Digital Library / Topics / Plastics / Plastics / All JTE

• Measurement of Strain Distribution and Material Flow in Bulk Deformation by the Screw Method
• Tensile Creep Studies on Filled Polychloroprene Elastomer
• Inverse Equivalent Elastic and Viscoelastic Loading Problems—Analytical and Computational Simulations of Experiments
• Evaluation of the Ignition Susceptibility of Plastics in Nitrogen Trifluoride (NF³) by Autogenous Ignition Testing
• Effect of the Aging of the “Product/Package” System on the Mechanical Properties of Plastic Packaging
• Weathering Effects on the Fracture Properties of Polyvinyl Chloride Pipes
• Characterization of Mechanical Properties in Surface-Treated Materials
• Effect of Austempering Variables on the Quasi-Static and Dynamic Fracture Toughness of Austempered Ductile Iron
• Impact Force Comparison of Polymers: Molded-Notch Versus Cut-Notch Using the ASTM D 256 Izod Impact Test Method
• A Method of Finding the Effective Length of the Specimen Used in the Hot Torsion Test and Recommendations on Geometry of the Test Specimen
• Local Versus Global Strain Measurement of a Polymeric Geogrid
• Effect of Specimen Thickness on the Long-Life Fatigue Performance of a Randomly-Oriented Continuous-Strand Glass-Mat-Reinforced Polypropylene Composite
• Characterization of Styrene-Butadiene-Styrene Polymer Modified Bitumens—Comparison of Conventional Methods and Dynamic Mechanical Analyses
• Numerical Assessment of the Dynamic Tension Test Using the Split Hopkinson Bar
• The Influence of Test Piece Preparation on the Compressive Strength of Unidirectional Fiber-Reinforced Plastic
• Development of an Improved Compression Specimen Geometry for Unreinforced Polymers
• Application of Surface Fabrication to Strain Measurement in Nanometer Scale with the Scanning Tunneling Microscope
• Constant Temperature-Compensated Strain Rate Testing of Aluminum
• Local Strain in Corrugated Pipe: Experimental Measurements to Test a Numerical Model
• Thermal and Mechanical Properties of Cellular Polystyrene and Polyurethane Insulation Materials Aged on a Flat Roof in Hot-Dry Climate
• Controlling, Data Acquisition, and Data Processing for Axial and Shear Creep Tests Using a Computer
• Data Acquisition and Analysis of Tensile Properties for Metal Matrix Composites
• Dynamic Testing of the Strength of Helmet Chin Straps
• The Vibration-Flex Test Method to Determine the Susceptibility of Plastic Films to Pinhole Formation Due to Flexing
• Effect of Internal Gas Pressure on the Compression Strength of Beverage Cans and Plastic Bottles
• Performance of Hybrid Reinforcements in PVC Composites: Part I—Use of Surface-Modified Mica and Wood Pulp as Reinforcements
• Analysis of Large Diameter High-Density Polyethylene Plastic Pipes As Vertical Shafts in Landfills
• An Assessment of the Effects of Treatment, Time, and Heat on the Removal of Erasable Pen Marks from Cotton and Cotton/Polyester Blend Fabrics
• Glossary (German/English, English/German) of Specialized Plastics Testing Terminology
• The Structural Ceramics Database: Data Acquisition Format for Monolithic Ceramics
• Influence of Test Methodology on Fatigue Crack Propagation in Engineering Plastics
• Flexural and Shear Moduli of Full-Section Fiber Reinforced Plastic (FRP) Pultruded Beams
• Experimental Determination of Hydrostatic Compression versus Volume Change Curves for Cellular Solids
• Strain Measurement Technique for Elevated Temperature Tensile and Creep Testing of Foil-Gage Metals
• Flow of Semi-Solid Foods over Inclined Packaging Surfaces as an Index of Traction
• Improved Impulse-Frequency Response Techniques for Measurement of Dynamic Mechanical Properties of Composite Materials
• Analysis of Service Failures in Thermoplastic Pressure Piping Water Systems
• Evaluation of the Mechanical Behavior of Plain and Spirally Stiffened Polyvinyl Chloride Pipes
• Crack Growth in High-Density Polyethylene Pipes
• A New Test Method for Determining Environmental Stress-Crack Resistance of Ethylene Based Plastics
• Cross-Linking of Polyfluoroolefin Copolymers
• Ethylene-Propylene-Diene Monomer (EPDM) and Fluorocarbon (FKM) Elastomers in the Geothermal Environment
• A Basis for Predicting Longtime Behavior from Short-Time Tests of Geothermal Sealants
• Effect of Weathering at Different Exposure Angles on the Tensile Impact Resistance of Thermoplastics
• Fracture Toughness of Stretched Acrylic Plastic
• The “Instantaneous” Effect of Internal Moisture Conditions on the Strength of Glass-Fiber-Reinforced Plastics
• A New Method of Test for Flexural Fatigue of Plastics
• Delayed Yielding of a Plane Stress Viscoelastic Dugdale Model
• Simulating Rain Impact Damage to Supersonic Missile Radomes
• Environmental Stress Cracking of Thermoplastics: A New Approach to Testing
• Characterization of Polymeric Materials by Dynamic Mechanical Properties
• Screening Test for Torsional Creep Performance of Plastics
• An Extensometer for Circumferential Strains