|
Standards
A34/A34M-06 - Standard Practice for Sampling and Procurement Testing of Magnetic Materials
A340-03a(2011) - Standard Terminology of Symbols and Definitions Relating to Magnetic Testing A341/A341M-00(2011)e1 - Standard Test Method for Direct Current Magnetic Properties of Materials Using D-C Permeameters and the Ballistic Test Methods A342/A342M-04 - Standard Test Methods for Permeability of Feebly Magnetic Materials A343/A343M-03(2008) - Standard Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame A345-09 - Standard Specification for Flat-Rolled Electrical Steels for Magnetic Applications A348/A348M-05(2011) - Standard Test Method for Alternating Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method, 100 to 10 000 Hz and 25-cm Epstein Frame A596/A596M-95(2009)e1 - Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and Ring Specimens A598/A598M-02(2007) - Standard Test Method for Magnetic Properties of Magnetic Amplifier Cores A664-11 - Standard Practice for Identification of Standard Electrical Steel Grades in ASTM Specifications A677-07 - Standard Specification for Nonoriented Electrical Steel Fully Processed Types A683-05(2010) - Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types A697/A697M-03(2008) - Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods A698/A698M-07 - Standard Test Method for Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields A712-07 - Standard Test Method for Electrical Resistivity of Soft Magnetic Alloys A717/A717M-06 - Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens A719/A719M-02(2007) - Standard Test Method for Lamination Factor of Magnetic Materials A720/A720M-02(2011) - Standard Test Method for Ductility of Nonoriented Electrical Steel A721/A721M-02(2011) - Standard Test Method for Ductility of Oriented Electrical Steel A726-05(2010) - Standard Specification for Cold-Rolled Magnetic Lamination Quality Steel, Semiprocessed Types A753-08 - Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080) A772/A772M-00(2011)e1 - Standard Test Method for AC Magnetic Permeability of Materials Using Sinusoidal Current A773/A773M-01(2009) - Standard Test Method for dc Magnetic Properties of Materials Using Ring and Permeameter Procedures with dc Electronic Hysteresigraphs A801-09 - Standard Specification for Wrought Iron-Cobalt High Magnetic Saturation Alloys (UNS R30005 and K92650) A804/A804M-04(2009)e1 - Standard Test Methods for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Sheet-Type Test Specimens A811-03(2008) - Standard Specification for Soft Magnetic Iron Parts Fabricated by Powder Metallurgy (P/M) Techniques A838-02(2007) - Standard Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloy Bar for Relay Applications A839-02(2008) - Standard Specification for Iron-Phosphorus Powder Metallurgy (P/M) Parts for Soft Magnetic Applications A848-01(2011) - Standard Specification for Low-Carbon Magnetic Iron A867-03(2008) - Standard Specification for Iron-Silicon Relay Steels A876-09 - Standard Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed Types A889/A889M-03(2008) - Standard Test Method for Alternating-Current Magnetic Properties of Materials at Low Magnetic Flux Density Using the Voltmeter-Ammeter-Wattmeter-Varmeter Method and 25-cm Epstein Frame A893/A893M-03(2008) - Standard Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies A894/A894M-00(2011)e1 - Standard Test Method for Saturation Magnetization or Induction of Nonmetallic Magnetic Materials A900/A900M-01(2006) - Standard Test Method for Lamination Factor of Amorphous Magnetic Strip A901-03(2008) - Standard Specification for Amorphous Magnetic Core Alloys, Semi-Processed Types A904-09 - Standard Specification for 50 Nickel-50 Iron Powder Metallurgy Soft Magnetic Parts A912/A912M-11 - Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Toroidal Specimens A927/A927M-11 - Standard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method A932/A932M-01(2006) - Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Sheet Specimens A937/A937M-06 - Standard Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces A971/A971M-10 - Standard Test Method for Measuring Edge Taper and Crown of Flat-Rolled Electrical Steel Coils A976-03(2008) - Standard Classification of Insulating Coatings by Composition, Relative Insulating Ability and Application A977/A977M-07 - Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs A1009-05(2010) - Standard Specification for Soft Magnetic MnZn Ferrite Core Materials for High Frequency (10 kHz-1 MHz) Power Transformer and Filter Inductor Applications A1013-00(2005) - Standard Test Method for High-Frequency (10 kHz-1 MHz) Core Loss of Soft Magnetic Core Components at Controlled Temperatures Using the Voltmeter-Ammeter-Wattmeter Method A1036-04(2009) - Standard Guide for Measuring Power Frequency Magnetic Properties of Flat-Rolled Electrical Steels Using Small Single Sheet Testers A1054-07 - Standard Specification for Sintered Ceramic Ferrite Permanent Magnets A1071/A1071M-11 - Standard Test Method for Evaluating Hygrothermal Corrosion Resistance of Permanent Magnet Alloys B117-11 - Standard Practice for Operating Salt Spray (Fog) Apparatus B611-85(2005) - Standard Test Method for Abrasive Wear Resistance of Cemented Carbides C876-09 - Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete E3-11 - Standard Guide for Preparation of Metallographic Specimens E4-10 - Standard Practices for Force Verification of Testing Machines E4-RUS-10 - Стандартные методики силовой поверки испытательных машин E6-09be1 - Standard Terminology Relating to Methods of Mechanical Testing E7-03(2009) - Standard Terminology Relating to Metallography E8/E8M-09 - Standard Test Methods for Tension Testing of Metallic Materials E8/E8M-RUS-09 - Стандартные методы испытаний металлических материалов на растяжение E9-09 - Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature E10-10 - Standard Test Method for Brinell Hardness of Metallic Materials E10-RUS-10 - Стандартный метод определения твердости по Бринеллю для материалов с металлическими свойствами E18-08b - Standard Test Methods for Rockwell Hardness of Metallic Materials E18-RUS-08b - Стандартные методы определения твердости по Роквеллу для материалов с металлическими свойствами E21-09 - Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials E23-07ae1 - Standard Test Methods for Notched Bar Impact Testing of Metallic Materials E23-RUS-07ae1 - Материалы металлические. Методы испытаний на удар образца с надрезом E32-86(2006)e1 - Standard Practices for Sampling Ferroalloys and Steel Additives for Determination of Chemical Composition E34-11 - Standard Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys E37-05(2011) - Standard Test Methods for Chemical Analysis of Pig Lead E45-11 - Standard Test Methods for Determining the Inclusion Content of Steel E45-RUS-11 - Стандартные методы определения содержания неметаллических включений в стали E50-11 - Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials E53-07 - Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry E55-11 - Standard Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition E60-11 - Standard Practice for Analysis of Metals, Ores, and Related Materials by Spectrophotometry E74-06 - Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines E81-96(2011) - Standard Test Method for Preparing Quantitative Pole Figures E82-09 - Standard Test Method for Determining the Orientation of a Metal Crystal E83-10a - Standard Practice for Verification and Classification of Extensometer Systems E88-11 - Standard Practice for Sampling Nonferrous Metals and Alloys in Cast Form for Determination of Chemical Composition E94-04(2010) - Standard Guide for Radiographic Examination E110-10 - Standard Test Method for Indentation Hardness of Metallic Materials by Portable Hardness Testers E111-04(2010) - Standard Test Method for Young's Modulus, Tangent Modulus, and Chord Modulus E112-10 - Standard Test Methods for Determining Average Grain Size E114-10 - Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing E125-63(2008) - Standard Reference Photographs for Magnetic Particle Indications on Ferrous Castings E127-10 - Standard Practice for Fabricating and Checking Aluminum Alloy Ultrasonic Standard Reference Blocks E130-08 - Standard Practice for Designation of Shapes and Sizes of Graphite Electrodes E131-10 - Standard Terminology Relating to Molecular Spectroscopy E132-04(2010) - Standard Test Method for Poisson's Ratio at Room Temperature E135-11a - Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials E139-11 - Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials E140-07 - Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness E140-RUS-07 - Стандартные переводные таблицы между твердостью металлов по Бринеллю, по Виккерсу, по Роквеллу, по Кнупу, по склероскопу и поверхностной твердостью E143-02(2008) - Standard Test Method for Shear Modulus at Room Temperature E155-10 - Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings E164-08 - Standard Practice for Contact Ultrasonic Testing of Weldments E165-09 - Standard Practice for Liquid Penetrant Examination for General Industry E168-06 - Standard Practices for General Techniques of Infrared Quantitative Analysis E169-04(2009) - Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis E175-82(2010) - Standard Terminology of Microscopy E186-10 - Standard Reference Radiographs for Heavy-Walled (2 to 4½-in. (50.8 to 114-mm)) Steel Castings E186-RUS-10 - Стандартные эталонные рентгенограммы толстостенных (толщиной от 2 до 41/2 дюйма (от 50.8 до 114 мм)) стальных литых изделий E190-92(2008) - Standard Test Method for Guided Bend Test for Ductility of Welds E192-04(2010)e1 - Standard Reference Radiographs of Investment Steel Castings of Aerospace Applications E204-98(2007) - Standard Practices for Identification of Material by Infrared Absorption Spectroscopy, Using the ASTM Coded Band and Chemical Classification Index E208-06 - Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels E209-00(2010) - Standard Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates E213-09 - Standard Practice for Ultrasonic Testing of Metal Pipe and Tubing E215-11 - Standard Practice for Standardizing Equipment for Electromagnetic Testing of Seamless Aluminum-Alloy Tube E238-84(2008) - Standard Test Method for Pin-Type Bearing Test of Metallic Materials E242-01(2010) - Standard Reference Radiographs for Appearances of Radiographic Images as Certain Parameters Are Changed E243-09 - Standard Practice for Electromagnetic (Eddy-Current) Examination of Copper and Copper-Alloy Tubes E246-10 - Standard Test Methods for Determination of Iron in Iron Ores and Related Materials by Dichromate Titrimetry E247-01(2010) - Standard Test Method for Determination of Silica in Manganese Ores, Iron Ores, and Related Materials by Gravimetry E248-07 - Standard Test Method for Determination of Manganese in Manganese Ores by Pyrophosphate Complexed Permanganate Potentiometric Titrimetry E248-RUS-07 - Стандартный метод испытаний для определения содержания марганца в марганцевых рудах методом потенциометрического титрования с использованием пирофосфата и перманганата E250-98(2009) - Standard Practice for Use of CODEN E251-92(2009) - Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages E255-07 - Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition E260-96(2011) - Standard Practice for Packed Column Gas Chromatography E272-10 - Standard Reference Radiographs for High-Strength Copper-Base and Nickel-Copper Alloy Castings E273-10 - Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing E275-08 - Describing and Measuring Performance of Ultraviolet and Visible Spectrophotometers E276-03(2008)e1 - Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Finer for Metal-Bearing Ores and Related Materials E278-01(2010)e1 - Standard Test Method for Determination of Phosphorus in Iron Ores by Phosphomolybdate Coprecipitation and Nitric Acid Titrimetry E279-97(2010) - Standard Test Method for Determination of Abrasion Resistance of Iron Ore Pellets and Sinter by the Tumbler Test E280-10 - Standard Reference Radiographs for Heavy-Walled (4½ to 12-in. (114 to 305-mm)) Steel Castings E290-09 - Standard Test Methods for Bend Testing of Material for Ductility E290-RUS-09 - Стандартные методы испытаний материалов на пластичность при изгибе E292-09e1 - Standard Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials E305-07 - Standard Practice for Establishing and Controlling Atomic Emission Spectrochemical Analytical Curves E309-11 - Standard Practice for Eddy-Current Examination of Steel Tubular Products Using Magnetic Saturation E310-10 - Standard Reference Radiographs for Tin Bronze Castings E314-10 - Standard Test Methods for Determination of Manganese in Iron Ores by Pyrophosphate (Potentiometric) and Periodate (Photometric) Techniques E316-11 - Standard Test Method for Determination of Iron in Manganese Ores by Hydrogen Sulfide Reduction-Dichromate Titrimetry E317-11 - Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse-Echo Testing Instruments and Systems without the Use of Electronic Measurement Instruments E322-96(2004) - Standard Test Method for X-Ray Emission Spectrometric Analysis of Low-Alloy Steels and Cast Irons E328-02(2008) - Standard Test Methods for Stress Relaxation Tests for Materials and Structures E334-01(2007) - Standard Practice for General Techniques of Infrared Microanalysis E340-00(2006) - Standard Test Method for Macroetching Metals and Alloys E340-RUS-00(2006) - Металлы и сплавы. Стандартный метод контроля макроструктуры травлением E342-11 - Standard Test Method for Determination of Chromium Oxide in Chrome Ores by Permanganate Titrimetry E345-93(2008) - Standard Test Methods of Tension Testing of Metallic Foil E350-95(2005)e1 - Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron E350-RUS-95(2005)e1 - Методы испытаний для химического анализа углеродистой, низколегированной, электротехнической стали, технически чистого и кованого железа. E351-93(2006) - Standard Test Methods for Chemical Analysis of Cast Iron-All Types E352-93(2006) - Standard Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels E353-93(2006) - Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys E353-RUS-93(2006) - Сплавы нержавеющие жаропрочные мартенситно-стареющие и другие аналогичные хром-никель-железные. Методы химического анализа E354-93(2006) - Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys E355-96(2007) - Standard Practice for Gas Chromatography Terms and Relationships E363-09 - Standard Test Methods for Chemical Analysis of Chromium and Ferrochromium E367-09 - Standard Test Methods for Chemical Analysis of Ferroniobium E372-01(2006) - Standard Test Method for Determination of Calcium and Magnesium in Magnesium Ferrosilicon E376-11 - Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic) Testing Methods E381-01(2006) - Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings E381-RUS-01(2006) - Стандартный метод контроля макроструктуры травлением для стального сортового проката, сутунок, блюмов и поковок E382-07 - Standard Test Method for Determination of Crushing Strength of Iron Ore Pellets E384-11 - Standard Test Method for Knoop and Vickers Hardness of Materials E386-90(2011) - Standard Practice for Data Presentation Relating to High-Resolution Nuclear Magnetic Resonance (NMR) Spectroscopy E387-04(2009) - Standard Test Method for Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque Filter Method E388-04(2009) - Standard Test Method for Wavelength Accuracy and Spectral Bandwidth of Fluorescence Spectrometers , E389-03(2008)e1 - Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Coarser for Metal-Bearing Ores and Related Materials E390-11 - Standard Reference Radiographs for Steel Fusion Welds E396-12 - Standard Test Methods for Chemical Analysis of Cadmium E399-09e2 - Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness Ic of Metallic Materials E406-81(2008) - Standard Practice for Using Controlled Atmospheres in Spectrochemical Analysis E407-07e1 - Standard Practice for Microetching Metals and Alloys E415-08 - Standard Test Method for Atomic Emission Vacuum Spectrometric Analysis of Carbon and Low-Alloy Steel E415-RUS-08 - Стандартный Метод атомно-эмиссионного вакуумного спектрометричского анализа углеродистой и низколегированной стали E426-98(2007) - Standard Practice for Electromagnetic (Eddy-Current) Examination of Seamless and Welded Tubular Products, Austenitic Stainless Steel and Similar Alloys E427-95(2006) - Standard Practice for Testing for Leaks Using the Halogen Leak Detector(Alkali-Ion Diode) E428-08 - Standard Practice for Fabrication and Control of Metal, Other than Aluminum, Reference Blocks Used in Ultrasonic Testing E428-RUS-08 - Стандартная методика изготовления и контроля металлических (неалюминиевых) эталонных образцов, используемых для ультразвуковой дефектоскопии E431-96(2007) - Standard Guide to Interpretation of Radiographs of Semiconductors and Related Devices E432-91(2011) - Standard Guide for Selection of a Leak Testing Method E433-71(2008) - Standard Reference Photographs for Liquid Penetrant Inspection E436-03(2008) - Standard Test Method for Drop-Weight Tear Tests of Ferritic Steels E436-RUS-03(2008) - Стандартный метод испытания ферритных сталей на разрыв падающим грузом E439-10 - Standard Test Methods for Chemical Analysis of Beryllium E446-10 - Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness E446-RUS-10 - Стандартные эталонные рентгенограммы стальных литых изделий толщиной до 2 дюймов (50.8 мм) E448-82(2008) - Standard Practice for Scleroscope Hardness Testing of Metallic Materials E463-09 - Standard Test Method for Determination of Silica in Fluorspar by Silico-Molybdate Visible Spectrometry E465-11 - Standard Test Methods for Determination of Manganese (IV) in Manganese Ores by Redox Titrimetry E466-07 - Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials E467-08e1 - Standard Practice for Verification of Constant Amplitude Dynamic Forces in an Axial Fatigue Testing System E468-11 - Standard Practice for Presentation of Constant Amplitude Fatigue Test Results for Metallic Materials E478-08 - Standard Test Methods for Chemical Analysis of Copper Alloys E479-91(2006) - Standard Guide for Preparation of a Leak Testing Specification E493/E493M-11 - Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode E494-10 - Standard Practice for Measuring Ultrasonic Velocity in Materials E498/E498M-11 - Standard Practice for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode E499/E499M-11 - Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode E505-01(2011) - Standard Reference Radiographs for Inspection of Aluminum and Magnesium Die Castings E507-09 - Standard Test Method for Determination of Aluminum in Iron Ores by Flame Atomic Absorption Spectrometry E508-09 - Standard Test Method for Determination of Calcium and Magnesium in Iron Ores by Flame Atomic Absorption Spectrometry E515-11 - Standard Practice for Leaks Using Bubble Emission Techniques E516-95a(2005) - Standard Practice for Testing Thermal Conductivity Detectors Used in Gas Chromatography E517-00(2010) - Standard Test Method for Plastic Strain Ratio r for Sheet Metal E520-08 - Standard Practice for Describing Photomultiplier Detectors in Emission and Absorption Spectrometry E536-08 - Standard Test Methods for Chemical Analysis of Zinc and Zinc Alloys E539-11 - Standard Test Method for Analysis of Titanium Alloys by X-Ray Fluorescence Spectrometry E543-09 - Standard Specification for Agencies Performing Nondestructive Testing E545-05(2010) - Standard Test Method for Determining Image Quality in Direct Thermal Neutron Radiographic Examination E561-10e1 - Standard Test Method for K-R Curve Determination E562-11 - Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count E566-09 - Standard Practice for Electromagnetic (Eddy-Current) Sorting of Ferrous Metals E569-07 - Standard Practice for Acoustic Emission Monitoring of Structures During Controlled Stimulation E570-09 - Standard Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products E571-98(2007)e1 - Standard Practice for Electromagnetic (Eddy-Current) Examination of Nickel and Nickel Alloy Tubular Products E572-02a(2006)e2 - Standard Test Method for Analysis of Stainless and Alloy Steels by X-ray Fluorescence Spectrometry E573-01(2007) - Standard Practices for Internal Reflection Spectroscopy E578-07 - Standard Test Method for Linearity of Fluorescence Measuring Systems E579-04(2009) - Standard Test Method for Limit of Detection of Fluorescence of Quinine Sulfate in Solution E581-10 - Standard Test Methods for Chemical Analysis of Manganese-Copper Alloys E587-10 - Standard Practice for Ultrasonic Angle-Beam Contact Testing E592-99(2009)e1 - Standard Guide to Obtainable ASTM Equivalent Penetrameter Sensitivity for Radiography of Steel Plates 1/4 to 2 in. (6 to 51 mm) Thick with X Rays and 1 to 6 in. (25 to 152 mm) Thick with Cobalt-60 E594-96(2011) - Standard Practice for Testing Flame Ionization Detectors Used in Gas or Supercritical Fluid Chromatography E604-83(2008) - Standard Test Method for Dynamic Tear Testing of Metallic Materials E606-04e1 - Standard Practice for Strain-Controlled Fatigue Testing E634-05 - Standard Practice for Sampling of Zinc and Zinc Alloys for Optical Emission Spectrometric Analysis E643-09 - Standard Test Method for Ball Punch Deformation of Metallic Sheet Material E646-07 - Standard Test Method for Tensile Strain-Hardening Exponents (n -Values) of Metallic Sheet Materials E647-11e1 - Standard Test Method for Measurement of Fatigue Crack Growth Rates E650-97(2007) - Standard Guide for Mounting Piezoelectric Acoustic Emission Sensors E664/E664M-10 - Standard Practice for the Measurement of the Apparent Attenuation of Longitudinal Ultrasonic Waves by Immersion Method E682-92(2011) - Standard Practice for Liquid Chromatography Terms and Relationships E684-04 - Standard Practice for Approximate Determination of Current Density of Large-Diameter Ion Beams for Sputter Depth Profiling of Solid Surfaces E685-93(2005) - Standard Practice for Testing Fixed-Wavelength Photometric Detectors Used in Liquid Chromatography E689-10 - Standard Reference Radiographs for Ductile Iron Castings E690-10 - Standard Practice for In Situ Electromagnetic (Eddy-Current) Examination of Nonmagnetic Heat Exchanger Tubes E697-96(2011) - Standard Practice for Use of Electron-Capture Detectors in Gas Chromatography E703-09 - Standard Practice for Electromagnetic (Eddy-Current) Sorting of Nonferrous Metals E709-08 - Standard Guide for Magnetic Particle Testing E709-RUS-08 - Стандартное руководство по магнитопорошковой дефектоскопии E716-10 - Standard Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of Chemical Composition by Spectrochemical Analysis E738-11 - Standard Test Method for Determination of Aluminum in Iron Ores and Related Materials by EDTA Complexometric Titrimetry E739-10 - Standard Practice for Statistical Analysis of Linear or Linearized Stress-Life ( E740/E740M-03(2010)e1 - Standard Practice for Fracture Testing with Surface-Crack Tension Specimens E746-07 - Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems E747-04(2010) - Standard Practice for Design, Manufacture and Material Grouping Classification of Wire Image Quality Indicators (IQI) Used for Radiology E748-02(2008) - Standard Practices for Thermal Neutron Radiography of Materials E749-07 - Standard Practice for Acoustic Emission Monitoring During Continuous Welding E750-10 - Standard Practice for Characterizing Acoustic Emission Instrumentation E751-07 - Standard Practice for Acoustic Emission Monitoring During Resistance Spot-Welding E766-98(2008)e1 - Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope E768-99(2010) - Standard Guide for Preparing and Evaluating Specimens for Automatic Inclusion Assessment of Steel E797/E797M-10 - Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method E801-06 - Standard Practice for Controlling Quality of Radiological Examination of Electronic Devices E802-95(2010) - Standard Reference Radiographs for Gray Iron Castings Up to 4 1/2 in. (114 mm) in Thickness E803-91(2008) - Standard Test Method for Determining the L/D Ratio of Neutron Radiography Beams E815-11 - Standard Test Method for Determination of Calcium Fluoride in Fluorspar by Complexometric Titrimetry E826-08 - Standard Practice for Testing Homogeneity of a Metal Lot or Batch in Solid Form by Spark Atomic Emission Spectrometry E827-08 - Standard Practice for Identifying Elements by the Peaks in Auger Electron Spectroscopy E837-08e1 - Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method E837-RUS-08e1 - Стандартный метод тензометрического определения остаточных напряжений с использованием высверливаемого отверстия E840-95(2005) - Standard Practice for Using Flame Photometric Detectors in Gas Chromatography E841-04 - Standard Test Method for Determination of Copper in Iron Ores and Related Materials by Atomic Absorption Spectroscopy E855-08 - Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading E877-08 - Standard Practice for Sampling and Sample Preparation of Iron Ores and Related Materials for Determination of Chemical Composition E878-11 - Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrometry E882-10 - Standard Guide for Accountability and Quality Control in the Chemical Analysis Laboratory E883-11 - Standard Guide for Reflected–Light Photomicrography E908-98(2004) - Standard Practice for Calibrating Gaseous Reference Leaks E915-10 - Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement E925-09 - Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Slit Width does not Exceed 2 nm E930-99(2007) - Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size) E932-89(2007) - Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers E945-07 - Standard Test Method for Determination of Zinc in Zinc Ores and Concentrates by Complexometric Titrimetry E958-93(2005) - Standard Practice for Measuring Practical Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers E963-95(2010) - Standard Practice for Electrolytic Extraction of Phases from Ni and Ni-Fe Base Superalloys Using a Hydrochloric-Methanol Electrolyte E975-03(2008) - Standard Practice for X-Ray Determination of Retained Austenite in Steel with Near Random Crystallographic Orientation E976-10 - Standard Guide for Determining the Reproducibility of Acoustic Emission Sensor Response E977-05(2010) - Standard Practice for Thermoelectric Sorting of Electrically Conductive Materials E983-10 - Standard Guide for Minimizing Unwanted Electron Beam Effects in Auger Electron Spectroscopy E984-06 - Standard Guide for Identifying Chemical Effects and Matrix Effects in Auger Electron Spectroscopy E986-04(2010) - Standard Practice for Scanning Electron Microscope Beam Size Characterization E995-11 - Standard Guide for Background Subtraction Techniques in Auger Electron Spectroscopy and X-Ray Photoelectron Spectroscopy E996-10 - Standard Practice for Reporting Data in Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy E999-10 - Standard Guide for Controlling the Quality of Industrial Radiographic Film Processing E1000-98(2009) - Standard Guide for Radioscopy E1001-11 - Standard Practice for Detection and Evaluation of Discontinuities by the Immersed Pulse-Echo Ultrasonic Method Using Longitudinal Waves E1002-11 - Standard Practice for Leaks Using Ultrasonics E1003-05 - Standard Test Method for Hydrostatic Leak Testing E1004-09 - Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy-Current) Method E1009-95(2006) - Standard Practice for Evaluating an Optical Emission Vacuum Spectrometer to Analyze Carbon and Low-Alloy Steel E1010-09 - Standard Practice for Preparation of Disk Specimens of Steel and Iron for Spectrochemical Analysis by Remelting E1012-05 - Standard Practice for Verification of Test Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application E1016-07 - Standard Guide for Literature Describing Properties of Electrostatic Electron Spectrometers E1019-11 - Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Fusion Techniques E1025-11 - Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiology E1030-05(2011) - Standard Test Method for Radiographic Examination of Metallic Castings E1032-06 - Standard Test Method for Radiographic Examination of Weldments E1033-09 - Standard Practice for Electromagnetic (Eddy-Current) Examination of Type F-Continuously Welded (CW) Ferromagnetic Pipe and Tubing Above the Curie Temperature E1049-85(2011)e1 - Standard Practices for Cycle Counting in Fatigue Analysis E1059-91(2006) - Standard Practice for Designating Shapes and Sizes of Nongraphite Counter Electrodes E1065-08 - Standard Guide for Evaluating Characteristics of Ultrasonic Search Units E1066-95(2006) - Standard Test Method for Ammonia Colorimetric Leak Testing E1067/E1067M-11 - Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels E1070-11 - Standard Test Method for Determination of Phosphorus in Iron Ores by Phospho-Molybdenum-Blue Spectrophotometry E1077-01(2005) - Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens E1077-RUS-01(2005) - Стандартные методы оценки глубины обезуглероживания стальных образцов E1078-09 - Standard Guide for Specimen Preparation and Mounting in Surface Analysis E1079-10 - Standard Practice for Calibration of Transmission Densitometers E1085-09 - Standard Test Method for Analysis of Low-Alloy Steels by X-Ray Fluorescence Spectrometry E1086-08 - Standard Test Method for Optical Emission Vacuum Spectrometric Analysis of Stainless Steel by the Point-to-Plane Excitation Technique E1097-07 - Standard Guide for Direct Current Plasma-Atomic Emission Spectrometry Analysis E1097-RUS-07 - Стандартное руководство по спектрометрическому анализу атомно-плазменной эмиссии постоянного тока E1106-07 - Standard Test Method for Primary Calibration of Acoustic Emission Sensors E1114-09e1 - Standard Test Method for Determining the Size of Iridium-192 Industrial Radiographic Sources E1118/E1118M-11 - Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP) E1127-08 - Standard Guide for Depth Profiling in Auger Electron Spectroscopy E1135-97(2008)e1 - Standard Test Method for Comparing the Brightness of Fluorescent Penetrants E1139-07 - Standard Practice for Continuous Monitoring of Acoustic Emission from Metal Pressure Boundaries E1140-95(2010)e1 - Standard Practice for Testing Nitrogen/Phosphorus Thermionic Ionization Detectors for Use In Gas Chromatography E1151-93(2011) - Standard Practice for Ion Chromatography Terms and Relationships E1158-09 - Standard Guide for Material Selection and Fabrication of Reference Blocks for the Pulsed Longitudinal Wave Ultrasonic Testing of Metal and Metal Alloy Production Material E1161-09 - Standard Practice for Radiologic Examination of Semiconductors and Electronic Components E1162-11 - Standard Practice for Reporting Sputter Depth Profile Data in Secondary Ion Mass Spectrometry (SIMS) E1165-04(2010) - Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging E1172-87(2003) - Standard Practice for Describing and Specifying a Wavelength-Dispersive X-Ray Spectrometer E1180-08 - Standard Practice for Preparing Sulfur Prints for Macrostructural Evaluation E1181-02(2008) - Standard Test Methods for Characterizing Duplex Grain Sizes E1184-10 - Standard Practice for Determination of Elements by Graphite Furnace Atomic Absorption Spectrometry E1208-10 - Standard Practice for Fluorescent Liquid Penetrant Testing Using the Lipophilic Post-Emulsification Process E1209-10 - Standard Practice for Fluorescent Liquid Penetrant Testing Using the Water-Washable Process E1210-10 - Standard Practice for Fluorescent Liquid Penetrant Testing Using the Hydrophilic Post-Emulsification Process E1211-07 - Standard Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors E1212-09 - Standard Practice for Quality Management Systems for Nondestructive Testing Agencies E1213-97(2009) - Standard Test Method for Minimum Resolvable Temperature Difference for Thermal Imaging Systems E1217-05 - Standard Practice for Determination of the Specimen Area Contributing to the Detected Signal in Auger Electron Spectrometers and Some X-Ray Photoelectron Spectrometers E1219-10 - Standard Practice for Fluorescent Liquid Penetrant Testing Using the Solvent-Removable Process E1220-10 - Standard Practice for Visible Penetrant Testing Using Solvent-Removable Process E1221-10 - Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels E1237-93(2009) - Standard Guide for Installing Bonded Resistance Strain Gages E1245-03(2008) - Standard Practice for Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic Image Analysis E1251-11 - Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Spark Atomic Emission Spectrometry E1252-98(2007) - Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis E1254-08 - Standard Guide for Storage of Radiographs and Unexposed Industrial Radiographic Films E1255-09 - Standard Practice for Radioscopy E1257-93(2008) - Standard Guide for Evaluating Grinding Materials Used for Surface Preparation in Spectrochemical Analysis E1268-01(2007) - Standard Practice for Assessing the Degree of Banding or Orientation of Microstructures E1277-08 - Standard Test Method for Chemical Analysis of Zinc-5 % Aluminum-Mischmetal Alloys by ICP Emission Spectrometry E1282-11 - Standard Guide for Specifying the Chemical Compositions and Selecting Sampling Practices and Quantitative Analysis Methods for Metals, Ores, and Related Materials E1290-08e1 - Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement E1303-95(2010) - Practice for Refractive Index Detectors Used in Liquid Chromatography E1304-97(2008)e1 - Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials E1306-11 - Standard Practice for Preparation of Metal and Alloy Samples by Electric Arc Remelting for the Determination of Chemical Composition E1311-89(2010) - Standard Test Method for Minimum Detectable Temperature Difference for Thermal Imaging Systems E1312-09 - Standard Practice for Electromagnetic (Eddy-Current) Examination of Ferromagnetic Cylindrical Bar Product Above the Curie Temperature E1316-11b - Standard Terminology for Nondestructive Examinations E1319-98(2009) - Standard Guide for High-Temperature Static Strain Measurement E1320-10 - Standard Reference Radiographs for Titanium Castings E1324-11 - Standard Guide for Measuring Some Electronic Characteristics of Ultrasonic Testing Instruments E1329-10 - Standard Practice for Verification and Use of Control Charts in Spectrochemical Analysis E1335-08 - Standard Test Methods for Determination of Gold in Bullion by Fire Assay Cupellation Analysis E1351-01(2006) - Standard Practice for Production and Evaluation of Field Metallographic Replicas E1359-09 - Standard Guide for Evaluating Capabilities of Nondestructive Testing Agencies E1361-02(2007) - Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis E1382-97(2010) - Standard Test Methods for Determining Average Grain Size Using Semiautomatic and Automatic Image Analysis E1390-06 - Standard Specification for Illuminators Used for Viewing Industrial Radiographs E1409-08 - Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique E1411-09 - Standard Practice for Qualification of Radioscopic Systems E1416-09 - Standard Test Method for Radioscopic Examination of Weldments E1417/E1417M-11 - Standard Practice for Liquid Penetrant Testing E1418-10 - Standard Practice for Visible Penetrant Testing Using the Water-Washable Process E1419-09 - Standard Practice for Examination of Seamless, Gas-Filled, Pressure Vessels Using Acoustic Emission E1421-99(2009) - Standard Practice for Describing and Measuring Performance of Fourier Transform Mid-Infrared (FT-MIR) Spectrometers: Level Zero and Level One Tests E1426-98(2009)e1 - Standard Test Method for Determining the Effective Elastic Parameter for X-Ray Diffraction Measurements of Residual Stress E1438-11 - Standard Guide for Measuring Widths of Interfaces in Sputter Depth Profiling Using SIMS E1441-11 - Standard Guide for Computed Tomography (CT) Imaging E1444/E1444M-11 - Standard Practice for Magnetic Particle Testing E1446-05 - Standard Test Method for Chemical Analysis of Refined Gold by Direct Current Plasma Emission Spectrometry E1447-09 - Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity/Infrared Detection Method E1449-92(2011) - Standard Guide for Supercritical Fluid Chromatography Terms and Relationships E1450-09 - Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium E1453-09 - Standard Guide for Storage of Magnetic Tape Media that Contains Analog or Digital Radioscopic Data E1454-02(2008) - Standard Guide for Data Fields for Computerized Transfer of Digital Ultrasonic Testing Data E1457-07e4 - Standard Test Method for Measurement of Creep Crack Growth Times in Metals E1473-09 - Standard Test Methods for Chemical Analysis of Nickel, Cobalt, and High-Temperature Alloys E1475-02(2008) - Standard Guide for Data Fields for Computerized Transfer of Digital Radiological Examination Data E1476-04(2010) - Standard Guide for Metals Identification, Grade Verification, and Sorting E1479-99(2005) - Standard Practice for Describing and Specifying Inductively-Coupled Plasma Atomic Emission Spectrometers E1495-02(2007) - Standard Guide for Acousto-Ultrasonic Assessment of Composites, Laminates, and Bonded Joints E1496-05(2010) - Standard Test Method for Neutron Radiographic Dimensional Measurements E1504-11 - Standard Practice for Reporting Mass Spectral Data in Secondary Ion Mass Spectrometry (SIMS) E1507-98(2003) - Standard Guide for Describing and Specifying the Spectrometer of an Optical Emission Direct-Reading Instrument E1508-98(2008) - Standard Guide for Quantitative Analysis by Energy-Dispersive Spectroscopy E1510-95(2005) - Standard Practice for Installing Fused Silica Open Tubular Capillary Columns in Gas Chromatographs E1511-93(2010) - Standard Practice for Testing Conductivity Detectors Used in Liquid and Ion Chromatography E1523-09 - Standard Guide to Charge Control and Charge Referencing Techniques in X-Ray Photoelectron Spectroscopy E1543-00(2006) - Standard Test Method for Noise Equivalent Temperature Difference of Thermal Imaging Systems E1544-99(2004)e1 - Standard Practice for Construction of a Stepped Block and Its Use to Estimate Errors Produced by Speed-of-Sound Measurement Systems for Use on Solids E1552-08 - Standard Test Method for Determining Hafnium in Zirconium and Zirconium Alloys By Direct Current Plasma—Atomic Emission Spectrometry E1558-09 - Standard Guide for Electrolytic Polishing of Metallographic Specimens E1561-93(2009) - Standard Practice for Analysis of Strain Gage Rosette Data E1568-03(2008)e1 - Standard Test Method for the Determination of Gold in Activated Carbon by Fire Assay Gravimetry E1569-09 - Standard Test Method for Determination of Oxygen in Tantalum Powder by Inert Gas Fusion Technique E1570-11 - Standard Practice for Computed Tomographic (CT) Examination E1571-11 - Standard Practice for Electromagnetic Examination of Ferromagnetic Steel Wire Rope E1577-11 - Standard Guide for Reporting of Ion Beam Parameters Used in Surface Analysis E1578-06 - Standard Guide for Laboratory Information Management Systems (LIMS) E1587-10 - Standard Test Methods for Chemical Analysis of Refined Nickel E1600-07 - Standard Test Method for Determination of Gold in Cyanide Solutions by Atomic Absorption Spectrometry E1601-10 - Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method E1603/E1603M-11 - Standard Practice for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode E1606-09 - Standard Practice for Electromagnetic (Eddy-Current) Examination of Copper Redraw Rod for Electrical Purposes E1614-94(2004) - Standard Guide for Procedure for Measuring Ionizing Radiation-Induced Attenuation in Silica-Based Optical Fibers and Cables for Use in Remote Fiber-Optic Spectroscopy and Broadband Systems E1621-05 - Standard Guide for X-Ray Emission Spectrometric Analysis E1629-07 - Standard Practice for Determining the Impedance of Absolute Eddy-Current Probes E1634-11 - Standard Guide for Performing Sputter Crater Depth Measurements E1635-06(2011) - Standard Practice for Reporting Imaging Data in Secondary Ion Mass Spectrometry (SIMS) E1636-10 - Standard Practice for Analytically Describing Depth-Profile and Linescan-Profile Data by an Extended Logistic Function E1642-00(2010) - Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis E1647-09 - Standard Practice for Determining Contrast Sensitivity in Radioscopy E1648-95(2011) - Standard Reference Radiographs for Examination of Aluminum Fusion Welds E1653-94(2004) - Standard Guide for Specifying Dynamic Characteristics of Optical Radiation Transmitting Fiber Waveguides E1654-94(2004) - Standard Guide for Measuring Ionizing Radiation-Induced Spectral Changes in Optical Fibers and Cables for Use in Remote Raman FiberOptic Spectroscopy E1655-05 - Standard Practices for Infrared Multivariate Quantitative Analysis E1655-RUS-05 - Правила проведения многомерного количественного анализа в инфракрасной области спектра E1657-98(2011) - Standard Practice for Testing Variable-Wavelength Photometric Detectors Used in Liquid Chromatography E1659-05 - Standard Test Methods Coating Weight and Chemical Analysis of Zinc-Nickel Alloy Electrolytically Coated on Steel Sheet E1672-06 - Standard Guide for Computed Tomography (CT) System Selection E1681-03(2008)e2 - Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials E1683-02(2007) - Standard Practice for Testing the Performance of Scanning Raman Spectrometers E1685-00(2006) - Standard Practice for Measuring the Change in Length of Fasteners Using the Ultrasonic Pulse-Echo Technique E1695-95(2006)e1 - Standard Test Method for Measurement of Computed Tomography (CT) System Performance E1698-95(2010) - Standard Practice for Testing Electrolytic Conductivity Detectors (ELCD) Used in Gas Chromatography E1734-09 - Standard Practice for Radioscopic Examination of Castings E1735-07 - Standard Test Method for Determining Relative Image Quality of Industrial Radiographic Film Exposed to X-Radiation from 4 to 25 MeV E1736-10 - Standard Practice for Acousto-Ultrasonic Assessment of Filament-Wound Pressure Vessels E1742/E1742M-11 - Standard Practice for Radiographic Examination E1747-95(2011) - Standard Guide for Purity of Carbon Dioxide Used in Supercritical Fluid Applications E1763-06 - Standard Guide for Interpretation and Use of Results from Interlaboratory Testing of Chemical Analysis Methods E1770-95(2006) - Standard Practice for Optimization of Electrothermal Atomic Absorption Spectrometric Equipment E1771-07 - Standard Test Method for Determination of Copper in Anode and Blister Copper E1774-96(2007) - Standard Guide for Electromagnetic Acoustic Transducers (EMATs) E1781-08 - Standard Practice for Secondary Calibration of Acoustic Emission Sensors E1790-04(2010) - Standard Practice for Near Infrared Qualitative Analysis E1791-96(2008)e1 - Standard Practice for Transfer Standards for Reflectance Factor for Near-Infrared Instruments Using Hemispherical Geometry E1805-07 - Standard Test Method for Fire Assay Determination of Gold in Copper Concentrates by Gravimetry E1806-09 - Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition E1813-96(2007) - Standard Practice for Measuring and Reporting Probe Tip Shape in Scanning Probe Microscopy E1814-96(2007) - Standard Practice for Computed Tomographic (CT) Examination of Castings E1815-08 - Standard Test Method for Classification of Film Systems for Industrial Radiography E1816-07 - Standard Practice for Ultrasonic Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques E1817-08 - Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs) E1820-11 - Standard Test Method for Measurement of Fracture Toughness E1823-11 - Standard Terminology Relating to Fatigue and Fracture Testing E1829-09 - Standard Guide for Handling Specimens Prior to Surface Analysis E1832-08 - Standard Practice for Describing and Specifying a Direct Current Plasma Atomic Emission Spectrometer E1833-07a - Standard Practice for Sampling of Blister Copper in Cast Form for Determination of Chemical Composition E1834-09 - Standard Test Method for Determination of Lead in Nickel Alloys by Graphite Furnace Atomic Absorption Spectrometry E1835-09 - Standard Test Method for Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry E1840-96(2007) - Standard Guide for Raman Shift Standards for Spectrometer Calibration E1852-08 - Standard Test Method for Determination of Low Levels of Antimony in Carbon and Low-Alloy Steel by Graphite Furnace Atomic Absorption Spectrometry E1856-97(2008) - Standard Guide for Evaluating Computerized Data Acquisition Systems Used to Acquire Data from Universal Testing Machines E1862-97(2010) - Standard Test Methods for Measuring and Compensating for Reflected Temperature Using Infrared Imaging Radiometers E1865-97(2007) - Standard Guide for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air E1866-97(2007) - Standard Guide for Establishing Spectrophotometer Performance Tests E1875-08 - Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance E1876-09 - Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration E1880-06 - Standard Practice for Tissue Cryosection Analysis with SIMS E1881-06 - Standard Guide for Cell Culture Analysis with SIMS E1888/E1888M-07 - Standard Practice for Acoustic Emission Examination of Pressurized Containers Made of Fiberglass Reinforced Plastic with Balsa Wood Cores E1897-97(2010) - Standard Test Methods for Measuring and Compensating for Transmittance of an Attenuating Medium Using Infrared Imaging Radiometers E1898-07 - Standard Test Method for Determination of Silver in Copper Concentrates by Flame Atomic Absorption Spectrometry E1901-08 - Standard Guide for Detection and Evaluation of Discontinuities by Contact Pulse-Echo Straight-Beam Ultrasonic Methods E1914-07 - Standard Practice for Use of Terms Relating to the Development and Evaluation of Methods for Chemical Analysis E1915-11 - Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials for Carbon, Sulfur, and Acid-Base Characteristics E1916-11 - Standard Guide for Identification of Mixed Lots of Metals E1917-08 - Standard Test Method for Determination of Phosphorus in Nickel, Ferronickel, and Nickel Alloys by Phosphovanadomolybdate Molecular Absorption Spectrometry E1920-03(2008) - Standard Guide for Metallographic Preparation of Thermal Sprayed Coatings E1921-11a - Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range E1922-04(2010)e1 - Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials E1928-07 - Standard Practice for Estimating the Approximate Residual Circumferential Stress in Straight Thin-walled Tubing E1930-07 - Standard Practice for Examination of Liquid-Filled Atmospheric and Low-Pressure Metal Storage Tanks Using Acoustic Emission E1931-09 - Standard Guide for X-Ray Compton Scatter Tomography E1932-07 - Standard Guide for Acoustic Emission Examination of Small Parts E1933-99a(2010) - Standard Test Methods for Measuring and Compensating for Emissivity Using Infrared Imaging Radiometers E1934-99a(2010) - Standard Guide for Examining Electrical and Mechanical Equipment with Infrared Thermography E1935-97(2008) - Standard Test Method for Calibrating and Meausring CT Density E1936-03(2007) - Standard Reference Radiograph for Evaluating the Performance of Radiographic Digitization Systems E1938-08 - Standard Test Method for Determination of Titanium in Nickel Alloys by Diantipyrylmethane Molecular Absorption Spectrometry E1941-10 - Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis E1942-98(2010)e1 - Standard Guide for Evaluating Data Acquisition Systems Used in Cyclic Fatigue and Fracture Mechanics Testing E1944-98(2007) - Standard Practice for Describing and Measuring Performance of Laboratory Fourier Transform Near-Infrared (FT-NIR) Spectrometers: Level Zero and Level One Tests E1947-98(2009) - Standard Specification for Analytical Data Interchange Protocol for Chromatographic Data E1948-98(2009) - Standard Guide for Analytical Data Interchange Protocol for Chromatographic Data E1949-03(2009) - Standard Test Method for Ambient Temperature Fatigue Life of Metallic Bonded Resistance Strain Gages E1950-10 - Standard Practice for Reporting Results from Methods of Chemical Analysis E1951-02(2007) - Standard Guide for Calibrating Reticles and Light Microscope Magnifications E1955-04(2009) - Standard Radiographic Examination for Soundness of Welds in Steel by Comparison to Graded ASTM E 390 Reference Radiographs E1961-11 - Standard Practice for Mechanized Ultrasonic Testing of Girth Welds Using Zonal Discrimination with Focused Search Units E1962-09 - Standard Practice for Ultrasonic Surface Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques E1982-98(2007) - Standard Practice for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air E1999-11 - Standard Test Method for Analysis of Cast Iron by Spark Atomic Emission Spectrometry E2001-08 - Standard Guide for Resonant Ultrasound Spectroscopy for Defect Detection in Both Metallic and Non-Metallic Parts E2002-98(2009) - Standard Practice for Determining Total Image Unsharpness in Radiology E2003-10 - Standard Practice for Fabrication of the Neutron Radiographic Beam Purity Indicators E2007-10 - Standard Guide for Computed Radiography E2014-11 - Standard Guide on Metallographic Laboratory Safety E2015-04(2009) - Standard Guide for Preparation of Plastics and Polymeric Specimens for Microstructural Examination E2023-10 - Standard Practice for Fabrication of Neutron Radiographic Sensitivity Indicators E2024/E2024M-11 - Standard Practice for Atmospheric Leaks Using a Thermal Conductivity Leak Detector E2027-09 - Standard Practice for Conducting Proficiency Tests in the Chemical Analysis of Metals, Ores, and Related Materials E2028-99(2005) - Standard Practice for Receiving, Testing and Reporting Results of Investigation of Metal, Ore, or Metal Related Samples that Are or May Be Involved in Litigation E2033-99(2006) - Standard Practice for Computed Radiology (Photostimulable Luminescence Method) E2050-99(2004) - Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion-Infrared Absorption Method E2056-04(2010) - Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures E2066-00(2007) - Standard Guide for Validation of Laboratory Information Management Systems E2075/E2075M-10 - Standard Practice for Verifying the Consistency of AE-Sensor Response Using an Acrylic Rod E2076/E2076M-10 - Standard Practice for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission E2077-00(2010) - Standard Specification for Analytical Data Interchange Protocol for Mass Spectrometric Data E2078-00(2010) - Standard Guide for Analytical Data Interchange Protocol for Mass Spectrometric Data E2093-05 - Standard Guide for Optimizing, Controlling and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization E2096/E2096M-10 - Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing E2104-09 - Standard Practice for Radiographic Examination of Advanced Aero and Turbine Materials and Components E2105-00(2010) - Standard Practice for General Techniques of Thermogravimetric Analysis (TGA) Coupled With Infrared Analysis (TGA/IR) E2105-RUS-00(2010) - Стандартная общая методика термогравиметрического анализа (ТГА), совмещенного с инфракрасным анализом (ТГА/ИК) E2106-00(2011) - Standard Practice for General Techniques of Liquid Chromatography-Infrared (LC/IR) and Size Exclusion Chromatography-Infrared (SEC/IR) Analyses E2108-10 - Standard Practice for Calibration of the Electron Binding-Energy Scale of an X-Ray Photoelectron Spectrometer E2109-01(2007) - Test Methods for Determining Area Percentage Porosity in Thermal Sprayed Coatings E2142-08 - Standard Test Methods for Rating and Classifying Inclusions in Steel Using the Scanning Electron Microscope E2143-01(2006)e1 - Standard Practice for Using Field-Portable Fiber Optics Synchronous Fluorescence Spectrometer for Quantification of Field Samples for Aromatic and Polycyclic Aromatic Hydrocarbons E2191/E2191M-10 - Standard Practice for Examination of Gas-Filled Filament-Wound Composite Pressure Vessels Using Acoustic Emission E2192-08 - Standard Guide for Planar Flaw Height Sizing by Ultrasonics E2207-08 - Standard Practice for Strain-Controlled Axial-Torsional Fatigue Testing with Thin-Walled Tubular Specimens E2208-02(2010)e1 - Standard Guide for Evaluating Non-Contacting Optical Strain Measurement Systems E2209-02(2006)e2 - Standard Test Method for Analysis of High Manganese Steel Using Atomic Emission Spectrometry E2218-02(2008) - Standard Test Method for Determining Forming Limit Curves E2223-07 - Standard Practice for Examination of Seamless, Gas-Filled, Steel Pressure Vessels Using Angle Beam Ultrasonics E2242-07 - Standard Test Method for Column Percolation Extraction of Mine Rock by the Meteoric Water Mobility Procedure E2244-11 - Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer E2245-11 - Standard Test Method for Residual Strain Measurements of Thin, Reflecting Films Using an Optical Interferometer E2246-11 - Standard Test Method for Strain Gradient Measurements of Thin, Reflecting Films Using an Optical Interferometer E2248-09 - Standard Test Method for Impact Testing of Miniaturized Charpy V-Notch Specimens E2261-07 - Standard Practice for Examination of Welds Using the Alternating Current Field Measurement Technique E2283-08 - Standard Practice for Extreme Value Analysis of Nonmetallic Inclusions in Steel and Other Microstructural Features E2293-03(2008)e1 - Standard Practice for Drying of Metal Bearing Ores, Concentrates and Related Metallurgical Materials for the Determination of Mercury E2294-03(2008)e1 - Standard Practice for Proof Silver Corrections in Metal Bearing Ores, Concentrates and Related Materials by Fire Assay Gravimetry E2295-03(2008)e1 - Standard Practice for Fire Assay Silver Corrections in Analysis of Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Silver Determination in Slags and Cupels E2296-03(2008)e1 - Standard Practice for Silver Corrections in Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Fire Assay Slag Recycling and Cupel Proof Gravimetry E2297-04(2010) - Standard Guide for Use of UV-A and Visible Light Sources and Meters used in the Liquid Penetrant and Magnetic Particle Methods E2298-09 - Standard Test Method for Instrumented Impact Testing of Metallic Materials E2309/E2309M-05(2011)e1 - Standard Practices for Verification of Displacement Measuring Systems and Devices Used in Material Testing Machines E2310-04(2009) - Standard Guide for Use of Spectral Searching by Curve Matching Algorithms with Data Recorded Using Mid-Infrared Spectroscopy E2337/E2337M-10 - Standard Guide for Mutual Inductance Bridge Applications for Wall Thickness Determinations in Boiler Tubing E2338-11 - Standard Practice for Characterization of Coatings Using Conformable Eddy-Current Sensors without Coating Reference Standards E2339-11 - Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) E2368-10 - Standard Practice for Strain Controlled Thermomechanical Fatigue Testing E2371-04 - Standard Test Method for Analysis of Titanium and Titanium Alloys by Atomic Emission Plasma Spectrometry E2373-09 - Standard Practice for Use of the Ultrasonic Time of Flight Diffraction (TOFD) Technique E2374-10 - Standard Guide for Acoustic Emission System Performance Verification E2375-08 - Standard Practice for Ultrasonic Testing of Wrought Products E2382-04 - Guide to Scanner and Tip Related Artifacts in Scanning Tunneling Microscopy and Atomic Force Microscopy E2422-11 - Standard Digital Reference Images for Inspection of Aluminum Castings E2426-10 - Standard Practice for Pulse Counting System Dead Time Determination by Measuring Isotopic Ratios with SIMS E2428-08 - Standard Practice for Calibration of Torque-Measuring Instruments for Verifying the Torque Indication of Torque Testing Machines E2437-05 - Standard Practice for Designing and Validating Performance-Based Test Methods for the Analysis of Metals, Ores, and Related Materials E2438-05 - Standard Practice for Implementing Standard Performance Based Test Methods for the Analysis of Metals, Ores, and Related Materials E2443-05(2010)e1 - Standard Guide for Verifying Computer-Generated Test Results Through The Use Of Standard Data Sets E2444-11 - Terminology Relating to Measurements Taken on Thin, Reflecting Films E2445-05(2010) - Standard Practice for Qualification and Long-Term Stability of Computed Radiology Systems E2446-05(2010) - Standard Practice for Classification of Computed Radiology Systems E2448-11 - Standard Test Method for Determining the Superplastic Properties of Metallic Sheet Materials E2465-11e1 - Standard Test Method for Analysis of Ni-Base Alloys by Wavelength Dispersive X-Ray Fluorescence Spectrometry E2472-06e1 - Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions E2478-11 - Standard Practice for Determining Damage-Based Design Stress for Glass Fiber Reinforced Plastic (GFRP) Materials Using Acoustic Emission E2479-11 - Standard Practice for Measuring the Ultrasonic Velocity in Polyethylene Tank Walls Using Lateral Longitudinal (LCR) Waves E2491-08 - Standard Guide for Evaluating Performance Characteristics of Phased-Array Ultrasonic Testing Instruments and Systems E2492-07 - Standard Test Method for Evaluating Springback of Sheet Metal Using the Demeri Split Ring Test E2529-06 - Standard Guide for Testing the Resolution of a Raman Spectrometer E2530-06 - Standard Practice for Calibrating the Z-Magnification of an Atomic Force Microscope at Subnanometer Displacement Levels Using Si(111) Monatomic Steps E2533-09 - Standard Guide for Nondestructive Testing of Polymer Matrix Composites Used in Aerospace Applications E2534-10 - Standard Practice for Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts E2546-07 - Standard Practice for Instrumented Indentation Testing E2567-11 - Standard Test Method for Determining Nodularity And Nodule Count In Ductile Iron Using Image Analysis E2575-08 - Standard Test Method for Determination of Oxygen in Copper and Copper Alloys E2580-07 - Standard Practice for Ultrasonic Testing of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications E2581-07 - Standard Practice for Shearography of Polymer Matrix Composites, Sandwich Core Materials and Filament-Wound Pressure Vessels in Aerospace Applications E2582-07 - Standard Practice for Infrared Flash Thermography of Composite Panels and Repair Patches Used in Aerospace Applications E2594-09 - Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Method) E2597-07e1 - Standard Practice for Manufacturing Characterization of Digital Detector Arrays E2598-07 - Standard Practice for Acoustic Emission Examination of Cast Iron Yankee and Steam Heated Paper Dryers E2617-10 - Standard Practice for Validation of Empirically Derived Multivariate Calibrations E2624-09 - Standard Practice for Torque Calibration of Testing Machines and Devices E2626-08e1 - Standard Guide for Spectrometric Analysis of Reactive and Refractory Metals E2627-10 - Standard Practice for Determining Average Grain Size Using Electron Backscatter Diffraction (EBSD) in Fully Recrystallized Polycrystalline Materials E2642-09 - Standard Terminology for Scientific Charge-Coupled Device (CCD) Detectors E2658-11 - Standard Practices for Verification of Speed for Material Testing Machines E2660-11 - Standard Digital Reference Images for Investment Steel Castings for Aerospace Applications E2661/E2661M-10 - Standard Practice for Acoustic Emission Examination of Plate-like and Flat Panel Composite Structures Used in Aerospace Applications E2662-09 - Standard Practice for Radiologic Examination of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications E2663-11 - Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Ultrasonic Test Methods E2669-11 - Standard Digital Reference Images for Titanium Castings E2695-09 - Standard Guide for Interpretation of Mass Spectral Data Acquired with Time-of-Flight Secondary Ion Mass Spectroscopy E2698-10 - Standard Practice for Radiological Examination Using Digital Detector Arrays E2699-11 - Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Digital Radiographic (DR) Test Methods E2700-09 - Standard Practice for Contact Ultrasonic Testing of Welds Using Phased Arrays E2712-09e1 - Standard Test Methods for Forming Superplastic Metallic Sheet E2714-09e1 - Standard Test Method for Creep-Fatigue Testing E2719-09 - Standard Guide for Fluorescence—Instrument Calibration and Qualification E2734/E2734M-10 - Standard Specification for Dimensions of Knife-Edge Flanges E2736-10 - Standard Guide for Digital Detector Array Radiology E2737-10 - Standard Practice for Digital Detector Array Performance Evaluation and Long-Term Stability E2738-11 - Standard Practice for Digital Imaging and Communication Nondestructive Evaluation (DICONDE) for Computed Radiography (CR) Test Methods E2760-10e1 - Standard Test Method for Creep-Fatigue Crack Growth Testing E2767-11 - Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for X-ray Computed Tomography (CT) Test Methods E2775-11 - Standard Practice for Guided Wave Testing of Above Ground Steel Pipework Using Piezoelectric Effect Transduction E2789-10 - Standard Guide for Fretting Fatigue Testing E2792-11 - Standard Test Method for Determination of Hydrogen in Aluminum and Aluminum Alloys by Inert Gas Fusion E2818-11 - Standard Practice for Determination of Quasistatic Fracture Toughness of Welds E2823-11 - Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Mass Spectrometry (Performance-Based Method) E2824-11 - Standard Test Method for Determination of Beryllium in Copper-Beryllium Alloys by Phosphate Gravimetric Method E2857-11 - Standard Guide for Validating Analytical Methods E2861-11 - Standard Test Method for Measurement of Beam Divergence and Alignment in Neutron Radiologic Beams E2863-11 - Standard Practice for Acoustic Emission Examination of Welded Steel Sphere Pressure Vessels Using Thermal Pressurization G1-03 - Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens G3-89(2010) - Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing G4-01(2008) - Standard Guide for Conducting Corrosion Tests in Field Applications G5-94(2004) - Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements G16-95(2010) - Standard Guide for Applying Statistics to Analysis of Corrosion Data G28-02(2008) - Standard Test Methods for Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys G28-RUS-02(2008) - Стандартные методы определения восприимчивости к межкристаллитной коррозии деформируемых хромсодержащих сплавов, обогащенных никелем G30-97(2009) - Standard Practice for Making and Using U-Bend Stress-Corrosion Test Specimens G32-10 - Standard Test Method for Cavitation Erosion Using Vibratory Apparatus G33-99(2010) - Standard Practice for Recording Data from Atmospheric Corrosion Tests of Metallic-Coated Steel Specimens G34-01(2007) - Standard Test Method for Exfoliation Corrosion Susceptibility in 2XXX and 7XXX Series Aluminum Alloys (EXCO Test) G35-98(2010) - Standard Practice for Determining the Susceptibility of Stainless Steels and Related Nickel-Chromium-Iron Alloys to Stress-Corrosion Cracking in Polythionic Acids G36-94(2006) - Standard Practice for Evaluating Stress-Corrosion-Cracking Resistance of Metals and Alloys in a Boiling Magnesium Chloride Solution G37-98(2011) - Standard Practice for Use of Mattsson's Solution of pH 7.2 to Evaluate the Stress- Corrosion Cracking Susceptibility of Copper-Zinc Alloys G38-01(2007) - Standard Practice for Making and Using C-Ring Stress-Corrosion Test Specimens G39-99(2011) - Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens G40-10b - Standard Terminology Relating to Wear and Erosion G41-90(2006) - Standard Practice for Determining Cracking Susceptibility of Metals Exposed Under Stress to a Hot Salt Environment G44-99(2005) - Standard Practice for Exposure of Metals and Alloys by Alternate Immersion in Neutral 3.5% Sodium Chloride Solution G46-94(2005) - Standard Guide for Examination and Evaluation of Pitting Corrosion G47-98(2011) - Standard Test Method for Determining Susceptibility to Stress-Corrosion Cracking of 2XXX and 7XXX Aluminum Alloy Products G48-11 - : Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution G49-85(2011) - Standard Practice for Preparation and Use of Direct Tension Stress-Corrosion Test Specimens G50-10 - Standard Practice for Conducting Atmospheric Corrosion Tests on Metals G51-95(2005) - Standard Test Method for Measuring pH of Soil for Use in Corrosion Testing G52-00(2011) - Standard Practice for Exposing and Evaluating Metals and Alloys in Surface Seawater G56-10 - Standard Test Method for Abrasiveness of Ink-Impregnated Fabric Printer Ribbons and Other Web Materials G57-06 - Standard Test Method for Field Measurement of Soil Resistivity Using the Wenner Four-Electrode Method G58-85(2011) - Standard Practice for Preparation of Stress-Corrosion Test Specimens for Weldments G59-97(2009) - Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements G60-01(2007) - Standard Practice for Conducting Cyclic Humidity Exposures G61-86(2009) - Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys G64-99(2005) - Standard Classification of Resistance to Stress-Corrosion Cracking of Heat-Treatable Aluminum Alloys G65-04(2010) - Standard Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus G66-99(2005)e1 - Standard Test Method for Visual Assessment of Exfoliation Corrosion Susceptibility of 5XXX Series Aluminum Alloys (ASSET Test) G67-04 - Standard Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by Mass Loss After Exposure to Nitric Acid (NAMLT Test) G69-97(2009) - Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys G71-81(2009) - Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes G73-10 - Standard Test Method for Liquid Impingement Erosion Using Rotating Apparatus G75-07 - Standard Test Method for Determination of Slurry Abrasivity (Miller Number) and Slurry Abrasion Response of Materials (SAR Number) G76-07 - Standard Test Method for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets G77-05(2010) - Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test G78-01(2007) - Standard Guide for Crevice Corrosion Testing of Iron-Base and Nickel-Base Stainless Alloys in Seawater and Other Chloride-Containing Aqueous Environments G81-97a(2007) - Standard Test Method for Jaw Crusher Gouging Abrasion Test G82-98(2009) - Standard Guide for Development and Use of a Galvanic Series for Predicting Galvanic Corrosion Performance G84-89(2005) - Standard Practice for Measurement of Time-of-Wetness on Surfaces Exposed to Wetting Conditions as in Atmospheric Corrosion Testing G85-11 - Standard Practice for Modified Salt Spray (Fog) Testing G87-02(2007) - Standard Practice for Conducting Moist SO2 Tests G91-11 - Standard Practice for Monitoring Atmospheric SO2 Deposition Rate for Atmospheric Corrosivity Evaluation G92-86(2010) - Standard Practice for Characterization of Atmospheric Test Sites G96-90(2008) - Standard Guide for Online Monitoring of Corrosion in Plant Equipment (Electrical and Electrochemical Methods) G97-97(2007) - Standard Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications G98-02(2009) - Standard Test Method for Galling Resistance of Materials G99-05(2010) - Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus G100-89(2010)e1 - Standard Test Method for Conducting Cyclic Galvanostaircase Polarization G101-04(2010) - Standard Guide for Estimating the Atmospheric Corrosion Resistance of Low-Alloy Steels G102-89(2010) - Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements G103-97(2011) - Standard Practice for Evaluating Stress-Corrosion Cracking Resistance of Low Copper 7XXX Series Al-Zn-Mg-Cu Alloys in Boiling 6% Sodium Chloride Solution G105-02(2007) - Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests G106-89(2010) - Standard Practice for Verification of Algorithm and Equipment for Electrochemical Impedance Measurements G107-95(2008) - Standard Guide for Formats for Collection and Compilation of Corrosion Data for Metals for Computerized Database Input G108-94(2010) - Standard Test Method for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels G109-07 - Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments G110-92(2009) - Standard Practice for Evaluating Intergranular Corrosion Resistance of Heat Treatable Aluminum Alloys by Immersion in Sodium Chloride + Hydrogen Peroxide Solution G111-97(2006) - Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both G112-92(2009) - Standard Guide for Conducting Exfoliation Corrosion Tests in Aluminum Alloys G115-10 - Standard Guide for Measuring and Reporting Friction Coefficients G116-99(2010) - Standard Practice for Conducting Wire-on-Bolt Test for Atmospheric Galvanic Corrosion G117-02(2007) - Standard Guide for Calculating and Reporting Measures of Precision Using Data from Interlaboratory Wear or Erosion Tests G118-02(2007) - Standard Guide for Recommended Format of Wear Test Data Suitable for Databases G119-09 - Standard Guide for Determining Synergism Between Wear and Corrosion G123-00(2011) - Standard Test Method for Evaluating Stress-Corrosion Cracking of Stainless Alloys with Different Nickel Content in Boiling Acidified Sodium Chloride Solution G129-00(2006) - Standard Practice for Slow Strain Rate Testing to Evaluate the Susceptibility of Metallic Materials to Environmentally Assisted Cracking G132-96(2007) - Standard Test Method for Pin Abrasion Testing G133-05(2010) - Standard Test Method for Linearly Reciprocating Ball-on-Flat Sliding Wear G134-95(2010)e1 - Standard Test Method for Erosion of Solid Materials by a Cavitating Liquid Jet G135-95(2007) - Standard Guide for Computerized Exchange of Corrosion Data for Metals G137-97(2009) - Standard Test Method for Ranking Resistance of Plastic Materials to Sliding Wear Using a Block-On-Ring Configuration G139-05(2011) - Standard Test Method for Determining Stress-Corrosion Cracking Resistance of Heat-Treatable Aluminum Alloy Products Using Breaking Load Method G140-02(2008) - Standard Test Method for Determining Atmospheric Chloride Deposition Rate by Wet Candle Method G142-98(2011) - Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both G143-03(2009) - Standard Test Method for Measurement of Web/Roller Friction Characteristics G146-01(2007) - Standard Practice for Evaluation of Disbonding of Bimetallic Stainless Alloy/Steel Plate for Use in High-Pressure, High-Temperature Refinery Hydrogen Service G148-97(2011) - Standard Practice for Evaluation of Hydrogen Uptake, Permeation, and Transport in Metals by an Electrochemical Technique G150-99(2010) - Standard Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels G157-98(2005) - Standard Guide for Evaluating the Corrosion Properties of Wrought Iron- and Nickel-Based Corrosion Resistant Alloys for the Chemical Process Industries G158-98(2010) - Standard Guide for Three Methods of Assessing Buried Steel Tanks G161-00(2006) - Standard Guide for Corrosion-Related Failure Analysis G162-99(2010) - Standard Practice for Conducting and Evaluating Laboratory Corrosions Tests in Soils G163-10 - Standard Guide for Digital Data Acquisition in Wear and Friction Measurements G164-99(2009) - Standard Test Method for Determination of Surface Lubrication on Flexible Webs G165-99(2005) - Standard Practice for Determining Rail-to-Earth Resistance G168-00(2006) - Standard Practice for Making and Using Precracked Double Beam Stress Corrosion Specimens G170-06 - Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory G171-03(2009)e2 - Standard Test Method for Scratch Hardness of Materials Using a Diamond Stylus G174-04(2009)e1 - Standard Test Method for Measuring Abrasion Resistance of Materials by Abrasive Loop Contact G176-03(2009) - Standard Test Method for Ranking Resistance of Plastics to Sliding Wear using Block-on-Ring Wear Test—Cumulative Wear Method G180-07 - Standard Test Method for Initial Screening of Corrosion Inhibiting Admixtures for Steel in Concrete G181-11 - Standard Test Method for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions G182-06 - Standard Test Method for Determination of the Breakaway Friction Characteristics of Rolling Element Bearings G184-06 - Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using Rotating Cage G185-06 - Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating Cylinder Electrode G186-05(2011) - Standard Test Method for Determining Whether Gas-Leak-Detector Fluid Solutions Can Cause Stress Corrosion Cracking of Brass Alloys G187-05 - Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method G188-05(2011) - Standard Specification for Leak Detector Solutions Intended for Use on Brasses and Other Copper Alloys G189-07 - Standard Guide for Laboratory Simulation of Corrosion Under Insulation G190-06 - Standard Guide for Developing and Selecting Wear Tests G192-08 - Standard Test Method for Determining the Crevice Repassivation Potential of Corrosion-Resistant Alloys Using a Potentiodynamic-Galvanostatic-Potentiostatic Technique G194-08 - Standard Test Method for Measuring Rolling Friction Characteristics of a Spherical Shape on a Flat Horizontal Plane G195-08 - Standard Guide for Conducting Wear Tests Using a Rotary Platform, Double-Head Abraser G196-08 - Standard Test Method for Galling Resistance of Material Couples G198-11 - Standard Test Method for Determining the Relative Corrosion Performance of Driven Fasteners in Contact with Treated Wood G199-09 - Standard Guide for Electrochemical Noise Measurement G200-09 - Standard Test Method for Measurement of Oxidation-Reduction Potential (ORP) of Soil G202-09 - Standard Test Method for Using Atmospheric Pressure Rotating Cage G203-10 - Standard Guide for Determining Friction Energy Dissipation in Reciprocating Tribosystems G204-10 - Standard Test Method for Damage to Contacting Solid Surfaces under Fretting Conditions G205-10 - Standard Guide for Determining Corrosivity of Crude Oils G206-11 - Standard Guide for Measuring the Wear Volumes of Piston Ring Segments Run against Flat Coupons in Reciprocating Wear Tests | ||