Petroleum Products, Lubricants, and Fossil Fuels

    Advances in the Understanding of Gelation in the Framework of the Test ASTM D5133

    An Evaluation Model Using Fuzzy TOPSIS and Goal Programming for TQM Consultant Selection

    Coal and Coke Volatile Matter Determination and Reconciliation of Differences in Yields Determined by Two ASTM Methods

    Developing a Project Evaluation and Testing Model to Assess Stable Photovoltaic Slicing Machine

    A Simple Estimator of Errors-in-Variables Model Using Instrumental Errors Ratio

    Aqueous Aluminum Nanofluid Combustion in Diesel Fuel

    Thermal Stability Testing of Refractory Specimen

    Multi-Depth Deflectometer Dynamic Response Measurements under Simulated New Generation Aircraft Gear Loading

    Rapid Determination of Swelling Pressure of Clay Minerals

    Cone Resistance of Compacted Ash Fill

    Improvement of Sulfur Detection Limits in Petroleum Products Using ASTM D 4045

    The Effect of Kinematic Viscosity on the Flash Point of Liquids Determined by ASTM D 93 Procedure A, ASTM D 93 Procedure B, and ASTM D 56

    Reference Verification Fluids for Flash Point Determination

    Color Change as a Predictor of Strength Loss in PFD Cover Fabrics

    Bias Testing: Myths, Misconceptions, and Mistakes

    Scoring of Precision Spur Gears

    Effect of Composition of El-lajjun Oil Shale on Its Calorific Value

    Laboratory Testing Procedure for Evaluation of Moving Bed Catalyst Attribution

    Analysis of Jet Fuel Thermal Oxidation Deposits by Spectral Fluorometric Technique

    Development of Analytical Methodology and a Report on Collaborative Study on the Determination of Morpholine, Cyclohexylamine, and Diethylaminoethanol in Aqueous Samples by Direct Aqueous Injection Gas Chromatography

    Cetane Number of Small Samples by Engine Throttling: Reliability Comparison with Standard Cooperative Fuels Research Method

    Preface to “Dynamic Young's Modulus Measurements in Metallic Materials: Results of an Interlaboratory Testing Program”

    Dynamic Young's Modulus Measurements in Metallic Materials: Results of an Interlaboratory Testing Program

    Sampling Techniques Applicable to Petroleum Coke

    A Review of Petroleum Coke Preparation Procedures

    Sampling Variance: Bias and Reproducibility

    An Experimental Technique for Studying the Dynamic Stability of Slurry Fuels

    Piston Ring Deposits When Using Vegetable Oil as a Fuel

    Variances in Sampling Streams of Coal

    Gas Analysis Techniques for High Temperature Corrosion Testing

    Low Temperature (650 to 700°C) Burner Rig Testing

    Erosion Response of a Turbine Alloy and Its Oxide Scale

    A Critical Evaluation of Pulse Collectors for Utilities

    Error Analysis of Intrinsic Viscosity Measurements

    High-Speed Sampling Cutters and Their Effect on Bias

    A Rolling Bottle Device for Measuring the Flow of Liquids and Powders

    Procedures for the Reduction and Testing of Bias

    Evaluation of Filter/Separators and Centrifuges for Effects on Properties of Steam Turbine Lubricating Oils

    Latitudes of Viscosity Index Values

    Detection of Chrysotile Asbestos in Airborne Dust from Thermosetting Resin Grinding

    Computational Aids for Kinematic Viscosity Conversions from 100 to 210°F to 40 and 100°C

    The Calculation of Gas Transmission Rates Measured by Manometric Methods

    Modified Centrifuge Technique for Hydrolytic Stability of Neopentyl Polyol Ester Lubricants

    Stabilized Low Molecular Weight Wax Crystals

    Determination of Trace Amounts of Sediment in Gas-Oil

    Atomic Absorption Analysis of Portland Cement and Raw Mix Using a Lithium Metaborate Fusion

    Four Aspects of Sheet Metal Formability and Their Assessment