Plastics

    An Experimental Investigation of Factors Considered for the Short Beam Shear Strength Evaluation of Carbon Fiber–reinforced Thermoplastic Laminates

    Thermal Degradation Kinetics of a Linked Polyurethane Acrylate Film

    Investigation of Hygro-Thermal Cycle Effects on the Membranes of Proton Exchange Membrane Fuel Cells

    An Evaluation of the Non-Isothermal and Isothermal Pyrolysis of Polyether Sulfone in Thermogravimetric Analysis

    The Damage Investigation of Wedge-Shaped Electromagnetic Riveting Structure of CFRP/Aluminium Alloy

    Understanding Melt Index and ASTM D1238

    Characterization of Carbon Black Particles Mixing in Polymeric Matrix by Direct Methods

    Characterization of Carbon Black Particles Dispersion in Polymeric Matrix by Indirect Methods

    Spatial Distribution of the Compressive Stress-Strain of Recycled Polymeric Piling

    Validation Through Finite Element Simulation of the Behaviour of a Polyurethane Shock Absorber Under In-Service and Extreme Conditions

    Characterization of Mechanical Properties of a Shock Absorber Polyurethane Foam for Elevators. Numerical Fitting of Mechanical Behavior Models for Hyperelastic and Elastomeric Foam Materials

    Measurement of Strain Distribution and Material Flow in Bulk Deformation by the Screw Method

    Tensile Creep Studies on Filled Polychloroprene Elastomer

    Dynamic Axial Stiffness of Typical Restrained and Unrestrained Underground Pipe Joints

    Long-Term Testing of Trenchless Pipe Liners

    Inverse Equivalent Elastic and Viscoelastic Loading Problems—Analytical and Computational Simulations of Experiments

    Evaluation of the Ignition Susceptibility of Plastics in Nitrogen Trifluoride (NF3) by Autogenous Ignition Testing

    Effect of the Aging of the “Product/Package” System on the Mechanical Properties of Plastic Packaging

    Weathering Effects on the Fracture Properties of Polyvinyl Chloride Pipes

    Characterization of Mechanical Properties in Surface-Treated Materials

    Effect of Austempering Variables on the Quasi-Static and Dynamic Fracture Toughness of Austempered Ductile Iron

    A Method of Finding the Effective Length of the Specimen Used in the Hot Torsion Test and Recommendations on Geometry of the Test Specimen

    Impact Force Comparison of Polymers: Molded-Notch Versus Cut-Notch Using the ASTM D 256 Izod Impact Test Method

    Local Versus Global Strain Measurement of a Polymeric Geogrid

    Effect of Specimen Thickness on the Long-Life Fatigue Performance of a Randomly-Oriented Continuous-Strand Glass-Mat-Reinforced Polypropylene Composite