Digital Library / Topics / Iron and Steel Products / Coated Steel Products / Recent 25 JTE

• FIMEC Tests on SPS sintered FeMo Ultra-Fine-Grained Alloys
• Performance Evaluation Test of the Time-of-Flight Diffraction Technique for Welded Joints of Steel Bridges
• Determination of Material Properties of Functionally Graded Plate Using the Dispersion of Guided Waves and an Artificial Neural Network
• Quantification of Constitutive Behavior of Sheet Metals Subjected to Dynamic Bulge Loading
• Crack Growth Behavior in Overloaded Specimens with Sharp Notch in Low Carbon Steel
• Comparison of Different Methods for Fatigue Limit Evaluation by Means of the Monte Carlo Method
• Constant and Variable Amplitude Cyclic Plasticity in 316L Stainless Steel
• High-Speed Balancing of Rotors with Overhangs: When Is Overhang Likely to Cause Problems?
• On Setting Testing Rate Limitations for the Master Curve Reference Temperature, To, of ASTM E 1921
• The Response of 1CrMoV Rotor Steel to Service-Cycle Thermomechanical Fatigue Testing
• Application of the Master Curve Method and the Engineering Lower Bound Toughness Method to Laser Welded Steel
• A Procedure for Extended Extrapolation of Creep Rupture Data
• Yield Strength in Relation to Cyclic Loading
• Small Punch Testing in Creep Conditions
• Test Devices for Strength Measurements of Bars Under Contact Loading
• Finite Element Analysis and Small Punch Testing for Determining the Cryogenic Fracture Toughness of Austenitic Stainless Steel Welds
• Development of a Machine for Closely Controlled Rolling Contact Fatigue and Wear Testing
• Crack-Arrest Testing of Irradiated Nuclear Reactor Pressure Vessel Steels at the Oak Ridge National Laboratory
• Ultimate Strength of Resistance Spot Welds Subjected to Combined Tension and Shear
• Low-Temperature Aging Kinetics in Cast Duplex Stainless Steels: Experimental Characterization
• Experimental Determination of the Cooling Curve for Production of Continuous-Cast Steel Billets
• Corrosiveness of Chromate Exposure to Steel Embedded in Soil or Concrete
• A Reversing Direct Current Potential Drop System for Detecting and Sizing Fatigue Cracks along Weld Toes
• Deformation and Fatigue Behavior of Vanadium-Based Microalloyed Forging Steel in the As-Forged and Q&T Conditions
• Mechanical Study of a Hypoeutectoid Steel Weld
• View All JTE