|
|
|
SEDL / Topics / Iron and Steel Products / Steel--Bars, Forgings, Bearing, Chain, Springs / All JTE
- The Effect of Large Scale Plastic Deformation on Fatigue Crack Length Measurement with the Potential Drop Method
- A Photogrammetric System Design to Determine the Load-Deflection Behaviors of Materials in Civil Engineering
- Use of Miniature Specimen Test and Finite Element Method for Evaluation of Yield Strength and Fracture Toughness in Metallic Alloys
- Fatigue Damage Severity Calculation for Vibration Tests
- Yield Strength Evaluation by Small-Punch Test
- Performance Evaluation of Resistance Spot Welded Interstitial Free Steel Under Cryogenic Conditions
- Research on the Key Technology of a Testing System of Piezomagnetic Force Transducer
- Ductile Damage Analysis for Small Punch Specimens of Type 304 Stainless Steel Based on GTN Model
- Comparison of Both Creep Resistance and Material Properties of High-Strength Low-Alloy Steel and Stainless Steel
- Improvements in the Mercury Displacement Method for Measuring Diffusible Hydrogen Contents in Steels
- FIMEC Tests on SPS sintered FeMo Ultra-Fine-Grained Alloys
- Performance Evaluation Test of the Time-of-Flight Diffraction Technique for Welded Joints of Steel Bridges
- Determination of Material Properties of Functionally Graded Plate Using the Dispersion of Guided Waves and an Artificial Neural Network
- Crack Growth Behavior in Overloaded Specimens with Sharp Notch in Low Carbon Steel
- Quantification of Constitutive Behavior of Sheet Metals Subjected to Dynamic Bulge Loading
- Comparison of Different Methods for Fatigue Limit Evaluation by Means of the Monte Carlo Method
- Constant and Variable Amplitude Cyclic Plasticity in 316L Stainless Steel
- High-Speed Balancing of Rotors with Overhangs: When Is Overhang Likely to Cause Problems?
- On Setting Testing Rate Limitations for the Master Curve Reference Temperature, To, of ASTM E 1921
- The Response of 1CrMoV Rotor Steel to Service-Cycle Thermomechanical Fatigue Testing
- Application of the Master Curve Method and the Engineering Lower Bound Toughness Method to Laser Welded Steel
- A Procedure for Extended Extrapolation of Creep Rupture Data
- Yield Strength in Relation to Cyclic Loading
- Test Devices for Strength Measurements of Bars Under Contact Loading
- Small Punch Testing in Creep Conditions
- Finite Element Analysis and Small Punch Testing for Determining the Cryogenic Fracture Toughness of Austenitic Stainless Steel Welds
- Development of a Machine for Closely Controlled Rolling Contact Fatigue and Wear Testing
- Crack-Arrest Testing of Irradiated Nuclear Reactor Pressure Vessel Steels at the Oak Ridge National Laboratory
- Ultimate Strength of Resistance Spot Welds Subjected to Combined Tension and Shear
- Low-Temperature Aging Kinetics in Cast Duplex Stainless Steels: Experimental Characterization
- Experimental Determination of the Cooling Curve for Production of Continuous-Cast Steel Billets
- Corrosiveness of Chromate Exposure to Steel Embedded in Soil or Concrete
- A Reversing Direct Current Potential Drop System for Detecting and Sizing Fatigue Cracks along Weld Toes
- Deformation and Fatigue Behavior of Vanadium-Based Microalloyed Forging Steel in the As-Forged and Q&T Conditions
- Mechanical Study of a Hypoeutectoid Steel Weld
- Study of Steel Weldments Using Electronic Speckle Pattern Interferometry
- Characterization of Early and Modern Wire for an Italian Harpsichord
- Evaluation of Rating Numbers for Atmospheric Corrosion Resistance of Weathering Steel
- Reliability and Life Estimation from Component Fatigue Failures Below the Go-No-Go Fatigue Life Limit
- Warm Precracking at 295 K and Its Effects on the 4-K Toughness of Austenitic Steels
- Electrical Resistance Measurements on Type 304 Stainless Steel with Different Degrees of Sensitization
- Bore Inspection and Life Evaluation of Vintage Steam Turbine/Generator Rotors
- Crevice Corrosion Testing in Natural Seawater: Significance and Use of Multiple Crevice Assemblies
- Dynamic Strain-Aging and Neutron Irradiation Effects on Mechanical and Fracture Properties of A533B Class 1 PV Steel and 2.25Cr-1Mo Steel
- An Approach to Predicting Long-Term Toughness, Strength, and Ductility of a Cr-Mo-V Steel Alloy Using Short-Term Tests
- Creep Rupture Behavior of Precorroded Carbon Steel
- A Method for Obtaining Conservative S-N Data for Welded Structures
- Localized Intrinsic Strengthening Approach (LISA): A Practical Method for Determining the Tensile Strength of Multistrand Cables
- Cryogenic Fatigue Properties of 304L and 316L Stainless Steels Compared to Mechanical Strength and Increasing Magnetic Permeability
- Diametral Strain Response and Microstructural Yielding Mechanisms of a Bainitic Pressure Vessel Steel
- Evaluation of Intergranular Fracture Initiation in Transition Region of Retired Steam Turbine Rotor Steel Using Small Specimens and the Acoustic Emission Technique
- Theory, Characteristics, and Operating Parameters of Portable Optical Emission Spectrometers for the On-Site Sorting and Identification of Steels
- Interpretive Report on the Sensitization of Type 304 Stainless Steel
- Use of X-Ray Diffraction with the Gaussian Curve Method to Evaluate the Hardening in Quenched Steels
- A Modified Metallographic Method to Detect Sensitization in Type 316 Stainless Steel
- Effect of Misalignment on the Time to Rupture
- Influence of Gage Dimensions on Elongation Values for Type 316 Stainless Steel
- The Effect of Fire Fighting Media on the Mechanical Properties of Steel Bars
- Strain Distribution Patterns During Plane Strain Compression
- Analysis of Hot Tension Test Data To Obtain Stress-Strain Curves to High Strains
- Interstitial Carbon and Nitrogen Effects on the Cryogenic Fatigue Crack Growth of AISI 304 Type Stainless Steels
- Predicting Heat-Affected Zone Hardness by the Weld Test Method
- Explanation of the Empirical Factor Recommended in the Permanganate Titration of High Chromium Stainless Steel from Tristumulus Chromaticity
- Characterization of the Crack Toughness Behavior of Structural Steels by the Tearing Modulus Parameter and Acoustic Emission
- Some Aspects of Biaxial Creep Testing of Thin-Walled Cylindrical and Spherical Pressure Vessels
- Scale and Corrosion Parameters at a Geothermal Loop Experimental Facility
- Quenching, Tempering, and Aging Chromium-Molybdenum-Vanadium Cast Steels
- A Simple Test Method for the Evaluation of Tearing Modulus
- A Comparative Study of the Effect of Low Temperature on the Fracture Toughness and Cyclic Properties of Two Candidate High-Strength Low-Alloy Steels for Arctic Pipeline Applications
- A Rapid Test for the Assessment of Steel Sheet and Tinplate Properties
- Influence of Cold Work on the In-Pile Stress Rupture Strength of 16Chromium-16Nickel-Niobium Austenitic Stainless Steels
- Holographic Examination of a Composite Pressure Vessel
- Evaluation of Intergranular Corrosion in Stainless Steel
- Yield Point Standardization
- A High Purity Approach to High Chromium Ferritic Stainless Steels
- Programmed In Situ Melting, Freezing, and Tensile Testing for Laboratory Study of High Temperature Properties of As-Cast Metals
- Magnetomechanical Damping Properties of AISI 403 Stainless Steel with Applied Static Torsional and Axial Stresses
- High-Temperature Properties of a High-Purity Ferritic Stainless Steel
- A Mathematical Description of the Elevated Temperature Flow Behavior of Type 304 Stainless Steel at High Strain Rates
- The Influence of Loading Variables on Environment-Enhanced Fatigue Crack Growth in High Strength Steels
- Flow and Fracture of High Strength Steels in Torsion
- Contributions of Selected Residual Elements to the Radiation Embrittlement Sensitivity of Steel Forgings
- Effect of Specimen Geometry on Hot Torsion Test Results for Solid and Tubular Specimens
|