SEDL / Topics / Metals Test Methods and Analytical Procedures / Recently Published

Special Technical Publications (STPs)

• STP1563 Tribo-Corrosion: Research, Testing, and Applications
• STP1546 Fatigue and Fracture Mechanics: 38th Volume
• STP1539 Creep-Fatigue Interactions: Test Methods and Models
• STP1526 Fatigue and Fracture Mechanics: 37th Volume
• STP1515 Fatigue and Fracture of Medical Metallic Materials and Devices: 2nd Volume
• View Most Recent 25 STPs      View All STPs

Manuals (MNLs)

• DS71 ISOCORRAG International Atmospheric Exposure Program: Summary of Results
• MNL46 Metallographic and Materialographic Specimen Preparation, Light Microscopy, Image Analysis and Hardness Testing
• MNL56 Guide to Friction, Wear, and Erosion Testing
• MNL20-2ND Corrosion Tests and Standards: Application and Interpretation-Second Edition
• MNL52 An Introduction to the Development and Use of the Master Curve Method
• View Most Recent 25 Manuals      View All Manuals

Journal of ASTM International (JAI)

• Fatigue Sensitivity to Small Defects of a Gamma–Titanium–Aluminide Alloy
• Statistical Comparison of Analysis Results for Lead on Dust Wipe Samples by X-ray Fluorescence Analysis and Flame Atomic Absorption Spectrometry
• Estimation of Corrosion Fatigue-Crack Growth through Frequency Shedding Method
• Study of an On-Line Crack Compliance Technique for Residual Stress Measurement Using 2D Finite Element Simulations of Fatigue Crack Growth
• Methods to Increase the Fatigue Life of Friction Stir Lap Welds in No-load Transfer Coupons Using a Retractable Pin Tool
• View Most Recent 25 JAI papers      View All JAI papers

Geotechnical Testing Journal (GTJ)

• The Rotating Erosion Testing Apparatus (RETA): A Laboratory Device for Measuring Erosion Rates versus Shear Stresses of Rock and Cohesive Materials
• A Comparison of Density-Based and Modulus-Based In Situ Test Measurements for Compaction Control
• Triaxial Testing of Soft Rocks
• Electrical Resistivity Tomography in Cylindrical Cells—Guidelines for Hardware Pre-Design
• Design of a Robot and Test Procedure for the Dynamic Testing of Anchorages in a Geotechnical Centrifuge
• View Most Recent 25 GTJ papers      View All GTJ papers

Journal of Testing and Evaluation (JTE)

• Time Domain Microwave Imaging of a Buried Homogeneous Dielectric Cylinder in a Slab Medium by Asynchronous Particle Swarm Optimization
• Method for Assessing Applicability of an Artificial Flaw as a Small Initial Crack for Fatigue Limit Evaluation and Its Application to a Drill Hole and an FIB Processed Sharp Notch in Annealed 0.45% Carbon Steel
• Computation and Uncertainty Evaluation of Offset Yield Strength
• Effect of Electrical Discharge Machining (EDM) on Charpy Test Results from Miniaturized Steel Specimens
• An Investigation of Hydrogen Environment Effect on the Strain Aging of Low-Carbon Steel through Vickers Hardness Test
• View Most Recent 25 JTE papers      View All JTE papers