Digital Library / Topics / Petroleum Products, Lubricants, and Fossil Fuels / Petroleum Products and Lubricants / All JTE

• Aqueous Aluminum Nanofluid Combustion in Diesel Fuel
• Thermal Stability Testing of Refractory Specimen
• Multi-Depth Deflectometer Dynamic Response Measurements under Simulated New Generation Aircraft Gear Loading
• Improvement of Sulfur Detection Limits in Petroleum Products Using ASTM D 4045
• The Effect of Kinematic Viscosity on the Flash Point of Liquids Determined by ASTM D 93 Procedure A, ASTM D 93 Procedure B, and ASTM D 56
• Reference Verification Fluids for Flash Point Determination
• Color Change as a Predictor of Strength Loss in PFD Cover Fabrics
• Scoring of Precision Spur Gears
• Effect of Composition of El-lajjun Oil Shale on Its Calorific Value
• Analysis of Jet Fuel Thermal Oxidation Deposits by Spectral Fluorometric Technique
• Development of Analytical Methodology and a Report on Collaborative Study on the Determination of Morpholine, Cyclohexylamine, and Diethylaminoethanol in Aqueous Samples by Direct Aqueous Injection Gas Chromatography
• Cetane Number of Small Samples by Engine Throttling: Reliability Comparison with Standard Cooperative Fuels Research Method
• Preface to “Dynamic Young's Modulus Measurements in Metallic Materials: Results of an Interlaboratory Testing Program”
• Dynamic Young's Modulus Measurements in Metallic Materials: Results of an Interlaboratory Testing Program
• Sampling Techniques Applicable to Petroleum Coke
• A Review of Petroleum Coke Preparation Procedures
• An Experimental Technique for Studying the Dynamic Stability of Slurry Fuels
• Piston Ring Deposits When Using Vegetable Oil as a Fuel
• Gas Analysis Techniques for High Temperature Corrosion Testing
• Low Temperature (650 to 700°C) Burner Rig Testing
• Erosion Response of a Turbine Alloy and Its Oxide Scale
• Error Analysis of Intrinsic Viscosity Measurements
• A Rolling Bottle Device for Measuring the Flow of Liquids and Powders
• Evaluation of Filter/Separators and Centrifuges for Effects on Properties of Steam Turbine Lubricating Oils
• Latitudes of Viscosity Index Values
• Computational Aids for Kinematic Viscosity Conversions from 100 to 210°F to 40 and 100°C
• The Calculation of Gas Transmission Rates Measured by Manometric Methods
• Modified Centrifuge Technique for Hydrolytic Stability of Neopentyl Polyol Ester Lubricants
• Stabilized Low Molecular Weight Wax Crystals
• Determination of Trace Amounts of Sediment in Gas-Oil
• Atomic Absorption Analysis of Portland Cement and Raw Mix Using a Lithium Metaborate Fusion
• Four Aspects of Sheet Metal Formability and Their Assessment