SEDL / Topics / Materials Performance and Characterization / All JAI

• Layer Growth Kinetics during Post-Discharge Nitriding
• Point Load Weight Functions for Semi-Elliptical Cracks in Finite Thickness Plate
• Crack Closure Behavior on a Variety of Materials under High Stress Ratios and K_max Test Conditions
• FEM Analysis of a DCP Implant on a Human Femoral Bone With a Fracture Gap
• Unraveling the Science of Variable Amplitude Fatigue
• Characterizations of Creep-fatigue Crack Initiation and Growth Life for P92 using Circular Notched Round Bar Specimen
• Fatigue Crack Closure at Near-Threshold Growth Rates in Steels, Effects of Microstructure, Load Sequence and Environment
• Modeling of Surface Crack Advance in Round Wires Subjected to Cyclic Loading
• Fatigue Crack Closure in Residual Stress Bearing Materials
• Influence of Protective Coatings on Damage and Lifetime of Alloy 247 DS in Thermomechanical Fatigue and Bending Tests
• Evaluation of the Testing and Analysis Methods in ASTM E2760-10 Creep-Fatigue Crack Growth Testing Standard for a Range of Steels
• Dimensional Analysis and Fractal Modeling of Fatigue Crack Growth
• Long-Term Hydrostatic Strength and Design of Thermoplastic Piping Compounds
• ASTM D 3350: A Historical and Current Perspective on a Standard Specification for Identification of Polyethylene Plastics Pipe and Fittings Materials
• Modeling Creep-Fatigue Behavior of Mod.9Cr-1Mo Steel
• NSF 14: Shaping the Future of the Plastic Piping Industry
• How to Crawl Through a Pipe—Terminology
• Design and Performance of Plastic Drainage Pipes in Environmental Containment Facilities
• Technical Considerations When Fabricating PVC Pressure Fittings
• Polyamide 12 Natural Gas Distribution Systems Operating at Pressures Greater Than 125 Psig
• Deflection Lag, Load Lag, and Time Lag of Buried Flexible Pipe
• Effect of Creep and Oxidation on the Isothermal and Thermomechanical Fatigue Behavior of an Austenitic Stainless Steel
• The Effects of Dwell on the LCF Behavior of IN617
• Creep Fatigue Behavior of Creep Strength Enhanced Ferritic Steels
• North America’s Cinderella Pipe Story: A Look at PVC Pipes’ Climb to the Top
• Tensile Testing of a Push-On Restrained Joint PVC Pipe
• Environmental Stress Cracking of Commercial CPVC Pipes
• Advanced Ductility Exhaustion Methods for the Calculation of Creep Damage During Creep-Fatigue Cycling
• A Brief History of the Development and Growth of the Corrugated Polyethylene Pipe Industry in North America
• A Service Life Assessment of Corrugated HDPE Drainage Pipe
• Models for Small Crack Growth under Creep-Fatigue in Austenitic Steels
• Creep-Fatigue at High Temperature of Notched Single Crystal Superalloys
• Creep and Environmental Effects on the High Temperature Creep-Fatigue Behavior of Alloy 617
• Effects of the Environment on the Crack Propagation Behavior of IN718 in the Temperature Range of the Dynamic Embrittlement
• Modeling Creep-Fatigue Deformation of Ni-Base Superalloys Using Crystal Viscoplasticity
• Probabilistic Prediction of Crack Growth Based on Creep/Fatigue Damage Accumulation Mechanism
• Creep Crack Growth Under Complex Loading
• The Hydrostatic Stress Board of Plastics Pipe Institute: The First 50 Years
• ASTM Round-Robin on Creep-Fatigue and Creep Behavior of P91 Steel
• Unique Calibration Case Study for Predictive Model of Installation Loads for Directional Drilled Fusible PVC Pipe
• Building Knowledge from Failure Analysis of Plastic Pipe and Other Hydraulic Structures
• Axial Response of HDPE Pipes as a Result of Installation by Directional Drilling
• Component Assessment Data Requirements from Creep-Fatigue Tests
• Cohesive Zone Modeling of Initiation and Propagation of Multiple Cracks in Hard Thin Surface Coatings
• Yesterday, Today, and Now: Polyamide-11 Gas Piping at 200 psig Under the New Rules
• Challenges in Investigating Chlorinated Polyvinyl Chloride Pipe Failures
• Trenchless Case History—University of Denver’s Use of High-Performance Restrained-Joint Water Distribution Pipe
• Plastic Tubing Prospect to Replace Cast Iron Conduit in Steam Heating Systems
• The Influence of Elastic Follow-Up on the Integrity of Structures
• Long Life Fatigue Fracture Induced by Interior Inclusions for High Carbon Chromium Bearing Steels Under Rotating Bending
• On the Beauty of Analytical Models for Fatigue Crack Propagation and Fracture—A Personal Historical Review
• Stress Crack Protocol for Finished Product Testing of Corrugated High Density Polyethylene Pipe
• Guided Side-Bend: An Alternative Qualification Method for Butt Fusion Joining of Polyethylene Pipe and Fittings
• Designing Stormwater Chambers to Meet AASHTO Specifications
• Fatigue Initiation Modeling of 316LN Steel Based on Nonlocal Plasticity Theory
• Rolling Contact Fatigue Life Test Design and Result Interpretation Methods Maintaining Compatibility of Efficiency and Reliability
• Development of a Sliding-Rolling Contact Fatigue Tester
• Residual Strain Effects on Bridging Stress of Cracked and Delaminated Fiber Metal Laminates
• Fatigue Crack Propagation Behavior of an Inertia Friction Welded α/β Titanium Alloy
• Design Development of Large Thermoplastic Chambers for Stormwater Retention
• The Analysis of Fracture Mechanisms of Ferritic Steel 13HMF at Low Temperatures
• Mesh-Free Solution of Two-Dimensional Edge Crack Problems under Thermo-Mechanical Load
• Modeling of Crack Propagation in Weld Beam-to-Column Connections Submitted to Cyclic Loading with a Cohesive Zone Model
• Mechanical Conditioning of Superelastic Nitinol Wire for Improved Fatigue Resistance
• Sub-Surface Initiated Rolling Contact Fatigue—Influence of Non-Metallic Inclusions, Processing History, and Operating Conditions
• Temperature Calibration Techniques for TMF Testing
• Specifying Plastic Pipes for Trenchless Applications
• Crack-Closure Behavior of 7050 Aluminum Alloy near Threshold Conditions for Wide Range in Load Ratios and Constant K_max Tests
• Creep-Fatigue Relationships in Electroactive Polymer Systems and Predicted Effects in an Actuator Design
• Effects of Microstructure on the Incipient Fatigue and Fretting Crack Processes in Al-Cu-Li Alloys
• Experimental and Numerical Analyses of Fatigue Behavior of Welded Cruciform Joints
• Effect of Cladding on Biaxially Loaded Underclad Part-Through Cracks
• Fatigue from an Induced Defect: Experiments and Application of Different Multiaxial Fatigue Approaches
• Gigacycle Fatigue Properties of Bearing Steels
• An Assessment of Cumulative Axial and Torsional Fatigue in a Cobalt-Base Superalloy
• Fatigue Assessment of Brazed T-Joints Based on Damage Tolerance Including Residual Stress Effects
• A Non Local Multiaxial Fatigue Approach to Account for Stress Gradient Effect Applied to Crack Initiation in Fretting
• A New Methodology for Predicting Fatigue Properties of Bearing Steels: From X-Ray Micro-Tomography and Ultrasonic Measurements to the Bearing Lives Distribution
• Quality Function Deployment Application on the Development of 100Cr6 Bearing Tubes
• Fatigue Crack Propagation in SAW Seam Welds of API 5L X42 Steel Pipe in the Radial Short Direction
• Comparison of Inclusion Assessment Rating Standards in Terms of Results and Reliability by Numerical Simulation
• A Weibull Stress Model to Predict Effects of Weld Strength Mismatch on Cleavage Fracture Toughness
• Microstructure and Fatigue Strength of the Bearing Steel 52100 after Shortened Bainitic Treatment
• Stress Field Evolution in a Ball Bearing Raceway Fatigue Spall
• Quantitative Relationship between Degree of Center Segregation and Large Carbide Size in Continuously Cast Bloom of High Carbon Chromium Bearing Steel
• Importance of Residual Stresses and Surface Roughness regarding Fatigue of Titanium Forgings
• The Role of Hydrogen on Rolling Contact Fatigue Response of Rolling Element Bearings
• Initiation Behavior of Crack Originated from Non-Metallic Inclusion in Rolling Contact Fatigue
• Modeling the Influence of Microstructure in Rolling Contact Fatigue
• A Methodology for Quantifying Deformations in Stented Coronary Arteries Based on Three-Dimensional Angiography
• Application of Advanced Master Curve Approaches to the EURO Fracture Toughness Data Set
• Investigation of Transition Fracture Toughness Variation within the Thickness of Reactor Pressure Vessel Forgings
• More Accurate Approximation of J-Integral Equation for Evaluating Fracture Resistance Curves
• Revisit of ASTM Round-Robin Test Data for Determining R Curves of Thin-Sheet Materials
• Active Surveillance Systems for Early Detection and Improved Recall Decision Making
• Elastic-Plastic Stress Analysis of Cold-Worked Pin-Loaded Holes
• Definition of the Influence of Pore Size on the Fatigue Limit Using Short Crack Propagation Experiments
• Case Depth and Static Capacity of Surface Induction-Hardened Rings
• Probabilistic Chloride Corrosion Service Life Model Validation: Global and Individual Bridge Deck Predictions
• In-Vitro Modeling of the Dynamic Forces in the Femoropopliteal Artery
• Crystallographic Study of Superelastic Deformation of Nitinol
• Fatigue Crack Growth Simulation in Components with Random Defects
• Determination of ΔK_th by Compression Pre-Cracking in a Structural Steel
• Comparison of Corrosion Rate Measurement of Copper, Zinc, and C1018 Steel Using Electrochemical Frequency Modulation and Traditional Methods
• An Investigation of Factors Impacting Nitinol Wire Fatigue Life
• Fatigue to Fracture: An Informative, Fast, and Reliable Approach for Assessing Medical Implant Durability
• Review of Multiaxis Fatigue Testing for Fatigue/Durability of Cardiovascular Medical Devices
• Electrochemical and in-situ SERS Study of Passive Film Characteristics and Corrosion Performance of 9%Cr Microcomposite Steel in Highly Alkaline Environments
• Feasibility of a Method to Quantify Movement-Induced Conformational Changes in the Superficial Femoral and Popliteal (Femoropopliteal) Arterial Tree Using 3-D Angiography
• Electrochemical Impedance Spectroscopy Measurement during Cathodic Disbondment Experiment of Pipeline Coatings
• Electrochemical Quartz Crystal Microbalance Technique to Monitor External Polymeric Pipeline Coatings
• A Review of Coupled Multielectrode Array Sensors for Corrosion Monitoring and a Study on the Behaviors of the Anodic and Cathodic Electrodes
• Role of Thiosulfate on Chloride Breakdown Potential of Heat Treated Ni-18Cr-6Fe Alloys
• Full-Field Measurements of Fracture Initiation and Crack Growth in Superelastic Nitinol
• Thermal Conductance of Ball Bearings in Vacuum: A Review
• Hydrogen-Related Degradation of Mechanical Properties of Titanium and Titanium Alloys
• A Review of Peripheral Vascular Deformations due to Respiration and Musculoskeletal Influences
• Crevice Corrosion of Grade-12 Titanium
• Biaxial Loading Effect on Higher-Order Crack Tip Parameters
• On Using Laboratory Measurements to Predict Corrosion Service Lives for Engineering Applications
• Relative Comparison Method of Rolling Contact Fatigue Performance of Silicon Nitrides by Stepwise Loading Balls-on-Flat Test—A Candidate for Standard Practice for Comparison of RCF Performance
• Performance of An Enzyme Electrode Designed for a Sulfide Monitoring Biosensor
• Measurement of Corrosion Potentials of the Internal Surface of Operating High-Pressure Oil and Gas Pipelines
• C-Crack Initiation in Quasi-Static and Impact Loading of a Bearing-Grade Silicon Nitride
• Corrosion of Phosphoric Irons in Acidic Environments
• Comparison of Measurements Provided by Several Corrosion Rate Meters with Modulated Confinement of the Current
• A Study of Thin Coating Wear in High Data Density Tape Heads
• Wear and Friction Testing of Hard and Soft Lubricious Coatings in Dry Sliding for Use in Small Arms Action Components
• Electrochemical Techniques in Corrosion: Status, Limitations, and Needs
• Tribochemistry of Multiply Alkylated Cyclopentane Oils on Diamond-like Carbon (DLC) Coated Thrust Bearings
• Prospects for Adapting Current ASTM Wear and Erosion Tests for Bulk Materials to Thin Films, Coatings, and Surface Treatments
• Friction and Wear Behavior of Electroplated and Thermal Sprayed Coatings Tested in an Instrumented Rubber Wheel Abrasion Test
• Use of Coupled Multi-Electrode Arrays to Advance the Understanding of Selected Corrosion Phenomena
• Study of Corrosion Initiation of a Steel Panel from a Defect in Coating Using Localized Electrochemical Impedance Spectroscopy (LEIS)
• Development of Electrochemical Standards for Corrosion Testing
• Coriolis Erosion Testing Approach for Relatively Thick Coatings
• Measuring the Repassivation Potential of Alloy 22 Using the Potentiodynamic-Galvanostatic-Potentiostatic Method
• Investigation of Friction in the Meso Normal Force Range on DLC and TiN Coatings
• Measurement of the Resistance of Treated Metal Foils to Scrubbing Abrasion Using a Modified Reciprocating Wear Test
• Martensite Transformations and Fatigue Behavior of Nitinol
• Characterizing Fatigue Response of Nickel-Titanium Alloys by Rotary Beam Testing
• Effects of Phase Transformations on Fatigue Endurance of a Superelastic NiTi Alloy
• Fatigue Crack Growth Analyses of Aerospace Threaded Fasteners—Part III: Experimental Crack Growth Behavior
• Fatigue Crack Growth Analyses of Aerospace Threaded Fasteners—Part II: Material/Stress State and Bolt Strength
• Fatigue Crack Growth Analyses of Aerospace Threaded Fasteners—Part I: State-of-Practice Bolt Crack Growth Analyses Methods
• Fatigue Crack Growth Analyses of Aerospace Threaded Fasteners—Part IV: Numeric Analyses and Synthesis of All Results
• Residual Stress Distributions for Plate T-Butt Welds in Defect Assessment Applications
• Experimental Studies of NiTi Self-expanding Stent Designs
• Verification of Strain Level Calculations in Nitinol Fatigue Resistance Predictions
• The Development of an Austenitic Stainless Steel Bearing with High Corrosion Resistance and High Nonmagnetic Property
• Experiences in Using Ultrasonic Testing of Bearing Steel for Demanding Applications
• Developing ASTM E 2283: Standard Practice for Extreme Value Analysis of Nonmetallic Inclusions in Steel and Other Microstructural Features
• Effect of Bauschinger-Modified Autofrettage Residual Stresses on Cannon Fatigue Life
• An Investigation of Specimen Geometry Effects on the Fracture Behavior of a Polytetrafluoroethylene Polymer
• Verification of Analytical Models in a Fracture Mechanics Based Approach to Modeling Fretting Fatigue
• Life Prediction of Fretting Fatigue of Ti-6Al-4V
• A Robust Structural Stress Parameter for Evaluation of Multiaxial Fatigue of Weldments
• Effect of Microstructure on Pit-to-Crack Transition of 7075-T6 Aluminum Alloy
• Probing the Elastic-Plastic, Time-Dependent Stress Response of Test Fasteners Using Finite Element Analysis
• Elasto-Viscoplastic Behavior of the Ferritic Stainless Steel AISI 441-EN 1.4509 from Room Temperature to 850°C
• Mechanistic Studies of High-Temperature Crack Initiation in Single Crystal Materials
• Asymptotic Stress Fields for Thermomechanically Loaded Cracks in FGMs
• Optimum Thread Rolling Process that Improves SCC Resistance
• Statistical Analysis of Nonmetallic Inclusions for the Estimation of Rolling Contact Fatigue Range and Quality Control of Bearing Steel
• X-ray Microdiffraction for the Analysis of Bearing Operation Conditions
• Application of the Normalization Method to Dynamic Fracture Toughness Testing of Alloy 718
• Elastic T-Stress Solutions of Embedded Elliptical Cracks Subjected to Uniaxial and Biaxial Loadings
• Functional Properties of Nanostructured Ti-50.0 at % Ni Alloys
• FDA Recommendations for Nitinol Stent and Endovascular Graft Fatigue Characterization and Fracture Reporting
• Development of a Fastener Structural Element Test for Certifying Navy Fastener Materials
• An Experimental and Numerical Study of the Fracture Strength of Welded Structural Hollow Section X-Joints
• Detection of Crack Initiation by Observations of Free Surface Condition
• Constraint Corrected J-R- Curve and Its Application to Fracture Assessment for X80 Pipelines
• Development of a Circumferentially Throughwall Cracked Tube Specimen for Fatigue Crack Growth Rate Tests
• Observations on Photo-Emission and the Process Zone of a Fatigue Crack
• Prediction of Failure in Existing Heart Valve Designs
• Study of Vacuum Carbon-Deoxidization of High Carbon Chromium Bearing Steel
• Cleanliness of Bearing Steels and Fatigue Life of Rolling Contacts
• New Development in Through Hardened Bearing Steel Grades for Use in Contaminated Lubrication
• Thermal Residual Stress Relaxation in Powder Metal IN100 Superalloy
• Modeling the Formation and Growth of Cracks from Cold-Worked Holes
• The Use of Digital Image Correlation to Verify the Behavior of Fiber Metal Laminate Cylinders under Torsional Loading
• Volumetric and Surface Positron Annihilation Studies of Fatigue Damage Accumulation in a Steel Alloy
• Application of the Reference Temperature to the Evaluation of Cleavage Fracture in HSLA-100 Steel
• Creep Crack Growth Predictions in Component Using a Damage Based Approach
• Creep Crack Growth Analysis of Welded Joints for High Cr Heat Resisting Steel
• Application of Low Plasticity Burnishing (LPB) to Improve the Fatigue Performance of Ti-6Al-4V Femoral Hip Stems
• Evaluation Procedures of Nonmetallic Inclusions in Steel for Highly Reliable Bearings
• Study on Flaking Process in Bearings by White Etching Area Generation
• Micro-Plastic Material Model and Residual Fields in Rolling Contacts
• Impact Fracture Behavior of Hollow Glass Bead-Filled ABS Composites
• Novel Applications of the Deep-Hole Drilling Technique for Measuring Through-Thickness Residual Stress Distributions
• Full-field Laser Shearography Instrumentation for the Detection and Characterization of Fatigue Cracks in Titanium 10-2-3
• The Development of Procedures for Charpy Impact Testing
• Influence of Cold Rolling Threads Before or After Heat Treatment on the Fatigue Resistance of High Strength Fine Thread Bolts for Multiple Preload Conditions
• Fatigue Strength in Presence of Inhomogeneities: Influence of Constraint
• The Effect of Large Strain Cycling on the Fatigue Strength of Welded Joint
• Mechanical Characterization of Cryogenically Treated Music Wire
• A Statistical Method to Assess the Reliability of Cleanness Measurements for High Quality Bearing Steels
• Performance Evaluation of “Duplex Hardened” Bearings for Advanced Turbine Engine Applications
• Different Approaches for the Verification of Force Values Measured with Instrumented Charpy Strikers
• Damping Behavior of AI6061/Albite MMCs
• Effect of Tightening Speed on Thread and Under-Head Coefficient of Friction
• Influence of Cold Rolling Threads Before or After Heat Treatment on the Fatigue Resistance of High Strength Coarse Thread Bolts for Multiple Preload Conditions
• 3D FEA Simulations to Assess Residual Stresses in Riveting Processes
• Analysis of Charpy Impact Verification Data: 1993–2003
• Anomalous Fatigue Crack Growth Data Generated Using the ASTM Standards
• Plasma Assisted Heat Treating Processes of Bearing Components
• Electrochemical Impedance Spectroscopy as a Tool for Studying Steel Corrosion Inhibition in Simulated Concrete Environments—Red Mud Used as Rebar Corrosion Inhibitor
• A Numerical Method for the Recovery of Local Potentials and Currents Due to Corrosion of Steel in Concrete
• Service Life Extension of Virginia Bridge Decks Afforded by Epoxy-Coated Reinforcement
• Use of Electrochemical Techniques to Assess Performance of Corrosion Protection Systems for Reinforced Concrete Structures—A Review
• The History of Instrumented Impact Testing
• International Comparison of Impact Reference Materials (2004)
• Simulation on the Decrease in Threshold Stress Intensity Factor (SIF) Range due to High Maximum SIF
• Analysis of Creep Crack Initiation and Growth in Different Geometries for 316H and Carbon Manganese Steels
• European Code of Practice for Creep Crack Initiation and Growth Testing of Industrially Relevant Specimens
• Prediction of Scatter in Creep Crack Growth Data from Creep Failure Strain Properties
• Trends in High Temperature Structural Integrity Assessment
• The Challenge of Multiple Particles in Extreme Value Inclusion Rating
• A Novel Method to Evaluate the Influence of Hydrogen on Fatigue Properties of High Strength Steels
• Comparison of Fatigue Performances of 32CrMoV13 and M50 Steels in Presence of Surface Indents
• Continued Developments in Easily Carburizable High Speed Steel Alloys
• Characterization of Wear and Surface Reaction Layer Formation on Aerospace Bearing Steel M50 and a Nitrogen-alloyed Stainless Steel
• Radioactivity Inspections Applied to the Steelmaking Industry
• Influence of Cold Rolling Threads Before or After Heat Treatment on High Strength Bolts for Different Fatigue Preload Conditions
• Surface Roughness, Quasi-Static Fracture, and Cyclic Fatigue Effects on GFRP- and CFRP-Concrete Bonded Interfaces
• Temperature Dependence and Variability of Fracture Toughness in the Transition Regime for A508 Grade 4N Pressure Vessel Steel
• Use of Miniaturized Compact Tension Specimens for Fracture Toughness Measurements in the Upper Shelf Regime
• Analysis of Dynamic Fracture and Crack Arrest of an HSLA Steel in an SE(T) Specimen
• Probabilistic Analysis of the Creep Crack Growth Rate of Type 316LN Stainless Steel by the Monte Carlo Simulation
• Modelling the Redistribution of Residual Stresses at Elevated Temperature in Components
• Structural Reliability Analysis of Railroad Tank Cars Subjected to Fatigue and Corrosion
• Load History Effects Resulting from Compression Precracking
• Uncertainty Analyses on Reference Values of Charpy Impact Test Specimens
• Reference Impact Specimens Made from Low Carbon Steel: Report on Production and Use
• The Mechanical Characterization of Low Work Hardening, High Strength Steel
• A Comparative Evaluation of Three Commercial Instruments for Field Measurements of Reinforcing Steel Corrosion Rates
• Efforts to Determine the Relationship Between Corrosion Rate and Concrete Damage Using Acoustic Emission
• A Design Methodology to Take Credit for Residual Stresses in Fatigue Limited Designs
• Characterization of Damage and Failure Mechanisms of Co-Cured Fiber-Reinforced Composite Joints under Quasi-Static, Tensile Loading
• Effects of Removing and Replacing an 8-MM Charpy Striker on Absorbed Energy
• Stress Analysis of Asymmetric Co-Cured Stepped-Lap Joints
• New Chemical Antistripping Additives for Bituminous Mixtures
• Use of ACR Method to Estimate Closure and Residual Stress Free Small Crack Growth Data
• Certification of Charpy V-Notch Reference Test Pieces at IRMM
• Impact Characterization of Sub-Size Charpy V-Notch Specimens Prepared from Full-Size Certified Reference Charpy V-Notch Test Pieces
• Size Effect of Microdamage Growth and Its Relation to Macro Fatigue Life
• The Effect of Load Reduction Scheme on Crack Closure in the Near-Threshold Regime
• Selection of Material for Welded Steel Structures Based on Fracture Mechanics
• Fractographic Reassessment of the Significance of Fatigue Crack Closure
• A New Method for Opening Load Determination from Compliance Measurements
• Assessment for Decrease in Threshold Stress Intensity Factor (SIF) Range Due to High Maximum SIF
• Notch-Root Elastic-Plastic Strain-Stress in Particulate Metal Matrix Composites Subjected to General Loading Conditions
• Assessment of Plane Stress Tearing in Terms of Various Crack Driving Parameters
• Residual Stress Measurements in Welded and Plastically Deformed Target Structural Materials
• Effect of Shot Peening on Fatigue Crack Growth in 7075-T7351
• Evaluation of Fatigue Crack Thresholds Using Various Experimental Methods
• Nanotechnology — An Introduction for the Standards Community
• Modeling of Three-Dimensional Effects on Fatigue Crack Closure Processes in Small-Scale Yielding
• Ultrasonic Fatigue Testing of Ti-6Al-4V
• Fretting Fatigue and Stress Relaxation Behaviors of Shot-Peened Ti-6Al-4V
• Crack Initiation, Propagation, and Arrest in 316L Model Pipe Components under Thermal Fatigue
• Simulation of Fatigue Crack Propagation in Railway Axles
• The Effect of Negative Stress Ratio Load History on High Cycle Fatigue Threshold
• Determining Nitriding Parameters with Neural Networks
• Predicting Fatigue Crack Growth in the Residual Stress Field of a Cold Worked Hole
• Stress Intensity Factor Analysis and Fatigue Behavior of a Crack in the Residual Stress Field of Welding
• Corrosion Behavior of Heat-Treated Duplex Stainless Steels in Saturated Carbon Dioxide-Chloride Solutions
• Interpretation of Material Hardness, Stress Ratio, and Crack Size Effects on the ΔK_th of Small Cracks Based on Crack Closure Measurement
• Analysis of Roughness-Induced Crack-Tip Shielding in Terms of Size Ratio Effect
• Influence of Crack-Surface Oxidation on Creep-Fatigue Crack Behavior of 1Cr- and 10Cr-Steels
• Temperature Dependent Fracture Toughness of a Single Crystal Nickel Superalloy
• Critical Assessment of the Standard ASTM E 399
• Effect of Residual Stresses on the Fatigue Crack Propagation in Welded Joints
• On the Constraint-Based Failure Assessment of Surface Cracked Plates under Biaxial Loading
• Construction of J-R Curves Using the Common and Concise Formats
• Environmentally Influenced Fatigue in High Strength Steels
• Characterization of Crack Length Measurement Methods for Flat Fracture with Tunneling
• Correlation Between Strength and Measured Residual Stress in Tempered Glass Products
• A Method for Calculation of Fastener Torque Specifications Which Includes Statistical Tolerancing
• A Procedure for Calculation of Torque Specifications for Bolted Joints with Prevailing Torque
• Differentiation of Damage and Failure Mechanisms of Co-Cured Fiber-Reinforced Composite Joints Using Acoustic Emission
• Evaluation of the Effect of Crack Tip Constraint on Fatigue Crack Growth Rate in Inconel 718
• Effect of Periodic Overloads on Threshold Fatigue Crack Growth in Al-Alloys
• Evaluation of the Effect of Biaxial Loading on the T_o Reference Temperature Using a Cruciform Specimen Geometry
• Fatigue Crack Growth Rate and Stress-Intensity Factor Corrections for Out-of-Plane Crack Growth
• Sensitivity of Creep Crack Initiation and Growth in Plates to Material Properties Variations
• Microstructural Influences on the Development and Growth of Small Fatigue Cracks in the Near Threshold Regime
• Effect of Heat Treatment on the Mechanical Properties of ASTM A 890 Gr6A Super Duplex Stainless Steel
• Variations in the Mechanical Strength of a Composite Material of Thermoplastic Matrix Reinforced with Woven Glass-Fabric After Being Submitted to Diverse Damage Sequences: A Statistical Analysis
• Principles of Variable Amplitude Fatigue Design and Testing
• Validation of Complex Wheel/Hub Subassemblies by Multiaxial Laboratory Tests Using Standardized Load Files
• A Framework for a Standardization Effort for Fatigue Crack Growth Testing Under Variable Amplitude Spectrum Loading
• Variable Amplitude Loading on a Resonance Test Facility
• Life Prediction by Observation and Simulation of Short Crack Behavior in a Low Carbon Steel
• Large Commercial Aircraft Loading Spectra: Overview and State of the Art
• Fatigue Reliability Analysis of an Overload Effect in Welded Joints Including Crack Initiation and Plastic Zone as Random Variables
• Periodic Overloads in the Near Threshold Regime
• Overload Effects in Aluminum Alloys: Influence of Plasticity and Environment
• Multi-Mechanism Synergy in Variable-Amplitude Fatigue
• Load History in Fatigue: Effect of Strain Amplitude and Loading Path
• The Macro-Microscopic Numerical Simulation of the Mechanical Behavior of CFCC with Matrix Anisotropic Damage by Homogenization Method
• Spectrum Fatigue Testing and Small-Crack Life Prediction Analysis on a Coupon Similar to a Critical Design Detail of a CF188 Hornet Component
• Variable Amplitude Fatigue Crack Growth Using Digital Signal Processing Technology
• Development of a DCPD Calibration for Evaluation of Crack Growth in Corner-Notched, Open-Hole Specimens
• A Model for the Inclusion of Notch Plasticity Effects in Fatigue Crack Growth Analysis
• Study on Fatigue Design Loads for Ships Based on Crack Growth Analysis
• High Cycle Fatigue Testing and Analysis Using Car Standard Sequence
• Fuzzy Probabilistic Assessment of Aging Aircraft Structures Subjected to Multiple Site Fatigue Damage
• Effect of Overloads and Underloads on Fatigue Crack Growth and Interaction Effects
• Calculation of Stress Intensity Factors for Cracks in Structural and Mechanical Components Subjected to Complex Stress Fields
• Crack Initiation at a Notch under Constant and Selected Variable Amplitude Loading Conditions
• The Prediction of Fatigue Life Distributions from the Analysis of Plain Specimen Data
• Probabilistic Fatigue: Computational Simulation
• A Software Framework for Probabilistic Fatigue Life Assessment of Gas Turbine Engine Rotors
• Extension of a Microstructure-Based Fatigue Crack Growth Model for Predicting Fatigue Life Variability
• Fatigue Life Variability Prediction Based on Crack Forming Inclusions in a High Strength Alloy Steel
• Corrosion Risk Assessment of Aircraft Structures
• A Methodology for Assessing Fatigue Crack Growth Reliability of Railroad Tank Cars
• Application of Probabilistic Fracture Mechanics in Structural Design of Magnet Component Parts Operating Under Cyclic Loads at Cryogenic Temperatures
• Effect of Individual Component Life Distribution on Engine Life Prediction
• Predicting the Reliability of Ceramics Under Transient Loads and Temperatures with CARES/Life
• High Cycle Variable Amplitude Fatigue of a Nodular Cast Iron
• Effect of Transient Loads on Fatigue Crack Growth in Solution Treated and Aged Ti-62222 at −54, 25, and 175°C
• On the Causes of Deviation from the Palmgren-Miner Rule
• Prediction of Crack Growth Under Variable-Amplitude and Spectrum Loading in a Titanium Alloy
• Crack Growth and Closure Behavior of Short and Long Fatigue Cracks under Random Loading
• Degradation Parameters and Two-Stress Block Fatigue of Angle-Ply Carbon Fiber Reinforced Epoxy
• Comparison of the Rain Flow Algorithm and the Spectral Method for Fatigue Life Determination Under Uniaxial and Multiaxial Random Loading
• Spectrum Coupon Testing of Fatigue-Resistant Fasteners for an Aging Military Aircraft
• Fatigue Life of a SG Cast Iron under Real Loading Spectra: Effect of the Correlation Factor Between Bending and Torsion
• Comparisons of Analytical Crack Closure Models and Experimental Results Under Flight Spectrum Loading
• A Simple Methodology For Determining Electrical Conductivity of Soils
• Application of Moire Interferometry for Mode II Testing of Stitched Composites
• A Test Method to Determine the Fiber and Void Contents of Carbon/Glass Hybrid Composites
• Probabilistic Life Prediction Isn't as Easy as It Looks
• Modeling Variability in Service Loading Spectra
• Scatter in Fatigue Crack Growth Rate in a Directionally Solidified Nickel-Base Superalloy
• Mechanism-Based Variability in Fatigue Life of Ti-6Al-2Sn-4Zr-6Mo
• Predicting Fatigue Life Under Spectrum Loading in 2024-T3 Aluminum Using a Measured Initial Flaw Size Distribution
• Transition Toughness Modeling of Steels Since RKR
• A Physics-Based Predictive Model for Fracture Toughness Behavior
• Constraint Correction of Fracture Toughness CTOD for Fracture Performance Evaluation of Structural Components
• Sensitivity in Creep Crack Growth Predictions of Components Due to Variability in Deriving the Fracture Mechanics Parameter C*
• On the Identification of Critical Damage Mechanisms Parameters to Predict the Behavior of Charpy Specimens on the Upper Shelf
• Transferability Properties of Local Approach Modeling in the Ductile to Brittle Transition Region
• Interface Strength Evaluation of LSI Devices Using the Weibull Stress
• Image-Based Characterization and Finite Element Analysis of Porous SMA Behavior
• Computational Estimation of Multiaxial Yield Surface Using Microyield Percolation Analysis