standard Test Method for Rubber—Deterioration in an Air Oven
D575-91(2007) - Standard Test Methods for Rubber Properties in Compression
D622-99(2005) - Standard Test Methods for Rubber Hose for Automotive Air and Vacuum Brake System
D623-07 - Standard Test Methods for Rubber Property—Heat Generation and Flexing Fatigue In Compression
D624-00(2007) - Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
D624-RUS-00(2007) - Стандартный метод определения прочности на разрыв стандартной вулканизированной резины и термопластических эластомеро
D750-06 - Standard Test Method for Rubber Deterioration Using Artificial Weathering Apparatus
D751-06(2011) - Standard Test Methods for Coated Fabrics
D813-07 - Standard Test Method for Rubber Deterioration-Crack Growth
D814-95(2010) - Standard Test Method for Rubber Property- Vapor Transmission of Volatile Liquids
D816-06(2011) - Standard Test Methods for Rubber Cements
D832-07 - Standard Practice for Rubber Conditioning For Low Temperature Testing
D865-11 - Standard Test Method for Rubber - Deterioration by Heating in Air (Test Tube Enclosure)
D925-06e2 - Standard Test Methods for Rubber Property—Staining of Surfaces (Contact, Migration, and Diffusion)
D926-08 - Standard Test Method for Rubber Property—Plasticity and Recovery (Parallel Plate Method)
D945-06 - Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)
D991-89(2010) - Standard Test Method for Rubber Property-Volume Resistivity Of Electrically Conductive and Antistatic Products
D1052-09 - Standard Test Method for Measuring Rubber Deterioration-Cut Growth Using Ross Flexing Apparatus
D1053-92a(2007) - Standard Test Methods for Rubber Property-Stiffening at Low Temperatures: Flexible Polymers and Coated Fabrics
D1076-10 - Standard Specification for Rubber-Concentrated, Ammonia Preserved, Creamed, and Centrifuged Natural Latex
D1148-07a - Standard Test Method for Rubber Deterioration-Discoloration from Ultraviolet (UV) and Heat Exposure of Light-Colored Surfaces
D1149-07 - Standard Test Methods for Rubber Deterioration-Cracking in an Ozone Controlled Environment
D1149-RUS-07 - Стандартные методы определения снижения качества резин — Трещинообразование в среде с контролируемым содержанием озона
D1171-99(2007) - Standard Test Method for Rubber Deterioration—Surface Ozone Cracking Outdoors or Chamber (Triangular Specimens)
D1229-03(2008) - Standard Test Method for Rubber Property-Compression Set at Low Temperatures
D1278-91a(2011) - Standard Test Methods for Rubber from Natural Sources—Chemical Analysis
D1329-08 - Standard Test Method for Evaluating Rubber Property—Retraction at Lower Temperatures (TR Test)
D1330-04(2010) - Standard Specification for Rubber Sheet Gaskets
D1349-09 - Standard Practice for Rubber-Standard Temperatures for Testing
D1414-94(2008) - Standard Test Methods for Rubber O-Rings
D1415-06 - Standard Test Method for Rubber Property—International Hardness
D1417-10 - Standard Test Methods for Rubber Latices-Synthetic
D1418-10a - Standard Practice for Rubber and Rubber Latices-Nomenclature
D1456-86(2010) - Standard Test Method for Rubber Property—Elongation at Specific Stress
D1460-86(2010) - Standard Test Method for Rubber Property—Change in Length During Liquid Immersion
D1485-07(2011) - Standard Practice for Rubber from Natural Sources—Sampling and Sample Preparation
D1506-99(2007) - Standard Test Methods for Carbon Black-Ash Content
D1506-RUS-99(2007) - Стандартный метод определения содержания золы в техническом углероде
D1508-02(2007)e1 - Standard Test Method for Carbon Black, Pelleted Fines and Attrition
D1508-RUS-02(2007)e1 - Стандартный метод испытаний мелкогранулированного и измельченного технического углерода
D1509-95(2007) - Standard Test Methods for Carbon Black-Heating Loss
D1509-RUS-95(2007) - Стандартные методы определения потерь при нагревании технического углерода
D1510-11a - Standard Test Method for Carbon Black—Iodine Adsorption Number
D1511-10 - Standard Test Method for Carbon Black—Pellet Size Distribution
D1512-05 - Standard Test Methods for Carbon Black-pH Value
D1513-05e2 - Standard Test Method for Carbon Black, Pelleted—Pour Density
D1513-RUS-05e2 - Стандартный метод определения насыпной плотности гранулированного технического углерода
D1514-04(2011) - Standard Test Method for Carbon Black - Sieve Residue
D1519-95(2009)e1 - Standard Test Method for Rubber Chemicals-Melting Range
D1566-11 - Standard Terminology Relating to Rubber
D1618-99(2011) - Standard Test Method for Carbon Black Extractables - Transmittance of Toluene Extract
D1619-11 - Standard Test Methods for Carbon Black—Sulfur Content
D1630-06 - Standard Test Method for Rubber Property-Abrasion Resistance (Footwear Abrader)
D1646-07 - Standard Test Methods for Rubber-Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
D1646-RUS-07 - Стандартные методы испытаний для резин – Вязкость, релаксация напряжений и предвулканизационные характеристики (вискозиметр Муни)
D1765-10 - Standard Classification System for Carbon Blacks Used in Rubber Products
D1765-RUS-10 - Стандартная система классификации технического углерода, используемого в резиновых технических изделиях
D1766-05(2011) - Standard Test Method for Rubber Chemicals - Solubility
D1799-03a(2008) - Standard Practice for Carbon Black—Sampling Packaged Shipments
D1817-05(2011) - Standard Test Method for Rubber Chemicals—Density
D1869-95(2010) - Standard Specification for Rubber Rings for Asbestos-Cement Pipe
D1900-06(2011) - Standard Practice for Carbon Black - Sampling Bulk Shipments
D1917-03(2007) - Standard Test Methods for Rubber Property—Shrinkage of Raw and Compounded Hot-Polymerized Styrene-Butadiene Rubber (SBR)
D1937-10 - Standard Test Method for Carbon Black, Pelleted—Mass Strength
D1991-05(2010) - Standard Test Method for Rubber Chemicals—2-Mercaptobenzothiazole (MBT)—Assay
D1992-91(2006) - Standard Guide for Testing Synthetic Plasticizers Used in Rubber
D1993-03(2008) - Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption
D2000-12 - Standard Classification System for Rubber Products in Automotive Applications
D2084-07 - Standard Test Method for Rubber Property-Vulcanization Using Oscillating Disk Cure Meter
D2084-RUS-07 - Стандартный метод испытания каучуков - вулканизация с использованием кюрометра с колеблющимся ротором
D2136-02(2007) - Standard Test Method for Coated Fabrics-Low-Temperature Bend Test
D2137-11 - Standard Test Methods for Rubber Property - Brittleness Point of Flexible Polymers and Coated Fabrics
D2226-93(2007) - Standard Classification for Various Types of Petroleum Oils for Rubber Compounding Use
D2227-96(2011) - Standard Specification for Natural Rubber (NR) Technical Grades
D2228-04(2009) - Standard Test Method for Rubber Property-Relative Abrasion Resistance by the Pico Abrader Method
D2230-96(2007) - Standard Test Method for Rubber Property-Extrudability of Unvulcanized Compounds
D2240-05(2010) - Standard Test Method for Rubber Property—Durometer Hardness
D2240-RUS-05(2010) - Стандартный метод определения свойств резины - измерение твердости дюрометром
D2414-11 - Standard Test Method for Carbon Black—Oil Absorption Number (OAN)
D2433-07 - Standard Test Methods for Rubber Thread
D2449-88(2011) - Standard Specification for Rubber Bales From Natural Sources—Limit on Coating
D2527-83(2011) - Standard Specification for Rubber Seals—Splice Strength
D2632-01(2008) - Standard Test Method for Rubber Property—Resilience by Vertical Rebound
D2663-08 - Standard Test Methods for Carbon Black—Dispersion in Rubber
D2702-05(2011) - Standard Practice for Rubber Chemicals—Determination of Infrared Absorption Characteristics
D3053-10 - Standard Terminology Relating to Carbon Black
D3137-81(2007) - Standard Test Method for Rubber Property—Hydrolytic Stability
D3156-96(2011) - Standard Practice for Rubber—Chromatographic Analysis of Antidegradants (Antioxidants, Antiozonants and Stabilizers)
D3157-05(2010)e1 - Standard Test Method for Rubber from Natural Sources—Color
D3182-07 - Standard Practice for Rubber-Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
D3183-10 - Standard Practice for Rubber—Preparation of Pieces for Test Purposes from Products
D3184-11 - Standard Practice for Rubber - Evaluation of NR (Natural Rubber)
D3185-06(2010) - Standard Test Methods for Rubber-Evaluation of SBR (Styrene-Butadiene Rubber) Including Mixtures With Oil
D3186-07(2011) - Standard Test Methods for Rubber—Evaluation of SBR (Styrene-Butadiene Rubber) Mixed With Carbon Black or Carbon Black and Oil
D3187-06(2011) - Standard Test Methods for Rubber—Evaluation of NBR (Acrylonitrile-Butadiene Rubber)
D3188-06(2010) - Standard Test Methods for Rubber-Evaluation of IIR (Isobutene-Isoprene Rubber)
D3189-06(2011) - Standard Test Methods for Rubber—Evaluation of Solution BR (Polybutadiene Rubber)
D3190-06(2010) - Standard Test Method for Rubber-Evaluation of Chloroprene Rubber (CR)
D3191-10 - Standard Test Methods for Carbon Black in SBR (Styrene-Butadiene Rubber)—Recipe and Evaluation Procedures
D3192-09 - Standard Test Methods for Carbon Black Evaluation in NR (Natural Rubber)
D3194-04(2009) - Standard Test Method for Rubber From Natural Sources-Plasticity Retention Index (PRI)
D3265-11 - Standard Test Method for Carbon Black-Tint Strength
D3313-05a - Standard Test Method for Carbon Black—Individual Pellet Hardness
D3314-02(2006) - Standard Test Method for Rubber-Chemical Analysis for Polystyrene Blocks In SBR (Styrene-Butadiene Rubber) and Styrene-Reinforced Latices
D3346-07 - Standard Test Methods for Rubber Property-Processability of Emulsion SBR (Styrene-Butadiene Rubber) With the Mooney Viscometer (Delta Mooney)
D3389-10 - Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader)
D3393-91(2009) - Standard Specification for Coated Fabrics-Waterproofness
D3403-07(2011) - Standard Test Methods for Rubber—Evaluation of IR (Isoprene Rubber)
D3452-06 - Standard Practice for Rubber—Identification by Pyrolysis-Gas Chromatography
D3484-06(2010) - Standard Test Methods for Rubber—Evaluation of Oil-Extended Solution BR (Polybutadiene Rubber)
D3492-08 - Standard Specification for Rubber Contraceptives (Male Condoms)
D3493-09 - Standard Test Method for Carbon Black-Oil Absorption Number of Compressed Sample (COAN)
D3566-03(2009) - Standard Practice for Rubber—Determination of Bromine in the Presence of Chlorine by Oxygen Combustion
D3568-03(2009) - Standard Test Methods for Rubber—Evaluation of EPDM (Ethylene Propylene Diene Terpolymers) Including Mixtures With Oil
D3577-09e1 - Standard Specification for Rubber Surgical Gloves
D3578-05(2010) - Standard Specification for Rubber Examination Gloves
D3579-77(2010) - Standard Specification for Rubber Surgical Drainage Tubes, Penrose-Type
D3616-95(2009) - Standard Test Method for Rubber, Raw-Determination of Gel, Swelling Index, and Dilute Solution Viscosity
D3667-05(2010) - Standard Specification for Rubber Seals Used in Flat-Plate Solar Collectors
D3677-10e1 - Standard Test Methods for Rubber - Identification by Infrared Spectrophotometry
D3738-84(2010) - Standard Specification for Rubber-Coated Cloth Hospital Sheeting
D3767-03(2008) - Standard Practice for Rubber—Measurement of Dimensions
D3767-RUS-03(2008) - Стандартная методика измерения размеров резины
D3771-03(2007) - Standard Specification for Rubber Seals Used in Concentrating Solar Collectors
D3772-01(2010) - Standard Specification for Natural Rubber Finger Cots
D3832-79(2011) - Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems
D3847-01(2007) - Standard Practice for Rubber-Directions for Achieving Subnormal Test Temperatures
D3848-03(2009) - Standard Test Methods for Rubber—Evaluation of NBR (Acrylonitrile-Butadiene Copolymers) Mixed With Carbon Black
D3849-07(2011) - Standard Test Method for Carbon Black—Morphological Characterization of Carbon Black Using Electron Microscopy
D3853-08e1 - Standard Terminology Relating to Rubber and Rubber Latices—Abbreviations for Chemicals Used in Compounding
D3854-90(2010) - Standard Test Method for Rubber Thread-Resistance to Dry Heat
D3855-84(2010) - Standard Test Method for Rubber Thread-Deterioration Due to Standard Washing Solution Treatment
D3896-07(2011) - Standard Practice for Rubber From Synthetic Sources—Sampling
D3900-05a(2010) - Standard Test Methods for Rubber-Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
D3902-90(2004)e1 - Standard Test Method for Rubber Hose for Gas Diffusion of Liquefied Petroleum Gas
D3903-03(2007) - Standard Specification for Rubber Seals Used in Air-Heat Transport of Solar Energy Systems
D3958-06(2011) - Standard Test Methods for Rubber—Evaluation of BIIR and CIIR (Halogenated Isobutene—Isoprene Rubber)
D4004-06 - Standard Test Methods for Rubber—Determination of Metal Content by Flame Atomic Absorption (AAS) Analysis
D4005-92(2010) - Standard Test Method for Plastic-Coated Fabrics—Completeness of Fusion of PVC Dispersion Coatings
D4026-06 - Standard Test Method for Rubber Latex—Styrene-Butadiene Copolymer—Determination of Residual Styrene
D4075-06 - Standard Test Methods for Rubber Compounding Materials—Flame Atomic AbsorptionAnalysis—Determination of Metals
D4122-10a - Standard Practice for Carbon Black-Evaluation of an Industry Reference Black
D4295-89(2005) - Standard Classification for Rubber Compounding Materials-Zinc Oxide
D4315-94(2006) - Standard Test Methods for Rubber Compounding Material-Zinc Oxide
D4316-95(2010) - Standard Specification for Elastomeric Water Bottles
D4482-11 - Test Method for Rubber Property - Extension Cycling Fatigue
D4483-05a(2011) - Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries
D4527-99(2011) - Standard Test Method for Carbon Black - Solvent Extractables
D4528-88(2007) - Standard Classification for Rubber Compounding Materials—Sulfur
D4569-06 - Standard Test Method for Rubber Compounding Materials—Determination of Acidity in Sulfur
D4570-02(2007) - Standard Test Method for Rubber Chemicals—Determination of Particle Size of Sulfur by Sieving (Dry)
D4571-06 - Standard Test Methods for Rubber Compounding Materials—Determination of Volatile Material
D4571-RUS-06 - Наполнители резиновой смеси. Методы испытаний. Определение летучих веществ
D4572-89(2005) - Standard Test Method for Rubber Chemicals-Wet Sieve Analysis of Sulfur
D4573-03(2009) - Standard Test Method for Rubber Chemicals—Determination of Oil Content in Oil-Treated Sulfur
D4574-06 - Standard Test Methods for Rubber Compounding Materials—Determination of Ash Content
D4574-RUS-06 - Наполнители резиновой смеси. Методы испытаний. Определение зольности
D4575-09 - Standard Test Methods for Rubber Deterioration—Reference and Alternative Method(s) for Determining Ozone Level in Laboratory Test Chambers
D4578-06 - Standard Test Methods for Rubber Chemicals—Determination of Percent Sulfur by Extraction
D4583-95(2009) - Standard Practice for Carbon Black—Calculation of Process Indexes From an Analysis of Process Control Data
D4620-02(2007) - Standard Test Method for Evaluating the Effective Surface Area of Zinc Oxide in Rubber
D4676-94(2006) - Standard Classification for Rubber Compounding Materials-Antidegradants
D4677-87(2007) - Standard Classification for Rubber Compounding Materials—Titanium Dioxide
D4678-11 - Standard Practice for Rubber - Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials
D4679-02(2007) - Standard Specification for Rubber General Purpose, Household or Beautician Gloves
D4817-88(2005) - Standard Classification for Rubber Compounding Materials-Stearic Acid
D4818-89(2005) - Standard Classification for Rubber Compounding Materials-Vulcanization Accelerators
D4821-07e1 - Standard Guide for Carbon Black - Validation of Test Method Precision and Bias
D4924-89(2005) - Standard Classification for Petroleum Waxes for Use in Rubber Compounding
D4934-02(2006) - Standard Test Method for Rubber Compounding Materials: 2-Benzothiazyl Sulfenamide Accelerators-Insolubles
D4934-RUS-02(2006) - Наполнители резиновой смеси: бензотиазил-сульфенамидные ускорители. Методы испытаний. Определение нерастворимых веществ
D4936-10 - Standard Test Method for Mercaptobenzothiazole Sulfenamide Assay by Reduction/Titration
D4937-96(2006)e1 - Standard Test Method forp-Phenylenediamine Antidegradants Purity by Gas Chromatography
D4937-RUS-96(2006)e1 - Стандартный метод испытаний для определения чистоты противостарителей из п -фенилендиаминов с помощью газовой хроматографии
D5044-06 - Standard Test Method for Rubber Compounding Materials—Free 2-Mercaptobenzothiazole (MBT) in Benzothiazyl Disulfide (MBTS)
D5044-RUS-06 - Наполнители резиновой смеси. Методы определения свободного меркаптобензотиазола (MBT) в бензотиазолдисульфиде (MBTS)
D5051-06 - Standard Test Method for Rubber Compounding Materials—Benzothiazyl Disulfide (MBTS)—Assay
D5051-RUS-06 - Наполнители резиновой смеси. Методы количественного определения бензотиазолдисульфида (MBTS)
D5054-90(2009) - Standard Test Method for Rubber Chemicals-Diphenyl Guanidine (DPG) and Di-o-tolyl-guanidine (DOTG) Assay
D5099-08 - Standard Test Methods for Rubber—Measurement of Processing Properties Using Capillary Rheometry
D5151-06(2011) - Standard Test Method for Detection of Holes in Medical Gloves
D5193/D5193M-93(2007) - Standard Test Method for Coated Fabrics—Air Retention
D5230-10 - Standard Test Method for Carbon Black—Automated Individual Pellet Hardness
D5250-06(2011) - Standard Specification for Poly(vinyl chloride) Gloves for Medical Application
D5289-07a - Standard Test Method for Rubber Property-Vulcanization Using Rotorless Cure Meters
D5289-RUS-07a - Стандартный метод определения свойств каучуков – Вулканизация с использованием безроторных кюрометров
D5297-95(2009) - Standard Test Methods for Rubber Chemical Accelerator-Purity by High Performance Liquid Chromatography
D5376-06 - Standard Test Method for Rubber Compounding Materials—Determination of the Basic Nitrogen Content in Rubber Antioxidant: Polymerized TMQ
D5377-93(2007) - Standard Classification for Rubber Compounding Materials—Ground Coal
D5406-93(2011) - Standard Practice for Rubber - Calculation of Producer's Process Performance Indexes
D5460-02(2006) - Standard Test Method for Rubber Compounding Materials-Water in Rubber Additives
D5461-06 - Standard Test Method for Rubber Compounding Materials—Wet Sieve Analysis of Powdered Rubber Compounding Materials
D5538-07 - Standard Practice for Thermoplastic Elastomers-Terminology and Abbreviations
D5603-01(2008) - Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Particulate Rubber
D5604-96(2006) - Standard Test Methods for Precipitated Silica-Surface Area by Single Point B.E.T. Nitrogen Adsorption
D5605-94(2011) - Standard Practice for Styrene-Butadiene Rubber (SBR)—Establishing Raw Mooney Viscosity Target Values
D5644-01(2008)e1 - Standard Test Methods for Rubber Compounding Materials Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber
D5666-95(2009) - Standard Test Method for P-Phenylenediamine Antidegradants-Purity by High Performance Liquid Chromatography
D5667-95(2010) - Standard Test Method for Rubber From Synthetic Sources-Total and Water Soluble Ash
D5667-RUS-95(2010) - Стандартный метод испытаний каучука промышленного производства — общая и водорастворимая зола
D5668-09 - Standard Test Methods for Rubber From Synthetic Sources-Volatile Matter
D5668-RUS-09 - Стандартный метод испытания искусственного каучука — летучее вещество
D5670-95(2009) - Standard Test Method for Rubber-Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry
D5670-RUS-95(2009) - Определение остаточной ненасыщенности гидрогенизированной нитриловой резины путем инфракрасной спектрофотометрии
D5712-10 - Standard Test Method for Analysis of Aqueous Extractable Protein in Natural Rubber and Its Products Using the Modified Lowry Method
D5774-95(2009) - Standard Test Methods for Rubber-Chemical Analysis of Extractables
D5774-RUS-95(2009) - Стандартные методы испытаний каучука ― химический анализ экстрагируемых веществ
D5775-95(2009) - Standard Test Method for Rubber from Synthetic Sources-Bound Styrene in SBR
D5775-RUS-95(2009) - Стандартный метод испытаний каучуков – Определение связанного стирола в стиролбутадиеновых каучуках с помощью показателя преломления
D5805-00(2009) - Standard Test Method for Rubber from Synthetic Sources--Carbon Black in Masterbatches
D5805-RUS-00(2009) - Стандартные методы испытаний каучука — Определение саженаполнения маточных смесей
D5817-03a(2008) - Standard Practice for Carbon Black, Pelleted - Reduction, Blending, and Drying of Gross Samples for Testing
D5899-98(2008) - Standard Classification System for Rubber Compounding Materials for Use in Computer Material Management Systems
D5900-10a - Standard Specification for Physical and Chemical Properties of Industry Reference Materials (IRM)
D5902-05(2010) - Standard Test Method for Rubber-Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value
D5963-04(2010) - Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader)
D5964-07 - Standard Practice for Rubber IRM 901, IRM 902, and IRM 903 Replacement Oils for ASTM No. 1, ASTM No. 2, and ASTM No. 3 Oils
D5992-96(2011) - Standard Guide for Dynamic Testing of Vulcanized Rubber and Rubber-Like Materials Using Vibratory Methods
D6047-99(2009) - Standard Test Methods for Rubber, Raw--Determination of 5-Ethylidenenorbornene (ENB) or Dicyclopentadiene (DCPD) in Ethylene-Propylene-Diene (EPDM) Terpolymers
D6047-RUS-99(2009) - Стандартные методы испытаний каучука — определение содержания 5-этилденнорборнена (ЭНБ) или дициклопентадиена (ДЦПД) в этилен-пропилен-диеновых тримерах (ЭПДТ)
D6048-07 - Standard Practice for Stress Relaxation Testing of Raw Rubber, Unvulcanized Rubber Compounds, and Thermoplastic Elastomers
D6049-03(2008) - Standard Test Method for Rubber Property-Measurement of the Viscous and Elastic Behavior of Unvulcanized Raw Rubbers and Rubber Compounds by Compression Between Parallel Plates
D6085-97(2011) - Standard Practice for Sampling in Rubber Testing - Terminology and Basic Concepts
D6086-09a - Standard Test Method for Carbon Black—Void Volume (VV)
D6124-06(2011) - Standard Test Method for Residual Powder on Medical Gloves
D6147-97(2008)e1 - Standard Test Method for Vulcanized Rubber and Thermoplastic Elastomer—Determination of Force Decay (Stress Relaxation) in Compression
D6204-07 - Standard Test Method for Rubber-Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
D6284-09 - Standard Test Method for Rubber Property—Effect of Aqueous Solutions with Available Chlorine and Chloramine
D6319-10 - Standard Specification for Nitrile Examination Gloves for Medical Application
D6324-11 - Standard Test Methods for Male Condoms Made from Polyurethane
D6355-07 - Standard Test Method for Human Repeat Insult Patch Testing of Medical Gloves
D6370-99(2009) - Standard Test Method for Rubber-Compositional Analysis by Thermogravimetry (TGA)
D6370-RUS-99(2009) - Стандартный метод испытания резины – Анализ состава с помощью термогравиметрии (ТГА)
D6499-07 - Standard Test Method for The Immunological Measurement of Antigenic Protein in Natural Rubber and its Products
D6515-00(2010) - Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
D6556-10 - Standard Test Method for Carbon Black-Total and External Surface Area by Nitrogen Adsorption
D6600-00(2009) - Standard Practice for Evaluating Test Sensitivity for Rubber Test Methods
D6601-02(2008) - Standard Test Method for Rubber Properties—Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer
D6602-03b(2010)e1 - Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both
D6738-11 - Standard Test Method for Precipitated Silica - Volatile Content
D6738-RUS-11 - Стандартный метод определения содержания летучих веществ в осажденной двуокиси кремния
D6739-11 - Standard Test Method for Silica - pH Value
D6739-RUS-11 - Стандартный метод определения показателя рН водной суспензии двуокиси кремния
D6740-10 - Standard Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Residue on Ignition
D6741-10 - Standard Test Methods for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Sulfur Content
D6746-10 - Standard Test Method for Determination of Green Strength and Stress Relaxation of Raw Rubber or Unvulcanized Compounds
D6814-02(2008) - Standard Test Method for Determination of Percent Devulcanization of Crumb Rubber Based on Crosslink Density
D6843-10 - Standard Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Characterization by Gas Chromatography (GC)
D6844-10 - Standard Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Characterization by High Performance Liquid Chromatography (HPLC)
D6845-02(2008) - Standard Test Method for Silica, Precipitated, Hydrated—CTAB (Cetyltrimethylammonium Bromide) Surface Area
D6854-03(2008) - Standard Test Method for Silica—n-Dibutyl Phthalate Absorption Number
D6909-10 - Standard Specification for High Temperature and Acid-Resistant Fluorocarbon Terpolymer Elastomer
D6915-07 - Standard Practice for Carbon Black-Evaluation of Standard Reference Blacks
D6976-08 - Standard Specification for Rubber Contraceptives—Vaginal Diaphragms
D6977-04(2010) - Standard Specification for Polychloroprene Examination Gloves for Medical Application
D6978-05 - Standard Practice for Assessment of Resistance of Medical Gloves to Permeation by Chemotherapy Drugs
D7050-04(2009) - Standard Practice for Rubber from Natural Sources-Sampling and Sorting Bales Based on Predicted Processing Properties
D7102-10 - Standard Guide for Determination of Endotoxin on Sterile Medical Gloves
D7103-06e1 - Standard Guide for Assessment of Medical Gloves
D7121-05 - Standard Test Method for Rubber Property-Resilience Using Schob Type Rebound Pendulum
D7160-05(2010) - Standard Practice for Determination of Expiration Dating for Medical Gloves
D7161-05(2010) - Standard Practice for Determination of Real Time Expiration Dating of Mature Medical Gloves Stored Under Typical Warehouse Conditions
D7198-05 - Standard Specification for Disposable Embalming Gloves for Single-Use Applications
D7246-06 - Standard Test Method for Detection of Holes in Polyethylene Food Service Gloves
D7329-07 - Standard Specification for Food Preparation and Food Handling (Food Service) Gloves
D7426-08 - Standard Test Method for Assignment of the DSC Procedure for Determining T_g of a Polymer or an Elastomeric Compound
D7427-08e1 - Standard Test Method for Immunological Measurement of Four Principal Allergenic Proteins (Hev b 1, 3, 5 and 6.02) in Natural Rubber and Its Products Derived from Latex
D7558-09 - Standard Test Method for Colorimetric/Spectrophotometric Procedure to Quantify Extractable Chemical Dialkyldithiocarbamate, Thiuram, and Mercaptobenzothiazole Accelerators in Natural Rubber Latex and Nitrile Gloves
D7605-11 - Standard Test Method for Thermoplastic Elastomers - Measurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers
D7633-10b - Standard Test Method for Carbon Black(em dash)Carbon Content
D7661-10 - Standard Test Method for Determining Compatibility of Personal Lubricants with Natural Rubber Latex Condoms
D7662-11 - Standard Test Method for Carbon Content in Carbon Black Feedstock Oils
D7679-11 - Standard Test Method for Sulfur Content in Carbon Black Feedstock Oils
D7723-11 - Standard Test Method for Rubber Property - Macro-Dispersion of Fillers in Compounds
D7724-11 - Standard Test Method for Carbon Black - Non-Dispersible Matter by Mechanical Flushing (NDM)
D7771-11 - Standard Test Method for Determination of Benzo-α-Pyrene (BaP) Content in Carbon Black
D7772-11 - Standard Test Method for Carbon Black Extractables - Absorbance of Cyclohexane Extract
E1136-10 - Standard Specification for P195/75R14 Radial Standard Reference Test Tire
F36-99(2009) - Standard Test Method for Compressibility and Recovery of Gasket Materials
F36-RUS-99(2009) - Стандартный метод определения сжимаемости и возврата к первоначальному состоянию прокладочных материалов
F37-06 - Standard Test Methods for Sealability of Gasket Materials
F38-00(2006) - Standard Test Methods for Creep Relaxation of a Gasket Material
F104-11 - Standard Classification System for Nonmetallic Gasket Materials
F112-00(2006) - Standard Test Method for Sealability of Enveloped Gaskets
F118-04 - Standard Definitions of Terms Relating to Gaskets
F145-72(2009) - Standard Practice for Evaluating Flat-Faced Gasketed Joint Assemblies
F146-04 - Standard Test Methods for Fluid Resistance of Gasket Materials
F147-87(2009) - Standard Test Method for Flexibility of Non-Metallic Gasket Materials
F148-02(2007) - Standard Test Method for Binder Durability of Cork Composition Gasket Materials
F152-95(2009) - Standard Test Methods for Tension Testing of Nonmetallic Gasket Materials
F152-RUS-95(2009) - Стандартные методы испытаний на растяжение неметаллических прокладочных материалов
F336-02(2009) - Standard Practice for Design and Construction of Nonmetallic Enveloped Gaskets for Corrosive Service
F363-99(2011) - Standard Test Method for Corrosion Testing of Gaskets
F377-03(2009) - Standard Practice for Calibration of Braking/Tractive Measuring Devices for Testing Tires
F408-99(2008) - Standard Test Method for Tires for Wet Traction in Straight-Ahead Braking, Using a Towed Trailer
F414-09 - Standard Test Method for Energy Absorbed by a Tire When Deformed by Slow-Moving Plunger
F421-07 - Standard Test Method for Measuring Groove and Void Depth in Passenger Car Tires
F433-02(2009) - Standard Practice for Evaluating Thermal Conductivity of Gasket Materials
F434-93(2009) - Standard Test Method for Blow-Out Testing of Preformed Gaskets
F457-04(2010) - Standard Test Method for Speed and Distance Calibration of Fifth Wheel Equipped With Either Analog or Digital Instrumentation
F495-99a(2011) - Standard Test Method for Weight Loss of Gasket Materials Upon Exposure to Elevated Temperatures
F538-09 - Standard Terminology Relating to the Characteristics and Performance of Tires
F551/F551M-09a - Standard Practice for Using a 1.707-m [67.23-in.] Diameter Laboratory Test Roadwheel in Testing Tires
F559-05(2010) - Standard Test Method for Measuring Length of Road Test Courses Using a Fifth Wheel
F607-03(2008) - Standard Test Method for Adhesion of Gasket Materials to Metal Surfaces
F724-94a(2010)e1 - Standard Test Method for Outdoor Evaluation of Tire Sidewall Component Cracking Resistance
F762/F762M-08 - Standard Test Method for Determining Change in Groove (or Void) Depth With Distance Traveled for Passenger Car Tires
F806-99a(2009) - Standard Test Method for Compressibility and Recovery of Laminated Composite Gasket Materials
F811-02(2010) - Standard Practice for Accelerometer Use in Vehicles for Tire Testing
F868-02(2009) - Standard Classification for Laminated Composite Gasket Materials
F870-94(2010) - Standard Practice for Tread Footprints of Passenger Car Tires Groove Area Fraction and Dimensional Measurements
F1016-07 - Standard Practice for Linear Tire Treadwear Data Analysis
F1035-03(2008) - Standard Practice for Use of Rubber-Cord Pie Disk to Demonstrate the Discernment Capability of a Tire X-ray Imaging System
F1046-01(2008) - Standard Guide for Preparing Artificially Worn Passenger and Light Truck Tires for Testing
F1087-02(2009) - Standard Test Method for Linear Dimensional Stability of a Gasket Material to Moisture
F1112-06a(2010) - Standard Test Method for Static Testing of Tubeless Pneumatic Tires for Rate of Loss of Inflation Pressure
F1276-99(2009) - Standard Test Method for Creep Relaxation of Laminated Composite Gasket Materials
F1277-02(2009) - Standard Test Method for Determination of Leachable Chloride in Packing and Gasketing Materials by Ion-Selective Electrode Technique
F1315-00(2006) - Standard Test Method for Density of a Sheet Gasket Material
F1364-03(2010) - Standard Practice for Use of a Calibration Device to Demonstrate the Inspection Capability of an Interferometric Laser Imaging Nondestructive Tire Inspection System
F1426-11 - Standard Practice for Identifying Tire Tread Surface Irregular Wear Patterns Resulting from Tire Use
F1502-05(2010) - Standard Test Method for Static Measurements on Tires for Passenger Cars, Light Trucks, and Medium Duty Vehicles
F1572-08 - Standard Test Methods for Tire Performance Testing on Snow and Ice Surfaces
F1574-03a(2009) - Standard Test Method for Compressive Strength of Gaskets at Elevated Temperatures
F1650-98(2005) - Standard Practice for Evaluating Tire Traction Performance Data Under Varying Test Conditions
F1805-06 - Standard Test Method for Single Wheel Driving Traction in a Straight Line on Snow- and Ice-Covered Surfaces
F1806-97(2008) - Standard Practice for Tire Testing Operations-Basic Concepts and Terminology for Reference Tire Use
F1909-98(2004) - Specification for Preformed Open-Cell Sponge Rubber Pail and Drum Gaskets
F1922-98(2005) - Standard Test Method for Tires, Pneumatic, Vehicular, Highway
F1923-98(2005) - Standard Test Method for Tires, Pneumatic, Low Speed, Off Highway
F1971-05 - Standard Test Method for Electrical Resistance of Tires Under Load On the Test Bench
F2325-03(2009) - Standard Classification for Multi-Layer Steel (MLS) and Other Metal Layer Gaskets for Transportation Applications
F2378-05(2011) - Standard Test Method for Sealability of Sheet, Composite, and Solid Form-in-Place Gasket Materials
F2466-10 - Standard Practice for Determining Silicone Volatiles in Silicone Rubber for Transportation Applications
F2467-06 - Standard Practice for Measuring Static Sealing Pressure Using Pressure-Indicating Film (PIF) in Transportation Applications
F2468-05(2011) - Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications
F2493-08 - Standard Specification for P225/60R16 97S Radial Standard Reference Test Tire
F2523-07e1 - Standard Practice for Blowout Resistance of Room-Temperature Vulcanized Elastomers
F2524-06 - Standard Practice for Determination of Volatile Content for Formed-in-Place Gaskets (FIPG) Silicone Adhesives and Sealants for Transportation Applications
F2663-07a - Standard Test Method for Bead Unseating of Tubeless Tires for Motor Vehicles with GVWR of 4536 kg (10 000 lb) or Less
F2716-08 - Standard Practice for Comparison of Nonmetallic Flat Gaskets in High Pressure Saturated Steam
F2779-10 - Standard Practice for Commercial Radial Truck-Bus Tires to Establish Equivalent Test Severity Between a 1.707-m (67.23-in.) Diameter Roadwheel and a Flat Surface
F2803-09 - Standard Test Method for Evaluating Rim Slip Performance of Tires and Wheels
F2837-11 - Standard Test Method for Hot Compression Properties of Gasket Materials
F2838-10 - Standard Practice for Accelerated Laboratory Aging of Radial Passenger Car and Light Truck Tires through Load Range E for the Laboratory Generation of Belt Separation
F2869-10 - Standard Practice for Radial Light Truck Tires to Establish Equivalent Test Severity Between a 1.707-m (67.23-in.) Diameter Rotating Roadwheel and a Flat Surface
F2870-11 - Standard Specification for 315/70R22.5 154/150L Radial Truck Standard Reference Test Tire
F2871-11 - Standard Specification for 245/70R19.5 136/134M Radial Truck Standard Reference Test Tire
F2872-11 - Standard Specification for 225/75R16C 116/114S M+S Radial Light Truck Standard Reference Test Tire