Digital Library / Topics / Construction / Wood / Recent 25 JTE

• Computational Modeling of the Lateral Load Transfer Capacity of Rimboard
• Sawblade Vibration Mode Shape Measurement Using ESPI
• Boundary Condition Role in Tests of Wood Compression Webs
• Towards the Development of Accelerated Methods for Assessing the Durability of Wood Plastic Composites
• The Formation Mechanism of the Factory-Roof Pattern in a Torsional Fatigue Specimen with Circumferential Notch
• Modeling and Calibration of a Laminating Press Prototype for Fiber-Reinforced Polymer-Glulam Billets
• Performance-Based Material Evaluation of Fiber-Reinforced Polymer-Wood Interfaces in Reinforced Glulam Members
• Small-Scale Modeling of Metal-Plate-Connected Wood Truss Joints
• Shear Strength of Structural Composite Lumber Using Torsion Tests
• Shear Stress/Shear Strain Relation of Wood Obtained by Asymmetric Four-Point Bending Test of Side-Tapered Specimen
• Evaluation of a Boron-Nitrogen, Phosphate-Free Fire-Retardant Treatment. Part III. Evaluation of Full-Size 2 by 4 Lumber per ASTM Standard D 5664-95 Method C
• Evaluation of a Boron-Nitrogen, Phosphate-Free Fire-Retardant Treatment. Part II. Testing of Small Clear Specimens per ASTM Standard D 5664-95, Methods A and B
• Evaluation of a Boron-Nitrogen, Phosphate-Free Fire-Retardant Treatment. Part I. Testing of Douglas-Fir Plywood per ASTM Standard D 5516-96
• Experimental Analysis of Multiple Staple Joints in Selected Wood and Wood-Based Materials
• Finite-Element Analysis of the Stress Distribution in a Torsion Test of Full-Size, Structural Lumber
• Experimental Evaluation of the Torsion Test for Determining Shear Strength of Structural Lumber
• Evaluation of the Elevated Temperature Creep Strength of Three Lead-Free Solder Alloys in Soldered Joints
• Empirical Models Depicting Grain Angle Effects on Load-Embedment Response of Dowel-Type Fasteners in Wood
• Precision in the Extrapolation of Creep Rupture Data
• Evaluation of Wood Poles Using a Free Vibration Technique
• The Role of Bearing Plates in the Five-Point Bending Tests of Structural-Size Lumber
• Decay of Wood and Wood-Based Products Above Ground in Buildings
• Extrapolation of Creep Strain Data for Pure Copper
• A Testing Device for the Mechanical Characterization of Wood Beams or Plates Under Bending Compression
• Qualitative Assessment of Failure in Bolted Connections: Maximum Stress Criterion
• View All JTE