C581-03(2008)e1 - Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service
C582-09 - Standard Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment
D256-10 - Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
D256-RUS-10 - Стандартные методы испытаний пластмассы на ударную вязкость по Изоду на маятниковых копрах
D494-11 - Standard Test Method for Acetone Extraction of Phenolic Molded or Laminated Products
D542-00(2006) - Standard Test Method for Index of Refraction of Transparent Organic Plastics
D543-06 - Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents
D570-98(2010)e1 - Standard Test Method for Water Absorption of Plastics
D618-08 - Standard Practice for Conditioning Plastics for Testing
D635-10 - Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
D638-10 - Standard Test Method for Tensile Properties of Plastics
D648-07 - Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
D695-10 - Standard Test Method for Compressive Properties of Rigid Plastics
D696-08 - Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between -30°C and 30°C With a Vitreous Silica Dilatometer
D704-99(2004) - Standard Specification for Melamine-Formaldehyde Molding Compounds
D705-99(2004) - Standard Specification for Urea-Formaldehyde Molding Compounds
D706-09 - Standard Classification System and Basis for Specifications for Cellulose Acetate Molding and Extrusion Compounds
D707-09 - Standard Classification System and Basis for Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds
D731-10 - Standard Test Method for Molding Index of Thermosetting Molding Powder
D732-10 - Standard Test Method for Shear Strength of Plastics by Punch Tool
D746-07 - Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
D747-10 - Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
D785-08 - Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials
D785-RUS-08 - Стандартный метод испытания твердости по Роквеллу для пластиков и электроизоляционных материалов
D787-09 - Standard Specification for Ethyl Cellulose Molding and Extrusion Compounds
D788-11 - Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds
D789-07e1 - Standard Test Methods for Determination of Solution Viscosities of Polyamide (PA)
D790-10 - Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
D790-RUS-10 - Стандартные методы испытаний для определения свойств при изгибе неармированных и армированных пластмасс и электроизоляционных материалов
D792-08 - Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
D792-RUS-08 - Стандартный метод определения плотности и удельного веса (относительной плотности) пластиков по объему вытесненной жидкости
D882-10 - Standard Test Method for Tensile Properties of Thin Plastic Sheeting
D882-RUS-10 - Стандартный метод испытаний на растяжение для тонких пластмассовых покрытий
D883-11 - Standard Terminology Relating to Plastics
D952-10 - Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials
D953-10 - Standard Test Method for Bearing Strength of Plastics
D955-08 - Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics
D957-06 - Standard Practice for Determining Surface Temperature of Molds for Plastics
D1003-11e1 - Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
D1004-09 - Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting
D1042-06 - Standard Test Method for Linear Dimensional Changes of Plastics Under Accelerated Service Conditions
D1043-10 - Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test
D1044-08 - Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion
D1045-08 - Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics
D1055-09 - Standard Specifications for Flexible Cellular Materials-Latex Foam
D1056-07 - Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber
D1201-99(2004) - Standard Specification for Thermosetting Polyester Molding Compounds
D1203-10 - Standard Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods
D1204-08 - Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
D1204-RUS-08 - Стандартный метод определения изменений линейных размеров нежестких термопластичных листов или пленок приповышенной температуре
D1238-10 - Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
D1238-RUS-10 - Стандартный метод определения скоростей истечения расплава термопластиков с помощью экструзионного пластометра
D1239-07 - Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals
D1243-95(2008) - Standard Test Method for Dilute Solution Viscosity of Vinyl Chloride Polymers
D1248-05 - Standard Specification for Polyethylene Plastics Extrusion Materials For Wire and Cable
D1430-11 - Standard Classification System for Polychlorotrifluoroethylene (PCTFE) Plastics
D1435-05 - Standard Practice for Outdoor Weathering of Plastics
D1494-97(2008)e1 - Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels
D1499-05 - Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics
D1505-10 - Standard Test Method for Density of Plastics by the Density-Gradient Technique
D1525-09 - Standard Test Method for Vicat Softening Temperature of Plastics
D1527-99(2005) - Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80
D1562-09 - Standard Classification System and Basis for Specification for Cellulose Acetate Propionate Molding and Extrusion Compounds
D1593-09 - Standard Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting
D1598-02(2009) - Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
D1599-99(2011) - Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
D1600-08 - Standard Terminology for Abbreviated Terms Relating to Plastics
D1601-99(2004) - Standard Test Method for Dilute Solution Viscosity of Ethylene Polymers
D1603-11 - Standard Test Method for Carbon Black Content in Olefin Plastics
D1621-10 - Standard Test Method for Compressive Properties Of Rigid Cellular Plastics
D1622-08 - Standard Test Method for Apparent Density of Rigid Cellular Plastics
D1623-09 - Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics
D1636-99(2004)e1 - Standard Specification for Allyl Molding Compounds
D1667-05(2011) - Standard Specification for Flexible Cellular Materials - Poly (Vinyl Chloride) Foam (Closed-Cell)
D1693-08 - Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics
D1708-10 - Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens
D1709-09 - Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
D1709-RUS-09 - Стандартный метод испытаний пластиковых пленок на ударную прочность методом свободно падающего бойка
D1710-08 - Standard Specification for Extruded Polytetrafluoroethylene (PTFE) Rod, Heavy Walled Tubing and Basic Shapes
D1712-09 - Standard Practice for Resistance of Plastics to Sulfide Staining
D1746-09 - Standard Test Method for Transparency of Plastic Sheeting
D1755-09 - Standard Specification for Poly(Vinyl Chloride) Resins
D1763-00(2005) - Standard Specification for Epoxy Resins
D1784-11 - Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
D1785-06 - Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120
D1786-10 - Standard Specification for Toluene Diisocyanate
D1790-08 - Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact
D1790-RUS-08 - Стандартный метод определения температуры хрупкости пластмассовых листов с помощью удара
D1822-06 - Standard Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials
D1823-95(2009) - Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer
D1824-95(2010) - Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates
D1894-11e1 - Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting
D1895-96(2010)e1 - Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials
D1896/D1896M-10 - Standard Practice for Transfer Molding Test Specimens of Thermosetting Compounds
D1921-06e1 - Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
D1922-09 - Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
D1922-RUS-09 - Стандартный метод определения силы сопротивления разрыву для пластиковых пленок и фольги методом маятника
D1929-11 - Standard Test Method for Determining Ignition Temperature of Plastics
D1938-08 - Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method
D1972-97(2005) - Standard Practice for Generic Marking of Plastic Products
D1998-06 - Standard Specification for Polyethylene Upright Storage Tanks
D2103-10 - Standard Specification for Polyethylene Film and Sheeting
D2105-01(2007)e1 - Standard Test Method for Longitudinal Tensile Properties of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
D2115-10 - Standard Practice for Oven Heat Stability of Poly(Vinyl Chloride) Compositions
D2116-07 - Standard Specification for FEP-Fluorocarbon Molding and Extrusion Materials
D2122-98(2010) - Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
D2124-99(2011) - Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
D2126-09 - Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging
D2143-00(2010) - Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe
D2152-95(2010) - Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion
D2222-09 - Standard Test Method for Methanol Extract of Vinyl Chloride Resins
D2235-04(2011) - Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings
D2238-92(2004) - Standard Test Methods for Absorbance of Polyethylene Due to Methyl Groups at 1378 cm
D2239-12 - Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter
D2241-09 - Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
D2287-11 - Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds
D2290-08 - Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe by Split Disk Method
D2291-09 - Standard Practice for Fabrication of Ring Test Specimens for Glass-Resin Composites
D2310-06 - Standard Classification for Machine-Made "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
D2321-11 - Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
D2343-09 - Standard Test Method for Tensile Properties of Glass Fiber Strands, Yarns, and Rovings Used in Reinforced Plastics
D2383-09 - Standard Practice for Testing Plasticizer Compatibility in Poly(Vinyl Chloride) (PVC) Compounds Under Humid Conditions
D2396-94(2004) - Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer
D2412-11 - Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
D2444-99(2010) - Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
D2457-08e1 - Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics
D2463-10b - Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers
D2464-06 - Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
D2466-06 - Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
D2467-06 - Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
D2513-11c - Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
D2517-06 - Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings
D2538-02(2010) - Standard Practice for Fusion of Poly(Vinyl Chloride) (PVC) Compounds Using a Torque Rheometer
D2561-95(2005) - Standard Test Method for Environmental Stress-Crack Resistance of Blow-Molded Polyethylene Containers
D2562-94(2008) - Standard Practice for Classifying Visual Defects in Parts Molded from Reinforced Thermosetting Plastics
D2563-08 - Standard Practice for Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts
D2564-04(2009)e1 - Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems
D2565-99(2008) - Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications
D2578-09 - Standard Test Method for Wetting Tension of Polyethylene and Polypropylene Films
D2578-RUS-09 - Стандартный метод определения натяжения при смачивании полиэтиленовых и полипропиленовых пленок
D2581-09 - Standard Specification for Polybutylene (PB) Plastics Molding and Extrusion Materials
D2582-09 - Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting
D2582-RUS-09 - Стандартный метод испытаний на сопротивление разрыву при развитии прокола в пластмассовой пленке и тонких листах
D2583-07 - Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
D2584-11 - Standard Test Method for Ignition Loss of Cured Reinforced Resins
D2609-02(2008) - Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe
D2647-10 - Standard Specification for Crosslinkable Ethylene Plastics
D2657-07 - Standard Practice for Heat Fusion Joining of Polyolefin Pipe and Fittings
D2659-11 - Standard Test Method for Column Crush Properties of Blown Thermoplastic Containers
D2661-11 - Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings
D2665-11 - Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
D2672-96a(2009) - Standard Specification for Joints for IPS PVC Pipe Using Solvent Cement
D2673-09 - Standard Specification for Oriented Polypropylene Film
D2680-01(2009) - Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
D2683-10 - Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing
D2684-10 - Standard Test Method for Permeability of Thermoplastic Containers to Packaged Reagents or Proprietary Products
D2729-11 - Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
D2732-08 - Standard Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting
D2732-RUS-08 - Стандартный метод определения неограниченной линейной термической усадки пластиковой пленки и листов
D2734-09 - Standard Test Methods for Void Content of Reinforced Plastics
D2737-12e1 - Standard Specification for Polyethylene (PE) Plastic Tubing
D2741-95(2005) - Standard Test Method for Susceptibility of Polyethylene Bottles to Soot Accumulation
D2749-02(2008) - Standard Symbols for Dimensions of Plastic Pipe Fittings
D2751-05 - Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings
D2765-11 - Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics
D2774-08 - Standard Practice for Underground Installation of Thermoplastic Pressure Piping
D2837-11 - Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products
D2838-09 - Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting
D2839-10 - Standard Practice for Use of a Melt Index Strand for Determining Density of Polyethylene
D2842-06 - Standard Test Method for Water Absorption of Rigid Cellular Plastics
D2843-10 - Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
D2846/D2846M-09be1 - Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems
D2852-95(2008) - Standard Specification for Styrene-Rubber (SR) Plastic Drain Pipe and Fittings
D2855-96(2010) - Standard Practice for Making Solvent-Cemented Joints with Poly(Vinyl Chloride) (PVC) Pipe and Fittings
D2857-95(2007) - Standard Practice for Dilute Solution Viscosity of Polymers
D2857-RUS-95(2007) - Стандартная методика определения вязкости разбавленных растворов полимеров
D2863-10 - Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
D2911-10 - Standard Specification for Dimensions and Tolerances for Plastic Bottles
D2923-08 - Standard Test Method for Rigidity of Polyolefin Film and Sheeting
D2924-01(2006) - Standard Test Method for External Pressure Resistance of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
D2925-01(2007)e1 - Standard Test Method for Beam Deflection of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow
D2949-10 - Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
D2990-09 - Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics
D2992-06 - Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
D2996-01(2007)e1 - Standard Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
D2997-01(2007)e1 - Standard Specification for Centrifugally Cast "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
D3012-07 - Standard Test Method for Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven
D3013-99(2004)e1 - Standard Specification for Epoxy Molding Compounds
D3014-11 - Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position
D3016-97(2010) - Standard Practice for Use of Liquid Exclusion Chromatography Terms and Relationships
D3030-11 - Standard Test Method for Volatile Matter (Including Water) of Vinyl Chloride Resins
D3034-08 - Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
D3035-10 - Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
D3045-92(2010) - Standard Practice for Heat Aging of Plastics Without Load
D3122-95(2009) - Standard Specification for Solvent Cements for Styrene-Rubber (SR) Plastic Pipe and Fittings
D3123-09 - Standard Test Method for Spiral Flow of Low-Pressure Thermosetting Molding Compounds
D3124-98(2011) - Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
D3138-04(2011) - Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components
D3139-98(2011) - Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals
D3159-10 - Standard Specification for Modified ETFE-Fluoropolymer Molding and Extrusion Materials
D3212-07 - Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals
D3222-05(2010) - Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials
D3261-10a - Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
D3262-11 - Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
D3275-08 - Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials
D3291-11 - Standard Practice for Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics Under Compression
D3294-09 - Standard Specification for PTFE Resin Molded Sheet and Molded Basic Shapes
D3295-06(2011) - Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing
D3296-03(2008) - Standard Specification for FEP-Fluorocarbon Tube
D3299-10 - Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
D3299-RUS-10 - Стандартная спецификация на коррозионно-стойкие резервуары с обмоткой нитью из армированной стекловолокномтермореактивной смолы
D3307-10 - Standard Specification for Perfluoroalkoxy (PFA)-Fluorocarbon Resin Molding and Extrusion Materials
D3308-06 - Standard Specification for PTFE Resin Skived Tape
D3311-11 - Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
D3350-10a - Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
D3354-11 - Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method
D3364-99(2011) - Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications
D3367-09 - Standard Test Method for Plasticizer Sorption of Poly(Vinyl Chloride) Resins Under Applied Centrifugal Force
D3368-04(2010) - Standard Specification for FEP-Fluorocarbon Resin Sheet and Film
D3418-08 - Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
D3418-RUS-08 - Стандартный метод определения температур фазового перехода и энтальпий плавления и кристаллизации полимеров с помощью дифференциальной сканирующей калориметрии
D3419-00(2006) - Standard Practice for In-Line Screw-Injection Molding Test Specimens From Thermosetting Compounds
D3420-08a - Standard Test Method for Pendulum Impact Resistance of Plastic Film
D3453-07 - Standard Specification for Flexible Cellular Materials-Urethane for Furniture and Automotive Cushioning, Bedding, and Similar Applications
D3465-00(2007)e1 - Standard Test Method for Purity of Monomeric Plasticizers by Gas Chromatography
D3489-11 - Standard Test Methods for Microcellular Urethane Materials
D3517-11 - Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
D3567-97(2006) - Standard Practice for Determining Dimensions of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings
D3574-11 - Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams
D3575-08 - Standard Test Methods for Flexible Cellular Materials Made From Olefin Polymers
D3576-04(2010) - Standard Test Method for Cell Size of Rigid Cellular Plastics
D3591-97(2011) - Standard Test Method for Determining Logarithmic Viscosity Number of Poly(Vinyl Chloride) (PVC) in Formulated Compounds
D3594-93(2006) - Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers
D3595-02(2007) - Standard Specification for Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet and Film
D3596-09 - Standard Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins
D3641-10a - Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials
D3647-09 - Standard Practice for Classifying Reinforced Plastic Pultruded Shapes According to Composition
D3675-11 - Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
D3676-07 - Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay
D3678-97(2008)e1 - Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions
D3679-11 - Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
D3681-06 - Standard Test Method for Chemical Resistance of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe in a Deflected Condition
D3748-09 - Standard Practice for Evaluating High-Density Rigid Cellular Plastics
D3749-08 - Standard Test Method for Residual Vinyl Chloride Monomer in Poly(Vinyl Chloride) Resins by Gas Chromatographic Headspace Technique
D3753-05e1 - Standard Specification for Glass-Fiber-Reinforced Polyester Manholes and Wetwells
D3754-11 - Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe
D3763-10e1 - Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors
D3768-11 - Standard Test Method for Microcellular Urethanes—Flexural Recovery
D3769-10 - Standard Test Method for Microcellular Urethanes--High Temperature Sag
D3795-00a(2006) - Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer
D3801-10 - Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
D3814-06 - Standard Guide for Locating Combustion Test Methods for Polymeric Materials
D3826-98(2008) - Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test
D3835-08 - Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer
D3839-08 - Standard Guide for Underground Installation of “Fiberglass” (Glass-FiberReinforced Thermosetting-Resin) Pipe
D3840-10 - Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications
D3841-97(2008)e1 - Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels
D3846-08 - Standard Test Method for In-Plane Shear Strength of Reinforced Plastics
D3851-07 - Standard Specification for Urethane Microcellular Shoe Soling Materials
D3892-93(2009) - Standard Practice for Packaging/Packing of Plastics
D3895-07 - Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
D3914-02(2008) - Standard Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod
D3915-06 - Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Pressure Applications
D3916-08 - Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod
D3917-11 - Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes
D3918-11 - Standard Terminology Relating to Reinforced Plastic Pultruded Products
D3935-09 - Standard Specification for Polycarbonate (PC) Unfilled and Reinforced Material
D3965-11 - Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings
D3981-09a - Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications
D3982-08 - Standard Specification for Contact Molded “Fiberglass” (Glass Fiber Reinforced Thermosetting Resin) Ducts
D4000-11 - Standard Classification System for Specifying Plastic Materials
D4001-93(2006) - Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering
D4020-11 - Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials
D4024-05 - Standard Specification for Machine Made "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
D4065-06 - Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures
D4066-01a(2008) - Standard Classification System for Nylon Injection and Extrusion Materials (PA)
D4067-11 - Standard Classification System for and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods
D4068-09 - Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane
D4092-07 - Standard Terminology: Plastics: Dynamic Mechanical Properties
D4093-95(2010) - Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials
D4094-07 - Standard Test Method for Acid Content of Ethylene-Acrylic Acid Copolymers
D4097-01(2010) - Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
D4101-11 - Standard Specification for Polypropylene Injection and Extrusion Materials
D4161-01(2010) - Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals
D4167-97(2007) - Standard Specification for Fiber-Reinforced Plastic Fans and Blowers
D4203-07 - Standard Specification for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials
D4204-06 - Standard Practice for Preparing Plastic Film Specimens for a Round-Robin Study
D4216-06 - Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly(Vinyl Chloride) (CPVC) Building Products Compounds
D4218-96(2008) - Standard Test Method for Determination of Carbon Black Content in Polyethylene Compounds By the Muffle-Furnace Technique
D4226-11 - Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products
D4272-09 - Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop
D4273-11 - Standard Test Method for Polyurethane Raw Materials: Determination of Primary Hydroxyl Content of Polyether Polyols
D4274-11 - Standard Test Methods for Testing Polyurethane Raw Materials: Determination of Hydroxyl Numbers of Polyols
D4275-09 - Standard Test Method for Determination of Butylated Hydroxy Toluene (BHT) in Polymers of Ethylene and Ethylene–Vinyl Acetate (EVA) Copolymers By Gas Chromatography
D4321-09 - Standard Test Method for Package Yield of Plastic Film
D4321-RUS-09 - Стандартный метод испытания выхода упаковки из пластиковой плёнки
D4329-05 - Standard Practice for Fluorescent UV Exposure of Plastics
D4349-10 - Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials
D4350-00(2005) - Standard Test Method for Corrosivity Index of Plastics and Fillers
D4364-05 - Standard Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight
D4385-10 - Standard Practice for Classifying Visual Defects in Thermosetting Reinforced Plastic Pultruded Products
D4396-06 - Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Nonpressure Applications
D4397-10 - Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications
D4398-07 - Standard Test Method for Determining the Chemical Resistance of Fiberglass-Reinforced Thermosetting Resins by One-Side Panel Exposure
D4440-08 - Standard Test Method for Plastics: Dynamic Mechanical Properties Melt Rheology
D4441-04(2010) - Standard Specification for Aqueous Dispersions of Polytetrafluoroethylene
D4443-07 - Standard Test Method for Determining Residual Vinyl Chloride Monomer Content in PPB Range in Vinyl Chloride Homo- and Co-Polymers by Headspace Gas Chromatography
D4459-06 - Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications
D4473-08 - Standard Test Method for Plastics: Dynamic Mechanical Properties: Cure Behavior
D4475-02(2008) - Standard Test Method for Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By the Short-Beam Method
D4476-09 - Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods
D4477-09 - Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit
D4495-00(2005) - Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight
D4508-10 - Standard Test Method for Chip Impact Strength of Plastics
D4526-96(2007) - Standard Practice for Determination of Volatiles in Polymers by Static Headspace Gas Chromatography
D4549-11 - Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)
D4551-96(2008)e1 - Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane
D4591-07 - Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
D4603-03 - Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer
D4603-RUS-03 - Стандартный метод испытаний для измерения характеристической вязкости полиэтилентерефталата (PET) с помощью стеклянного капиллярного вискозиметра
D4634-11a - Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA)
D4635-08a - Standard Specification for Polyethylene Films Made from Low-Density Polyethylene for General Use and Packaging Applications
D4659-09 - Standard Test Methods for Polyurethane Raw Materials: Determination of Specific Gravity of Isocyanates
D4660-06 - Standard Test Methods for Polyurethane Raw Materials: Determination of the Isomer Content of Toluenediisocyanate
D4661-09 - Standard Test Methods for Polyurethane Raw Materials: Determination of Total Chlorine in Isocyanates
D4662-08(2011)e1 - Standard Test Methods for Polyurethane Raw Materials: Determination of Acid and Alkalinity Numbers of Polyols
D4663-10 - Standard Test Method for Polyurethane Raw Materials Determination of Hydrolyzable Chlorine of Isocyanates
D4669-07 - Standard Test Method for Polyurethane Raw Materials: Determination of Specific Gravity of Polyols
D4670-07 - Standard Test Method for Polyurethane Raw Materials Determination of Suspended Matter In Polyols
D4671-05(2010)e1 - Standard Test Method for Polyurethane Raw Materials Determination of Unsaturation of Polyols
D4672-00(2006)e1 - Standard Test Methods for Polyurethane Raw Materials: Determination of Water Content of Polyols
D4673-02(2008) - Standard Classification System for Acrylonitrile-Butadiene-Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials
D4674-02a(2010) - Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments
D4703-10a - Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets
D4726-09 - Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors
D4745-11ae1 - Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials
D4754-11 - Standard Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell
D4756-06 - Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and Soffit
D4801-08 - Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm [0.010 in.] and Greater
D4802-10 - Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet
D4803-10 - Standard Test Method for Predicting Heat Buildup in PVC Building Products
D4804-09 - Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics
D4812-11 - Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics
D4819-96(2005) - Standard Specification for Flexible Cellular Materials Made From Polyolefin Plastics
D4875-11 - Standard Test Methods of Polyurethane Raw Materials: Determination of the Polymerized Ethylene Oxide Content of Polyether Polyols
D4877-10 - Standard Test Method for Polyurethane Raw Materials: Determination of APHA Color in Isocyanates
D4878-08 - Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols
D4883-08 - Standard Test Method for Density of Polyethylene by the Ultrasound Technique
D4889-04(2011) - Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified Isocyanates
D4890-06 - Standard Test Methods for Polyurethane Raw Materials: Determination of Gardner and APHA Color of Polyols
D4894-07 - Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials
D4895-10 - Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion
D4968-09 - Standard Guide for Annual Review of Test Methods and Specifications for Plastics
D4969-07 - Standard Specification for Polytetrafluoroethylene-(PTFE) Coated Glass Fabric
D4976-06 - Standard Specification for Polyethylene Plastics Molding and Extrusion Materials
D4986-10 - Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials
D5017-96(2009)e1 - Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance
D5017-RUS-96(2009)e1 - Определение состава линейного полиэтилена низкой плотности (ЛПЭНП) методом ядерного магнитного резонансатипа «углерод-13»
D5023-07 - Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
D5023-RUS-07 - Стандартный метод испытания пластика: механические свойства при динамическом нагружении: изгиб (трехточечный изгиб)
D5024-07 - Standard Test Method for Plastics: Dynamic Mechanical Properties: In Compression
D5024-RUS-07 - Стандартный метод испытаний пластиков: механические свойства при динамическом нагружении: сжатие
D5025-11 - Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials
D5026-06 - Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension
D5026-RUS-06 - Стандартный метод испытаний пластиков: механические свойства при динамическом нагружении: растяжение
D5028-09 - Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis
D5045-99(2007)e1 - Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials
D5047-09 - Standard Specification for Polyethylene Terephthalate Film and Sheeting
D5048-09 - Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using 125-mm Flame
D5071-06 - Standard Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus
D5083-10 - Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens
D5117-09 - Standard Test Method for Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock
D5132-11 - Standard Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles
D5138-11 - Standard Classification System and Basis for Specification for Liquid Crystal Polymers Molding and Extrusion Materials (LCP)
D5155-10 - Standard Test Methods for Polyurethane Raw Materials Determination of the Isocyanate Content of Aromatic Isocyanates
D5203-07 - Standard Specification for Polyethylene Plastics Molding and Extrusion Materials from Recycled Post-Consumer (HDPE) Sources
D5204-11 - Standard Classification System for Polyamide-Imide (PAI) Molding and Extrusion Materials
D5205-10 - Standard Classification System for Polyetherimide (PEI) Materials
D5206-06a - Standard Test Method for Windload Resistance of Rigid Plastic Siding
D5207-09 - Standard Practice for Confirmation of 20-mm (50-W) and 125-mm (500-W) Test Flames for Small-Scale Burning Tests on Plastic Materials
D5208-09 - Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics
D5210-92(2007) - Standard Test Method for Determining the Anaerobic Biodegradation of Plastic Materials in the Presence of Municipal Sewage Sludge
D5224-00(2006) - Standard Practice for Compression Molding Test Specimens of Thermosetting Molding Compounds
D5225-09 - Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer
D5226-98(2010)e1 - Standard Practice for Dissolving Polymer Materials
D5227-01(2008)e1 - Standard Test Method for Measurement of Hexane Extractable Content of Polyolefins
D5260-04(2010) - Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
D5272-08 - Standard Practice for Outdoor Exposure Testing of Photodegradable Plastics
D5279-08 - Standard Test Method for Plastics: Dynamic Mechanical Properties: In Torsion
D5296-11 - Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography
D5319-97(2008)e1 - Standard Specification for Glass-Fiber Reinforced Polyester Wall and Ceiling Panels
D5336-09 - Standard Specification for Polyphthalamide (PPA) Injection Molding Materials
D5338-11 - Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions. Incorporating Thermophilic Temperatures
D5364-08e1 - Standard Guide for Design, Fabrication, and Erection of Fiberglass Reinforced Plastic Chimney Liners with Coal-Fired Units
D5365-06 - Standard Test Method for Long-Term Ring-Bending Strain of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
D5418-07 - Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever Beam)
D5419-09 - Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Threaded Plastic Closures
D5420-10 - Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
D5421-05(2010) - Standard Specification for Contact Molded "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
D5422-09 - Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer
D5436-03(2008) - Standard Specification for Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and Shapes
D5477-11 - Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR)
D5491-08 - Standard Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding and Extrusion Materials
D5492-10 - Standard Test Method for Determination of Xylene Solubles in Propylene Plastics
D5507-99(2008)e1 - Standard Test Method for Determination of Trace Organic Impurities in Monomer Grade Vinyl Chloride by Capillary Column/Multidimensional Gas Chromatography
D5508-94a(2009)e1 - Standard Test Method for Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary Gas Chromatography (HS-CGC)
D5511-11 - Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions
D5523-10 - Standard Test Method for Polyurethane Raw Materials Acidity by Argentometric Determination of Hydrolyzable Chlorine in Monomeric, Aromatic Isocyanates
D5526-94(2011)e1 - Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill Conditions
D5575-07 - Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers
D5576-00(2006) - Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR)
D5576-RUS-00(2006) - Стандартная методика определения структурных особенностей полиолефинов и полиолефиновых сополимеров методом инфракрасной спектрофотометрии с преобразованием Фурье (методика FT-IR)
D5577-94(2010)e1 - Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics
D5592-94(2010) - Standard Guide for Material Properties Needed in Engineering Design Using Plastics
D5594-98(2004) - Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)
D5628-10 - Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
D5629-11 - Standard Test Method for Polyurethane Raw Materials Determination of Acidity in Low-Acidity Aromatic Isocyanates and Polyurethane Prepolymers
D5630-06 - Standard Test Method for Ash Content in Plastics
D5672-09 - Standard Test Method for Testing Flexible Cellular Materials Measurement of Indentation Force Deflection Using a 25-mm (1-in.) Deflection Technique
D5675-04(2010) - Standard Specification for Fluoropolymer Micropowders
D5677-05(2010) - Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines
D5685-11 - Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings
D5740-11 - Standard Guide for Writing Material Standards in the Classification D4000 Format
D5813-04(2008) - Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems
D5814-10 - Standard Practice for Determination of Contamination in Recycled Poly(Ethylene Terephthalate) (PET) Flakes and Chips Using a Plaque Test
D5857-10 - Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology
D5870-11 - Standard Practice for Calculating Property Retention Index of Plastics
D5926-11 - Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems
D5927-09 - Standard Classification System for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods
D5930-09 - Standard Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique
D5946-09 - Standard Test Method for Corona-Treated Polymer Films Using Water Contact Angle Measurements
D5947-11 - Standard Test Methods for Physical Dimensions of Solid Plastics Specimens
D5948-05e1 - Standard Specification for Molding Compounds, Thermosetting
D5988-03 - Standard Test Method for Determining Aerobic Biodegradation in Soil of Plastic Materials or Residual Plastic Materials After Composting
D5989-11 - Standard Specification for Extruded and Monomer Cast Shapes Made from Nylon (PA)
D5991-09 - Standard Practice for Separation and Identification of Poly(Vinyl Chloride) (PVC) Contamination in Poly(Ethylene Terephthalate) (PET) Flake
D5998-10 - Standard Specification for Molded Polyethylene Shipping and Storage Drums
D6040-06 - Standard Guide to Standard Test Methods for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape
D6041-11 - Standard Specification for Contact-Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings
D6042-09 - Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Polypropylene Homopolymer Formulations Using Liquid Chromatography (LC)
D6068-10 - Standard Test Method for Determining J-R Curves of Plastic Materials
D6070-02(2010) - Standard Test Methods for Physical Properties of Smooth-Wall, Coilable, Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable
D6098-10 - Standard Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC)
D6099-08 - Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates
D6100-11 - Standard Specification for Extruded, Compression Molded and Injection Molded Polyoxymethylene Shapes (POM)
D6108-09 - Standard Test Method for Compressive Properties of Plastic Lumber and Shapes
D6109-10 - Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products
D6110-10 - Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
D6111-09 - Standard Test Method for Bulk Density and Specific Gravity of Plastic Lumber and Shapes by Displacement
D6112-10 - Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes
D6117-10 - Standard Test Methods for Mechanical Fasteners In Plastic Lumber and Shapes
D6150-09 - Standard Test Method for Estimating Processing Losses of Plastisols and Organosols Due to Volatility
D6226-10 - Standard Test Method for Open Cell Content of Rigid Cellular Plastics
D6247-10 - Standard Test Method for Determination of Elemental Content of Polyolefins by Wavelength Dispersive X-ray Fluorescence Spectrometry
D6248-98(2004) - Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
D6261-10 - Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES)
D6263-11 - Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC)
D6265-09 - Standard Practice for Separation of Contaminants in Polymers Using an Extruder Filter Test
D6272-10 - Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
D6287-09 - Standard Practice for Cutting Film and Sheeting Test Specimens
D6288-09 - Standard Practice for Separation and Washing of Recycled Plastics Prior to Testing
D6289-08 - Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics
D6290-05e1 - Standard Test Method for Color Determination of Plastic Pellets
D6338-10 - Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPVs) Based on ASTM Standard Test Methods
D6339-11 - Standard Classification System for and Basis for Specifications for Syndiotactic Polystyrene Molding and Extrusion (SPS)
D6340-98(2007) - Standard Test Methods for Determining Aerobic Biodegradation of Radiolabeled Plastic Materials in an Aqueous or Compost Environment
D6341-10 - Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between -30 and 140°F (-34.4 and 60°C)
D6342-08 - Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy
D6358-11 - Standard Classification System and Basis for Specification for Poly (Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ISO Methods
D6360-07 - Standard Practice for Enclosed Carbon-Arc Exposures of Plastics
D6394-11 - Standard Specification for Sulfone Plastics (SP)
D6395-11 - Standard Test Method for Flatwise Flexural Impact Resistance of Rigid Plastics
D6400-04 - Standard Specification for Compostable Plastics
D6436-08 - Standard Guide for Reporting Properties for Plastics and Thermoplastic Elastomers
D6437-05(2010)e1 - Standard Test Method for Polyurethane Raw Materials: alkalinity in Low-Alkalinity Polyols (Determination of CPR values of Polyols)
D6456-10 - Standard Specification for Finished Parts Made from Polyimide Resin
D6457-08 - Standard Specification for Extruded and Compression Molded Rod and Heavy-Walled Tubing Made from Polytetrafluoroethylene (PTFE)
D6474-99(2006) - Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
D6576-07 - Standard Specification for Flexible Cellular Rubber Chemically Blown
D6585-11 - Standard Specification for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape
D6645-01(2010) - Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
D6662-09 - Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards
D6691-09 - Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in the Marine Environment by a Defined Microbial Consortium or Natural Sea Water Inoculum
D6712-01(2009) - Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes
D6713-01(2009) - Standard Specification for Extruded and Compression Molded Shapes Made from Poly(Vinylidene Fluoride) (PVDF)
D6777-02(2010)e1 - Standard Test Method for Relative Rigidity of Poly(Vinyl Chloride)(PVC) Siding
D6778-06 - Standard Classification for Polyoxymethylene (POM, Acetal) Molding and Extrusion Materials
D6779-11 - Standard Classification System for Polyamide Molding and Extrusion Materials (PA)
D6783-05(2011) - Standard Specification for Polymer Concrete Pipe
D6835-08 - Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE)
D6864-11 - Standard Specification for Color and Appearance Retention of Solid Colored Plastic Siding Products
D6865-11 - Standard Classification System and Basis for Specifications for Acrylonitrile–Styrene–Acrylate (ASA) and Acrylonitrile–EPDM&
D6866-11 - Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
D6867-03(2009) - Standard Specification for Perfluoroalkoxy (PFA)-Fluoropolymer Tubing
D6868-11 - Standard Specification for Labeling of End Items that Incorporate Plastics and Polymers as Coatings or Additives with Paper and Other Substrates Designed to be Aerobically Composted in Municipal or Industrial Facilities
D6869-03(2011) - Standard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water)
D6953-11 - Standard Test Method for Determination of Antioxidants and Erucamide Slip Additives in Polyethylene Using Liquid Chromatography (LC)
D6954-04 - Standard Guide for Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation
D6979-08 - Standard Test Method for Polyurethane Raw Materials: Determination of Basicity in Polyols, Expressed as Percent Nitrogen
D6980-09 - Test Method for Determination of Moisture in Plastics by Loss in Weight
D6988-08 - Standard Guide for Determination of Thickness of Plastic Film Test Specimens
D7026-04 - Standard Guide for Sampling and Reporting of Results for Determination of Biobased Content of Materials via Carbon Isotope Analysis
D7027-05e1 - Standard Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine
D7029-09 - Standard Test Method for Determination of Reactivity of Unsaturated Polyesters and Vinyl Esters at 180.0F [82.2°C]
D7075-04 - Standard Practice for Evaluating and Reporting Environmental Performance of Biobased Products
D7081-05 - Standard Specification for Non-Floating Biodegradable Plastics in the Marine Environment
D7082-04(2010) - Standard Specification for Polyethylene Stay In Place Form System for End Walls for Drainage Pipe
D7083-04(2010)e1 - Standard Practice for Determination of Monomeric Plasticizers in Poly (Vinyl Chloride) (PVC) by Gas Chromatography
D7107-04(2010) - Standard Test Method for Creep Measurement of Self-Lubricating Bushings
D7132-05 - Standard Test Method for Determination of Retained Blowing Agent in Extruded Polystyrene Foam
D7133-11 - Standard Test Method for Polyurethane Raw Materials: Instrumental Measurement of Tristimulus CIELAB Color and Yellowness Index of Liquids
D7134-05 - Standard Test Method for Molecular Mass Averages and Molecular Mass Distribution of Atactic Polystyrene by Matrix Assisted Laser Desorption/Ionization (MALDI)-Time of Flight (TOF) Mass Spectrometry (MS)
D7191-10 - Standard Test Method for Determination of Moisture in Plastics by Relative Humidity Sensor
D7192-10 - Standard Test Method for High Speed Puncture Properties of Plastic Films Using Load and Displacement Sensors
D7193-11 - Standard Specification for Unsintered Pigmented Polytetrafluoroethylene (PTFE) Extruded Film or Tape
D7194-05 - Standard Specification for Aerospace Parts Machined from Polychlorotrifluoroethylene
D7209-06 - Standard Guide for Waste Reduction, Resource Recovery, and Use of Recycled Polymeric Materials and Products
D7210-06 - Standard Practice for Extraction of Additives in Polyolefin Plastics
D7211-06 - Standard Specification for Parts Machined from Polychlorotrifluoroethylene (PCTFE) and Intended for General Use
D7251-11 - Standard Specification for Color and Appearance Retention of Variegated Color Plastic Siding Products
D7252-06(2011)e1 - Standard Test Method for Polyurethane Raw Materials: Determination of Monomer and Isomers in Isocyanates
D7253-06(2011)e1 - Standard Test Method for Polyurethane Raw Materials: Determination of Acidity as Acid Number for Polyether Polyols
D7254-07 - Standard Specification for Polypropylene (PP) Siding
D7258-09 - Standard Specification for Polymeric Piles
D7292-06 - Standard Specification for Extruded, Compression-Molded, and Injection-Molded Basic Shapes of Polyamide-Imide (PAI)
D7293-06 - Standard Test Method for Extruded and Compression-Molded Shapes Made from Polyetherimide (PEI)
D7309-11 - Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
D7310-11 - Standard Guide for Defect Detection and Rating of Plastic Films Using Optical Sensors
D7399-08 - Standard Test Method for Determination of the Amount of Polypropylene (PP) in Polypropylene/LDPE Mixtures Using Infrared Spectrophotometer (FTIR)
D7436-11 - Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology
D7444-11 - Standard Practice for Heat and Humidity Aging of Oxidatively Degradable Plastics
D7445-09 - Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding with Foam Plastic Backing (Backed Vinyl Siding)
D7471-09 - Standard Specification for CPT-Fluoropolymer Molding and Extrusion Materials
D7472-09 - Standard Specification for EFEP-Fluoropolymer Molding and Extrusion Materials
D7474-08 - Standard Practice for Determining Residual Stresses in Extruded or Molded Sulfone Plastic (SP) Parts by Immersion in Various Chemical Reagents
D7475-11 - Standard Test Method for Determining the Aerobic Degradation and Anaerobic Biodegradation of Plastic Materials under Accelerated Bioreactor Landfill Conditions
D7486-08 - Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
D7487-08 - Standard Practice for Polyurethane Raw Materials: Polyurethane Foam Cup Test
D7567-09 - Standard Test Method for Determining Gel Content in Crosslinked Ethylene Plastics Using Pressurized Liquid Extraction
D7611/D7611M-10 - Standard Practice for Coding Plastic Manufactured Articles for Resin Identification
D7711-11e1 - Standard Guide for Description of Polymer Pellet Defects
D7745-11 - Standard Practice for Testing Pultruded Composites
D7774-11 - Standard Test Method for Flexural Fatigue Properties of Plastics
F402-05 - Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings
F405-05 - Standard Specification for Corrugated Polyethylene (PE) Pipe and Fittings
F409-02(2008) - Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings
F412-09 - Standard Terminology Relating to Plastic Piping Systems
F437-09 - Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
F438-09 - Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40
F439-11 - Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
F441/F441M-09 - Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80
F442/F442M-09 - Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR)
F449-02(2008) - Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control
F477-10 - Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe
F480-06be1 - Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80
F481-97(2008) - Standard Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields
F493-10 - Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings
F512-06 - Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation
F585-94(2007) - Standard Practice for Insertion of Flexible Polyethylene Pipe Into Existing Sewers
F610/F610M-10 - Standard Test Method for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings by the Heat Reversion Technique
F628-08 - Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core
F645-11 - Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems
F656-10 - Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings
F667-12 - Standard Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings
F679-08 - Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings
F689-97(2011) - Standard Practice for Determination of the Temperature of Above-Ground Plastic Gas Pressure Pipe Within Metallic Casings
F714-10 - Standard Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter
F725-03(2008)e1 - Standard Practice for Drafting Impact Test Requirements In Thermoplastic Pipe And Fittings Standards
F758-95(2007)e1 - Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Plastic Underdrain Systems for Highway, Airport, and Similar Drainage
F771-99(2005) - Standard Specification for Polyethylene (PE) Thermoplastic High-Pressure Irrigation Pipeline Systems
F794-03(2009) - Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter
F810-07 - Standard Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields
F876-10e1 - Standard Specification for Crosslinked Polyethylene (PEX) Tubing
F877-11a - Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems
F891-10 - Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core
F894-07 - Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe
F905-04(2011) - Standard Practice for Qualification of Polyethylene Saddle-Fused Joints
F913-02(2008) - Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe
F948-94(2011) - Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow
F949-10 - Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings
F1025-94(2011) - Standard Guide for Selection and Use of Full-Encirclement-Type Band Clamps for Reinforcement or Repair of Punctures or Holes in Polyethylene Gas Pressure Pipe
F1041-02(2008) - Standard Guide for Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing
F1055-11 - Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing
F1056-04(2011) - Standard Specification for Socket Fusion Tools for Use in Socket Fusion Joining Polyethylene Pipe or Tubing and Fittings
F1057-10 - Standard Practice for Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC) Pipe by the Heat Reversion Technique
F1216-09 - Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube
F1281-11 - Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
F1282-10 - Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe
F1290-98a(2011) - Standard Practice for Electrofusion Joining Polyolefin Pipe and Fittings
F1336-07 - Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings
F1365-91(2009) - Standard Test Method for Water Infiltration Resistance of Plastic Underground Conduit Joints Which Use Flexible Elastomeric Seals
F1412-09 - Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems
F1417-11a - Standard Practice for Installation Acceptance of Plastic Non-pressure Sewer Lines Using Low-Pressure Air
F1429-99(2009) - Standard Test Method for Assembly Force of Plastic Underground Conduit Joints That Use Flexible Elastomeric Seals Located in the Bell
F1473-11 - Standard Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins
F1483-05 - Standard Specification for Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe
F1488-09e1 - Standard Specification for Coextruded Composite Pipe
F1498-08 - Standard Specification for Taper Pipe Threads 60° for Thermoplastic Pipe and Fittings
F1499-01(2008) - Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV)
F1504-10 - Standard Specification for Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation
F1533-01(2009) - Standard Specification for Deformed Polyethylene (PE) Liner
F1545-97(2009) - Standard Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges
F1563-01(2011) - Standard Specification for Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing
F1588-96(2011) - Standard Test Method for Constant Tensile Load Joint Test (CTLJT)
F1606-05 - Standard Practice for Rehabilitation of Existing Sewers and Conduits with Deformed Polyethylene (PE) Liner
F1668-08 - Standard Guide for Construction Procedures for Buried Plastic Pipe
F1673-10 - Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems
F1674-11 - Standard Test Method for Joint Restraint Products for Use with PVC Pipe
F1675-09 - Standard Practice for Life-Cycle Cost Analysis of Plastic Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits
F1697-09 - Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit
F1698-02(2008) - Standard Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits
F1732-96(2005) - Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer and Drain Pipe Containing Recycled PVC Material
F1733-07 - Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing
F1734-03(2009) - Standard Practice for Qualification of a Combination of Squeeze Tool, Pipe, and Squeeze-Off Procedures to Avoid Long-Term Damage in Polyethylene (PE) Gas Pipe
F1735-09 - Standard Specification for Poly (Vinyl Chloride)(PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits
F1741-08 - Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits
F1743-08 - Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)
F1759-97(2010) - Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications
F1760-01(2011) - Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content
F1802-04(2010) - Standard Test Method for Performance Testing of Excess Flow Valves
F1803-06 - Standard Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter
F1804-08 - Standard Practice for Determining Allowable Tensile Load for Polyethylene (PE) Gas Pipe During Pull-In Installation
F1807-11ae1 - Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
F1865-09 - Standard Specification for Mechanical Cold Expansion Insert Fitting With Compression Sleeve for Cross-linked Polyethylene (PEX) Tubing
F1866-07 - Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings
F1867-06 - Standard Practice for Installation of Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe Type A for Existing Sewer and Conduit Rehabilitation
F1871-11 - Standard Specification for Folded/Formed Poly (Vinyl Chloride) Pipe Type A for Existing Sewer and Conduit Rehabilitation
F1901-10 - Standard Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems
F1924-05(2011) - Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing
F1947-10 - Standard Practice for Installation of Folded Poly (Vinyl Chloride) (PVC) Pipe into Existing Sewers and Conduits
F1948-05(2011) - Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing
F1960-11e1 - Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing
F1961-09 - Standard Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing
F1962-11 - Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings
F1970-05 - Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems
F1973-08 - Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems
F1974-09 - Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe
F1986-01(2011) - Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems
F1987-01(2011) - Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hydronic Heating Systems
F2018-00(2010) - Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
F2019-11 - Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP)
F2021-11 - Standard Guide for Design and Installation of Plastic Siphonic Roof Drainage Systems
F2023-10 - Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Tubing and Systems to Hot Chlorinated Water
F2080-09 - Standard Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe
F2098-08 - Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert and Plastic Insert Fittings
F2135-01(2007) - Standard Specification for Molded Drain, Waste, and Vent (DWV) Short-Pattern Plastic Fittings
F2136-08 - Standard Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe
F2138-09 - Standard Specification for Excess Flow Valves for Natural Gas Service
F2145-09 - Standard Specification for Polyamide 11 (PA 11) and Polyamide 12 (PA12) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 and Polyamide 12 Pipe and Tubing
F2158-08 - Standard Specification for Residential Central-Vacuum Tube and Fittings
F2159-11 - Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
F2160-10 - Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)
F2164-10 - Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Hydrostatic Pressure
F2165-02(2008) - Standard Specification for Flexible Pre-Insulated Piping
F2176-02(2009) - Standard Specification for Mechanical Couplings Used on Polyethylene Conduit, Duct and Innerduct
F2206-11 - Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE) Plastic Pipe, Fittings, Sheet Stock, Plate Stock, or Block Stock
F2207-06 - Standard Specification for Cured-in-Place Pipe Lining System for Rehabilitation of Metallic Gas Pipe
F2231-02(2008) - Standard Test Method for Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes
F2261-06(2011) - Standard Test Method for Pressure Rating Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 and 80 Socket-Type
F2262-09 - Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Tubing OD Controlled SDR9
F2263-07(2011) - Standard Test Method for Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water
F2306/F2306M-11 - Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications
F2331-11 - Standard Test Method for Determining Chemical Compatibility of Substances in Contact with Thermoplastic Pipe and Fittings Materials
F2389-10 - Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems
F2390-07 - Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent (DWV) Pipe and Fittings Having Post-Industrial Recycle Content
F2418-11 - Standard Specification for Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers
F2433-05(2009) - Standard Test Method for Determining Thermoplastic Pipe Wall Stiffness
F2434-09 - Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing
F2435-07 - Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe
F2487-06 - Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Corrugated High Density Polyethylene Pipelines
F2509-06 - Standard Specification for Field-assembled Anodeless Riser Kits for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing
F2510/F2510M-07 - Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated High Density Polyethylene Drainage Pipes
F2536-06b(2011) - Standard Guide for Installing Plastic DWV Piping Suspended from On-Grade Slabs
F2561-11 - Standard Practice for Rehabilitation of a Sewer Service Lateral and Its Connection to the Main Using a One Piece Main and Lateral Cured-in-Place Liner
F2562/F2562M-08 - Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage
F2599-11 - Standard Practice for The Sectional Repair of Damaged Pipe By Means of An Inverted Cured-In-Place Liner
F2600-09 - Standard Specification for Electrofusion Type Polyamide-11 Fittings for Outside Diameter Controlled Polyamide-11 Pipe and Tubing
F2618-09 - Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems
F2619/F2619M-11 - Standard Specification for High-Density Polyethylene (PE) Line Pipe
F2620-11e1 - Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings
F2623-08 - Standard Specification for Polyethylene of Raised Temperature (PE-RT) SDR 9 Tubing
F2634-10 - Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method
F2648/F2648M-11 - Standard Specification for 2 to 60 inch [50 to 1500 mm] Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Land Drainage Applications
F2649-08a - Standard Specification for Corrugated High Density Polyethylene (HDPE) Grease Interceptor Tanks
F2657-07 - Standard Test Method for Outdoor Weathering Exposure of Crosslinked Polyethylene (PEX) Tubing
F2658-07 - Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) SDR 51 and SDR 64 Sewer Pipe and Fittings
F2686-10 - Standard Specification for Glass Fiber Reinforced Thermoplastic Pipe
F2718-09 - Standard Specification for Polyethylene (PE) and Cement Materials for an Encapsulated Cement Mortar Formed in Place Liner System (FIPLS) for the Rehabilitation of Water Pipelines
F2719-09 - Standard Practice for Installation of Polyethylene (PE) and Encapsulated Cement Mortar Formed in Place Lining System (FIPLS) for the Rehabilitation of Water Pipelines
F2720/F2720M-09 - Standard Specification for Glass Fiber Reinforced Polyethylene (PE-GF) Spiral Wound Large Diameter Pipe
F2735-09 - Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing
F2736-10 - Standard Specification for 6 to 30 in. (152 To 762 mm) Polypropylene (PP) Corrugated Single Wall Pipe And Double Wall Pipe
F2737-11 - Standard Specification for Corrugated High Density Polyethylene (HDPE) Water Quality Units
F2762-11 - Standard Specification for 12 to 30 in. [300 to 750 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
F2763-11 - Standard Specification for 30 to 60 in. [750 to 1500 mm] Triple Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
F2764-11a - Standard Specification for 30 to 60 in. [750 to 1500 mm] Polypropylene (PP) Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications
F2767-09 - Standard Specification for Electrofusion Type Polyamide-12 Fittings for Outside Diameter Controlled Polyamide-12 Pipe and Tubing for Gas Distribution
F2768-09 - Standard Specification for Modified Stub ACME Thread Joint with Elastomeric Seal in Plastic Piping Components
F2769-10 - Standard Specification for Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and Distribution Systems
F2785-10a - Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings
F2786-10 - Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Gaseous Media Under Pressure (Pneumatic Leak Testing)
F2787-11 - Standard Practice for Structural Design of Thermoplastic Corrugated Wall Stormwater Collection Chambers
F2788-11 - Standard Specification for Metric-sized Crosslinked Polyethylene (PEX) Pipe
F2805-11 - Standard Specification for Multilayer Thermoplastic And Flexible Steel Pipe And Connections
F2806-10e1 - Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR)
F2817-10 - Standard Specification for Poly (Vinyl Chloride) (PVC) Gas Pressure Pipe and Fittings For Maintenance or Repair
F2818-10 - Standard Specification for Specification for Crosslinked Polyethylene (PEX) Material Gas Pressure Pipe and Tubing
F2829-10 - Standard Specification for Metric-Sized Crosslinked Polyethylene (PEX) Pipe Systems
F2830-11 - Standard Specification for Manufacture and Joining of Polyethylene (PE) Gas Pressure Pipe With a Peelable Polypropylene (PP) Outer Layer
F2831-11 - Standard Practice for Internal Non Structural Epoxy Barrier Coating Material Used In Rehabilitation of Metallic Pressurized Piping Systems
F2854-10 - Standard Specification for Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing
F2855-11 - Standard Specification for Chlorinated Poly(Vinyl Chloride)/Aluminum/Chlorinated Poly(Vinyl Chloride) (CPVC-AL-CPVC) Composite Pressure Tubing
F2880-11a - Standard Specification for Lap-Joint Type Flange Adapters for Polyethylene Pressure Pipe in Nominal Pipe Sizes ¾ in. to 65 in.
F2881-11 - Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications
F2896-11 - Standard Specification for Reinforced Polyethylene Composite Pipe For The Transport Of Oil And Gas And Hazardous Liquids
F2897-11a - Standard Specification for Tracking and Traceability Encoding System of Natural Gas Distribution Components (Pipe, Tubing, Fittings, Valves, and Appurtenances)