Nonferrous Metal Products

    Inverse Modeling Applied for Material Characterization of Powder Materials

    Cohesive Zone Property Measurement by a Hybrid Experimental and Numerical Method Using Ball Indentations

    Modified Approach for Quantitative Texture Evaluation in Case of Transverse Textured Zirconium Alloy Tubes

    Effect of Lubrication in Cold Upsetting Using Experimental and Finite Element Modeling

    Ionic Conductivity of a Carbonate–Ion Conductor

    Design and Evaluation of Efficient Router Architecture for Triplet-Based Network-on-Chip Topology

    Mechanical Failure Study of Aluminum Extrusion Dies as Affected by the Quality of the Billets

    Design and Evaluation of Low-Latency and Shortest-Path Routing Algorithm for Triplet-Based Hierarchical Interconnection Network

    An Experimental Device for Material Characterization of Powder Materials

    Functionally Graded Bronze/Tungsten-Carbide Castings: A Characterization and Property Study

    Detailed Investigation of Forming Limit Determination Standards for Aluminum Alloys

    Investigation of Interaction between the Silicone Rubber Sealant and Concrete Substrate

    Elliptical Hole-Crack Problems in an Infinite Plate Subjected to Internal Pressure

    Mechanical Behavior of Aluminum Alloys During Small Punch Test

    Temperature Distribution during Friction Stir Spot Welding of Magnesium Alloy AM60B

    Small-Scale Mechanical Characterization of Aluminum and Titanium Alloys

    Solderability Testing of Lead-Free Solder Joints Using Miniature Specimens

    A Comparison of Two Crush Test Methods for Honeycombs Under Compression and Shear

    Novel Uncertainty-Evaluation Method of Virtual Instrument Small Sample Size

    Texture Evaluation in Zr-2.5 % Nb Pressure Tubes Using Kearn’s f Parameter

    An Internal Conical Mandrel Technique for Fracture Toughness Measurements on Nuclear Fuel Cladding

    Consolidation of Mechanically Alloyed Titanium Silicide using Polycarbosilane

    Influence of Two Hexavalent Chromium-Free Coating types on Mechanical Behavior of Bolted Joints

    A Comparative Finite-Element Study of Hot Rolling and Plane Strain Compression Testing of Aluminum AA1050

    Geometry of Solidification. I: Shrinkage Criterion Using Results from Finite Element Analysis

    Measurement of Young's Moduli for Lead Zirconate Titanate (PZT) Ceramics

    Eddy Current Decay and Resistivity Measurements on Longitudinally Grooved High-Purity Aluminum Bars

    A New Approach to Measuring Transverse Properties of Structural Tubing by a Ring Test—Experimental Investigation

    Eddy Current Decay Resistivity Measurements Using a Digital Voltmeter

    Development of Analytical Methods for Quantification of Residual Powder on ‘Powderless’ Latex Gloves

    Development and Applications of Titanium Alloy SP-700 with High Formability

    Performance of Zirconium and Zirconium Alloys in Organics

    Expanded Windows for Titanium Use in the Pulp/Paper Peroxide Bleach Plant

    Commercial Applications of Zirconium Explosion Clad

    Ti Roll-Clad Plate: More Cost-Effective Plate Products for Utilizing Titanium and Zirconium Alloys in Chemical Processes

    Differential Thermal Analysis of Solid Zirconium

    Stiffening Effects of Photoelastic Coatings on Orthotropic Plates

    Evaluation of the Corrosion of MoSi2 by Molten Glass

    Dynamic Strain Aging in a New Single Crystal Nickel-Based Superalloy (CMSX-4)

    Testing the Superplastic Flow Characteristics of Advanced Aluminum Alloys

    Design of a Multi-Spring Floating Die Compaction System for Plastic Powders

    Effect of Relative Humidity on Permeance of Coatings

    Effect of Strain Rate and Temperature on the Mechanical Anisotropy of Recrystallized Zircaloy TREX (Tube Reduced Extrusion)

    Influence of Heat Treatment on Structure and Oxidation Behavior of Zr-2.5Nb

    Simple Measuring System for Electrical Energy Consumed by Auxiliaries for Advanced Batteries

    Monitoring of Oxide Layer Thickness on Zircaloy-2 by the Eddy Current Test Method

    Thermoelectric Differences Used for Metal Sorting

    Creep Behavior of Copper and Copper Alloys As Design Criteria in Pressure Vessel Manufacture

    Deep-Drawing of Anisotropic Work-Hardening Sheet Metals Into a High-Pressure Medium

    The Shear Strain to Fracture Characteristics of a Titanium Alloy and an Ultrahigh Molecular Weight Polyethylene Under Complex Loading Conditions

    Impurity Variations in Electrolytic Cathode Copper

    Sampling of Electrorefined Copper Cathodes

    Tensile Properties of A357-T6 Aluminum Castings

    Stress Relaxation in Bending of Copper Beryllium Alloy Strip

    Reproducibility of the Surface Area of Some Powders as Measured by the Monosorb® Surface-Area Analyzer Using the Brunauer-Emmett-Teller Equation

    Mechanical Properties in Bending at Elevated Temperature of High Strength Copper Alloy Flat Spring Materials

    Phase Analysis of Standard and Molybdenum-Modified Mar-M509 Superalloys

    Strength and Toughness of a Metastable Beta-Titanium Alloy as Influenced by Strain Rate Variations

    Fatigue Damage Alleviation by Intermittent Electroplating

    Mechanical Properties at Elevated Temperature of CuBath® Electroplated Copper for Multilayer Boards

    Properties of 713LC Compacts, Hot Isostatically Pressed at Supersolidus Temperatures

    New Reference Radiographs for Magnesium Alloy Castings

    Fatigue of Nickel-Plated Copper

    Crack Initiation and Growth in Plane Strain, Fully Plastic Zircaloy®

    Contact Angle of Zinc on Some Ceramic Materials and Metals

    Comparison of the Heat Treatment Responses of Three Commercial Titanium Alloys

    Heat Treatment Effects on the Mechanical Properties in Ti-6A1-6V-2Sn

    The Annealability Testing of Copper