Digital Library / Topics / Construction / Cement; Lime; Gypsum / Recent 25 JTE

• Effect of Sampling Location on the Air Void Analyzer Test Results on Concrete Pavements: Evaluation of Data from a 16 State-Pooled Fund Project
• A Laboratory Study of the Effectiveness of Various Additives on Moisture Susceptibility of Asphalt Mixtures
• California Bearing Ratio Behavior of Soil-Stabilized Class F Fly Ash Systems
• Elastic Strain, Creep, and Recovery in Mortars: Additional Analysis
• Monitoring of Cement Stabilized Surrogate Waste Using Resonant Frequency Techniques
• Prediction of the Strength of Ceramic Tubular Components: Part IIExperimental Verification
• Prediction of the Strength of Ceramic Tubular Components: Part IAnalysis
• Effect of Bearing Plate Properties on the Behavior of Block Masonry Prisms under Axial Compression
• Gypsum Content of Cements Used in Concrete Cured by Accelerated Methods
• Correlation of Strength of Cement Mortar Cured by 28-Day Standard and Accelerated Methods
• Past, Present, and Potential Developments of Sulfate-Resisting Concretes
• Base Stabilization Using Pelletized Blast Furnace Slag
• Influence of Calcium Chloride on the Drying Shrinkage of Alite Paste
• The Effects of Temperature and Relative Humidity on Static Strength of Hydrated Portland Cement
• A Simple Technique for Determining Relative Strength of Aggregates
• Polymeric Materials for Concrete
• Tricalcium Silicate Hydration in the Presence of Various Salts
• Mechanisms of Acceleration by Calcium Chloride: A Review
• A New Test for Sulfate Resistance of Cements
• A Study of Cement and Concrete Correlation
• Capillary Porosity in Hardened Cement Paste
• Some Factors Affecting Cement Mortar Strength Results Using ASTM Standard Test Methods C 348 and C 349
• Precision of Early Shrinkage Measurements
• View All JTE