|
|
|
Digital Library / Topics / Petroleum Products, Lubricants, and Fossil Fuels / Combustion Characteristics; Manufactured Carbon and Graphite Products; Catalysts / All STP
- STP1489
Oxidation and the Testing of Turbine Oils
- STP1501
Automotive Lubricant Testing and Advanced Additive Development
- STP1468
Elemental Analysis of Fuels and Lubricants: Recent Advances and Future Prospects
- STP1339
Hydraulic Failure Analysis: Fluids, Components, and System Effects
- STP1404
Bench Testing of Industrial Fluid Lubrication and Wear Properties Used in Machinery Applications
- STP1407
Turbine Lubrication in the 21st Century
- STP1388
Oil Flow Studies at Low Temperatures in Modern Engines
- STP1310
Tribology of Hydraulic Pump Testing
- STP1284
Fire Resistance of Industrial Fluids
- STP1160
The Impact of U.S. Environmental Regulations on Fuel Quality
- STP315I
Multicylinder Test Sequences for Evaluating Automotive Engine Oils: Sequence IID, Tenth Edition
- STP1138
Aviation Fuel: Thermal Stability Requirements
- STP1143
Low Temperature Lubricant Rheology Measurement and Relevance to Engine Operation
- STP1109
Modern Instrumental Methods of Elemental Analysis of Petroleum Products and Lubricants
- STP1019
Novel Techniques in Fossil Fuel Mass Spectrometry
- STP1021
Turbine Oil Monitoring
- STP1048
Future Fuels for General Aviation
- STP1068
High-Temperature, High-Shear Oil Viscosity: Measurement and Relationship to Engine Operation
- STP1005
Distillate Fuel: Contamination, Storage, and Handling
- STP512A
Laboratory Performance Tests for Automotive Gear Lubricants Intended for API GL-5 Service
- STP902
Mass Spectrometric Characterization of Shale Oils
- STP916
Aspects of Lubricant Oxidation
- STP878
Marine Fuels
- STP315H3S
Multicylinder Test Sequences for Evaluating Automotive Engine Oils: Part 3: Sequence V-D
- STP809
Stationary Gas Turbine Alternative Fuels
- STP751
Distillate Fuel Stability and Cleanliness
- STP315H1S
Multicylinder Test Sequences for Evaluating Automotive Engine Oils: Part1: Sequence IID
- STP315H1S
Multicylinder Test Sequences for Evaluating Automotive Engine Oils: Part 1: Sequence IID
- STP315H2S
Multicylinder Test Sequences for Evaluating Automotive Engine Oils: Part 2: Sequence 111D
- STP509A4B
Single Cylinder Engine Tests for Evaluating the Performance of Crankcase Lubricants: Part IV: Labeco L-38 Test Method
- STP621_S4
The Relationship Between Engine Oil Viscosity and Engine PerformancePart V and Part VI
- STP509A1B
Single Cylinder Engine Tests for Evaluating the Performance of Crankcase Lubricants: Part I : Caterpillar IG2 Test Method
- STP509A2B
Single Cylinder Engine Tests for Evaluating the Performance of Crankcase Lubricants: Part II: Caterpillar IH2 Test Method
- STP688
Factors in Using Kerosine Jet Fuel of Reduced Flash Point
- STP621_S3
The Relationship Between Engine Oil Viscosity and Engine PerformancePart IV
- STP315G
Multicylinder Test Sequences for Evaluating Automotive Engine Oils
- STP621
The Relationship Between Engine Oil Viscosity and Engine Performance
- STP621_S1
The Relationship Between Engine Oil Viscosity and Engine Performance: Part II
- STP7C
Significance of Tests for Petroleum Products
- STP577
Calculation of Physical Properties of Petroleum Products from Gas Chromatographic Analyses
- STP510A
Automotive Gasoline Performance and Information System
- STP525
LP-Gas Engine Fuels
- STP531
Manual on Requirements, Handling, and Quality Control of Gas Turbine Fuel
- STP43C
ASTM Viscosity Tables for Kinematic Viscosity Conversions and Viscosity Index Calculations
- STP509
Single Cylinder Engine Tests for Evaluating the Performance of Crankcase Lubricants (Abridged Procedures)
- STP487
Effect of Automotive Emission Requirements on Gasoline Characteristics
- STP491
Hydraulic System Cleanliness
- STP332A
Manual on Hydrocarbon Analysis, Second Edition1968
- STP406
Fire Resistance of Hydraulic Fluids
- STP168
ASTM Viscosity Index Calculated from Kinematic Viscosity
- STP382
The Effects of Polymer Degradation on Flow Properties of Fluids and Lubricants Containing Polymers
- STP109A
Physical Constants of Hydrocarbons C to C
- STP334
Symposium on Lubricants for Automotive Equipment
- STP299
Symposium on Non-Newtonian Viscometry
- STP321
Symposium on Turbine Oils (1962)
- STP244
Symposium on Stability of Distillate Fuel Oils
- STP249
Symposium on Bulk Quantity Measurement
- STP202
Symposium on Vapor Phase Oxidation of Gasoline
- STP7B
Significance of ASTM Tests for Petroleum Products
- STP116
Symposium on Flame Photometry
- STP44
Symposium on New Materials in Transportation
- STP23
Symposium on Industrial Fuels
|