SEDL / Topics / Petroleum and Chemical Engineering / All JAI

• Characteristics of PAG Based Bio-Hydraulic Fluid
• Intensive Quenching of Steel Parts and Tools in Water Salt Solutions of Optimal Concentration
• Effect of Accuracy of Temperature Measurements on Determination of Heat Transfer Coefficient during Quenching in Liquid Media
• Boiling Heat Transfer: An Overview of Longstanding and New Challenges
• Use of Vegetable Oils and Animal Oils as Steel Quenchants: A Historical Review—1850-2010
• Application of ECLs and Today’s Legislation
• Characteristics of Base Fluid in Environmentally Acceptable Lubricants
• Luminescent Bacteria as an Indicator Species for Lubricant Formulation Ecotoxicity
• Experiences with ASTM D02 Practices D4378 and D6224 for Turbine Oils and Auxiliary Power Plant Equipment Condition Monitoring Programs
• Thermal Oxidative Stability of Vegetable Oils as Metal Heat Treatment Quenchants
• Analysis of In-Service Lubricating Grease
• Modeling and Simulation of Film and Transitional Boiling Processes on a Metallic Cylinder During Quenching
• Guidelines for Alarm Limits and Trend Analysis
• A New Way to Determine the Biodegradability of Lubricants by a Biokinetic Model
• In-Line Monitoring of Particulate, Color, and Water Content in Lubricating Oils to Facilitate Predictive Maintenance, Reduce Wear, and Provide Real Time Alarming
• Optimizing a Wind Turbine Oil Condition Monitoring Program
• Compatibility of Vegetable Oil Based Lubricating Greases With Different Mineral Oil Based Greases
• The Effect of Stabilizing Agent on Platinum Nanoparticles and Implications Towards the Oxygen Reduction Reaction
• CFD-Simulation of Film Boiling at Steel Cooling Process
• The Use of Linear Sweep Voltammetry in Condition Monitoring of Diesel Engine Oil
• Duration of the Transient Nucleate Boiling Process and Its Use for the Development of New Technologies
• Lubricating Oils Evaluation of Dispersancy Capacity of Lubricating Oils and the Impact of Biofuels on Lubricant Dispersancy
• Recent Developments in Online Oil Condition Monitoring Sensors and Alignment with ASTM Methods and Practices
• Experimental Investigation of the Onset of Subcooled Nucleate Boiling in an Open-Pool Nuclear Research Reactor
• Polyalkylene Glycols as Next Generation Engine Oils
• Particle Characterization and Sizing: SEM Utilizing Automated Electron Beam and AFA Software for Particle Counting and Particle Characterization
• Boiling Heat Transfer of Butanol Aqueous Solution-Augmentation of Critical Heat Flux
• Outstanding Return on Investment When Industrial Plant Lubrication Programs are Supported by International Standards
• USDA Programs to Support Development and Use of Biobased Industrial Products
• An Overview of Progress and New Developments in FTIR Lubricant Condition Monitoring Methodology
• Bubble Dynamics and Heat Transfer in Pool Boiling on Wires at Different Gravity
• Modeling Vertical Subcooled Boiling Flows at Low Pressures
• Correlation Between Chemical Composition of Steel, Optimal Hardened Layer, and Optimal Residual Stress Distribution
• A Volume of Fluid Phase Change Model on Adaptive Octree Grids
• Performance Characteristics of a Dual Fuel Engine Operated with Mahua Biodiesel and Liquefied Petroleum Gas
• Vehicle Emissions and Fuel Economy Effects of 16 % Butanol and Various Ethanol Blended Fuels (E10, E20, and E85)
• Potentiometric Titration as an Alternative Technique for the Determination of the Iodine Value in Biodiesel Matrix from Palm Oil
• Acid Number Determination of Biodiesel by Potentiometric Titration Using Different Methods
• Enhancement of Heat Transfer Characteristics of Transformer Oil by Addition of Aluminium Nanoparticles
• Modeling and Simulation of the Heat and Mass Transfer Characteristics of Binary Mixtures for Boiling Flow Applications
• Forced Convective Boiling of Ethylene Glycol/Water Mixtures Inside a Small Tube
• A Review of Pb-Free High-Temperature Solders for Power-Semiconductor Devices: Bi-Base Composite Solder and Zn–Al Base Solder
• Heat Transfer Stages Recognition by Boiling Acoustic During Quenching
• Empirical Modeling of the Time-Dependent Structural Build-up of Lead-Free Solder Pastes Used in the Electronics Assembly Applications
• Wetting Behaviour and Evolution of Microstructure of Sn–Ag–Zn Solders on Copper Substrates with Different Surface Textures
• Monitoring and Blending Biofuels Using a Microfluidic Sensor
• Determination of Ester Content in Different Kinds of Biodiesel
• Analytical Characterization of Sediment Formed in Soy Oil-Based B20 Biodiesel
• The Influence of the Addition of Oils in the Diesel Fuel Density
• Solder Joint Reliability of SnBi Finished TSOPs with Alloy 42 Lead-Frame under Temperature Cycling
• Rheological Characterisation and Empirical Modelling of Lead-Free Solder Pastes and Isotropic Conductive Adhesive Pastes
• The Microstructural Aspect of the Ductile-to-Brittle Transition of Tin-Based Lead-Free Solders
• Experimental Investigations of Preheated Jatropha Oil Fuelled Direct Injection Compression Ignition Engine—Part 1: Performance, Emission, and Combustion Characteristics
• Synthetic Jet Fuel Blend Analysis Using Mid-Infrared Spectroscopy
• Immobilization of Cellulase and Hemicellulases on Porous Glass Beads
• Ball Grid Array Lead-Free Solder Joint Strength under Monotonic Flexural Load
• Tensile Properties of Sn-10Sb-5Cu High Temperature Lead Free Solder
• Wetting Behavior of Solders
• Simulating Residual Stresses in Ribbons of Amorphous Metallic Alloys
• Compositional Analysis of Microwave Chemically Treated Biomass Samples
• CO₂-Neutral Fuels and Lubricants Based on Second Generation Oils such as Jatropha
• Pretreatment of Douglas Fir Wood Biomass for Improving Saccharification Efficiencies
• Determining the Oxidation Stability of Biodiesel and Blends Using a New Rapid Small Scale Oxidation Test (RSSOT)—The PetroOXY
• Oxidation Stability of Soy and Palm Based Biodiesels Evaluated by Pressure Differential Scanning Calorimetry
• Review of Key Research Efforts to Make Algae Fuels Sustainable
• pH Measurement in Bioethanol by Using Different Electrodes and according to International Standards
• Cold Flow Properties of Biodiesel by Automatic and Manual Analysis Methods
• Contaminants in Used Oils and Their Behavior
• The Effects of Lubricant Ingredients on New Hydraulic Oil Cleanliness
• Atomic Force Microscopy of Geroler Motor Wear Debris Ferrograms
• Effects of Contamination on Aerospace Hydraulic Component and System Performance
• Varnish Formation in the Gas Turbine Oil Systems
• Viscometric Temperature Sensitivity of Engine Lubricants at Low Temperature and Moderately High Shear Conditions
• No/Low SAP and Alternative Engine Oil Development and Testing
• ROBO—A Bench Procedure to Replace Sequence IIIGA Engine Test
• Mechanochemical Additive-Assisted Reconditioning Effects and Mechanism on Worn Ferrous Surfaces
• Design of Functionalized PAMA Viscosity Modifiers to Reduce Friction and Wear in Lubricating Oils
• Contamination of Power Generation Lubricants
• Studies of the Oxidation Dynamics of Turbine Oils—Initial Data from a New Form of the Rotating Pressure Vessel Oxidation Test
• The “Practice Relevant Pitting Test”—A New Improved Test Method to Evaluate the Influence of Lubricants on the Pitting Load Capacity of Case Carburized Gears
• Surface Characterization Techniques in Wear of Materials
• Heavy-Duty Diesel Engine Cavitation Test
• Synergistic Tribological Performances of Borate Additive in Lubricants
• Validation of Oxidative Stability of Factory Fill and Alternative Engine Oils Using the Iron Catalyzed Oxidation Test
• A Review of Engine Oil Oxidation Bench Tests and Their Application in the Screening of New Antioxidant Systems for Low Phosphorus Engine Oils
• Study of the ZDDP Antiwear Tribofilm Formed on the DLC Coating Using AFM and XPS Techniques
• Coolant Development in Asia
• Accelerated Oxidation and Corrosion Testing of Engine Coolants Using a Rotary Pressure Vessel Oxidation Test
• Comparison of Bench Test Methods to Evaluate Heavy Duty Coolant Thermal Stability
• Additive and Base Oil Effects in Automatic Particle Counters
• Modern Turbine Oil Oxidation Performance Limits—Meeting and Measuring Them—A Shell Perspective
• Compatibility Testing of Multi-Vehicle Coolant Chemistries
• A Comparison of Membrane Technologies for Engine Coolant Recycling
• Cavitation Protection Performance of Nitrite-Free Organic Acid Based Coolant for Heavy-Duty Engines
• Component Durability and High Mileage Performance of a Full Carboxylate Coolant in Heavy Duty Diesel (HDD) Engines
• Investigation of Interaction Between Coolant Formulations and Flux Loading/Compositions in Controlled Atmosphere Brazed (CAB) Aluminum Surfaces in Heat Exchanger Applications
• Physical, Performance, and Chemical Changes in Turbine Oils from Oxidation
• New Electrochemical Methods for the Evaluation of Localized Corrosion in Engine Coolants
• Statistical Performance of Methods for Measuring Sulfur Concentrations in Ultra Low Sulfur DieselReport from the 2004 Inter-laboratory Crosscheck Program
• Review of Degradation Mechanisms Leading to Sludge and Varnish in Modern Turbine Oil Formulations
• Oxidation Testing of Long-Life Turbine Oil Fluids. Can We Do Better?
• Residue Analysis on RPVOT Test Samples for Single and Multiple Antioxidants Chemistry for Turbine Lubricants
• Evaluation and Comparison Between Oxidation Stability Test Methods for Turbine Oils
• Oxidation Fundamentals and Its Application to Turbine Oil Testing
• Analysis of Fuels, Lubricants, and Greases Using X-ray Fluorescence Spectrometry
• Mercury Measurements in Fossil Fuels, Particularly Petrochemicals
• Analysis of Gasoline and Diesel Fuel Samples by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Using Pneumatic Nebulizer and Standard Spray Chamber
• The Use of Microwave Digestion and ICP to Determine Elements in Petroleum Samples
• Analysis of the Volatiles Generated During the Selby-Noack Test by ³¹P NMR Spectroscopy
• Improvements in the Determination of Fluorine in Fuel and Lubricants by Oxidative Combustion and Ion-Selective Electrode Detection
• Advances in ICP-MS Technologies for Characterization and Ultra-Trace Speciation as a Tool for the Petroleum Industry
• Direct Trace and Ultra-Trace Metals Determination in Crude Oil and Fractions by Inductively Coupled Plasma Mass Spectrometry
• Latest Improvements on Using Polarized X-Ray Excitation EDXRF for the Analysis of Low Sulfur Content in Automotive Fuel
• Phosphorus Additive Chemistry and Its Effects on the Phosphorus Volatility of Engine Oils
• Rapid Determination of Sulfur in Liquid Hydrocarbons for At-Line Process Applications Using Combustion/Oxidation and UV-Fluorescence Detection
• Sampling and Analysis of Mercury in Crude Oil
• Recent Advances in Gas Chromatographic/Atomic Emission Hetero-Atom Selective Detection for Characterization of Petroleum Streams and Products
• Elemental Analysis of Lubricating Grease by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
• Low-Level Sulfur in Fuel Determination Using Monochromatic WD XRF—ASTM D 7039-04
• Determination of Sulfur Content in Crude Oil Using On-Line X-ray Transmission Technology
• Pyro-Electrochemical On-Line Ultra Low Sulfur Analyzer
• Biocomposites: Exploring Surface Texture for Cell Adhesion
• Fuel Analysis by Filter Furnace Electrothermal Atomic Absorption Spectrometry
• DP-SCD and LTMGC for Determination of Low Sulfur Levels in Hydrocarbons
• Acoustic ‘Distributed Source’ Mixing of Smallest Fluid Volumes
• A Preliminary Mathematical Removal-Rate Model for Si CMP
• The Effect of Ammonium Nitrate, Coarse/Fine Ammonium Nitrate Ratio, Plasticizer, Bonding Agent, and Fe₂O₃ Content on Ballistic and Mechanical Properties of Hydroxyl Terminated Polybutadiene Based Composite Propellants Containing 20 % AP
• Wear Behavior of Niobium Boride Coatings
• Determination of Total Mercury in Crude Oil by Combustion Cold Vapor Atomic Absorption Spectrometry (CVAAS)
• Understanding Polymeric Pads in Pre-CMP Conditioning
• The Effect of Aluminum Content Variation on Burning Rate, Pressure-Propellant Area Ratio Relationship, and Other Properties of Hydroxyl Terminated Polybutadiene Based Composite Propellants
• Rotrode Filter Spectroscopy: A Recently Improved Method to Detect and Analyze Large Wear and Contaminant Particles in Fluids
• Steel Superstrengthening Phenomenon
• Rheological 3-D Modeling of Scuffing for the EP-Additive Condition
• Ultrathin Films to Modify Mechanical and Tribological Behavior of MEMS Components
• Zen and the Art (or Is It Science) of a Perfect Analysis
• Trace Levels of Sulfur in the Fuels of the Future: Analytical Perspective
• Sliding Wear Characteristics of Materials in Artificial Seawater