SEDL / Topics / Medical, Health, Safety, and Forensic Science / All JAI

• Early Instability with Mobile Bearing Total Knee Arthroplasty: A Series of Twenty-Five Cases
• 31 Year Evolution of the Rotating-Platform Total Knee Replacment: Coping With “Spinout” and Wear
• Vertebrectomy Model for the Mechanical Assessment of Fusionless Scoliosis Growth Rods
• Kinematic Stability Evaluation of Spinal Fusion Devices by Synthetic FSU Model
• Wear Simulation of Total Disc Arthroplasties: Sensitivity to Device Design and Test Parameters
• The Use of a Single-Level Construct Model to Evaluate Nonmetallic “Flexible” Rods
• Symposium on Static and Dynamic Spinal Implants: Are We Evaluating Them Appropriately? Effect of Tightening Torque on ASTM F1798 Axial Gripping Capacity
• A Method to Test Anterior-Posterior Construct Shear Fatigue Based on the Vertebrectomy Model
• ASTM F2624—Evaluating Alternate Fixtures for Flexion/Extention, Lateral Bending, and Axial Rotation Testing of Extra Discal Motion Preserving Implants
• Clinical Results of a Total Knee Prosthesis with Floating Platform at 5.5 Years
• Standard Testing Methods for Mobile Bearing Knees
• Wear of Mobile Bearing Knees: Is It Necessarily Less?
• Comparison of Two Bone Surrogates for Interbody Device Subsidence Testing
• Comparison of Daily Motion of the Cervical and Lumbar Spine to ASTM F2423-11 and ISO 18192-1.2011 Standard Testing
• In-Vitro Wear and Radiographic Analyses of High Flexion Posterior Stabilized Mobile- and Fixed-Bearing Knee Implants
• Mobility and Contact Mechanics of a Rotating Platform Total Knee Replacement
• Primary Stability of a Dynamic Artificial Disc Tested in a Human Cadaveric Model
• The Incidence of Anterior Knee Pain and Crepitation After Total Knee Replacement: A Matched Pair Analysis between Rotating Platform and Fixed Bearing Posterior Stabilized Designs
• Utilizing Validated Computational Models to Predict Tibial Insert Abrasion in Mobile Bearing Knees: A Design Performance Standard
• Static Evaluation of Pedicle Screw Spinal Constructs to the ASTM Standard: A Comparison of Multiple Test Laboratories
• Development of a More Physiological Loading Protocol for Spine In Vitro Flexibility Testing
• Biomechanical Cyclical Loading on Cadaveric Cervical Spines in a Corpectomy Model
• Comparison of Self-Drilling and Self-Tapping Cervical Spine Screws Using ASTM F543-07
• Fixture Variations When Evaluating ASTM F1717 Construct Stiffness: Pin Diameter and Material
• How Frequency Affects Fatigue Testing of an Artificial Disc With a Viscoelastic Polymer Core
• In Vitro Knee Wear, Kinematics, and Particle Morphology Among Different Bearing Geometries in a Mobile Bearing Knee System
• Derivation of Clinically Relevant Boundary Conditions Suitable for Evaluation of Chronic Impingement of Lumbar Total Disk Replacement: Application to Standard Development
• The Contribution of Mobile Bearing Knee Design in Optimizing Tibial Rotation in Total Knee Arthroplasty
• Wear Rate in a Series of Retrieved RP Knee Bearings
• Wear Advantage of a Rotating Bearing Knee–An In Vitro Study
• Damage and Wear: An Important Distinction in Rotating Platform Knee Bearings
• Comparison of Mobile Bearing and Fixed Bearing Total Knee Arthroplasty Outcomes: A Review of the Literature
• Wear of a Mobile Bearing Uni-Compartmental Knee Replacement Prosthesis: A Comparison of In Vitro and In Vivo Wear Rates
• Helmet Use and Self-Reported Risk Taking in Skiing and Snowboarding
• Hydration Packs Modify Professional Skiers Hydration Levels in All Day Skiing: A Randomized Controlled Trial
• Evaluating the Performance of Helmet Linings Incorporating Fluid Channels
• Polarizing Filters in Ski Sports
• Jumper Kinematics on Terrain Park Jumps: Relationship between Takeoff Speed and Distance Traveled
• Emergency Release for Winter Sports Equipment
• Reaction Forces and Moments in Carved Turns
• Reaction Times of Skiers and Snowboarders
• Skiing and Snowboarding Injuries in the Czech Republic in Winter Seasons 2003–2008
• Relative Motion of ACL Insertion Points In Vivo: A Case Study, Including Skiing Maneuvers
• Gender-Specific Effects of Smoking and Alcohol Consumption on the Risk of Falling in Downhill Skiers
• Analyzing the Riding Behavior of Recreational Skiers and Snowboarders
• Retention Requirements for Alpine Ski Bindings
• Skiing and Boarding Injuries on Norwegian Slopes during Two Winter Seasons
• Aging Trends in Alpine Skiing
• Are ACL Injuries Related to Perceived Fatigue in Female Skiers?
• An Analysis of Head Impact Profiles and Safe Hockey Behaviors in Youth Hockey Players
• Acute Care in Cervical Spinal Cord Trauma with Long-Term Benefit: A Review
• Measuring Athlete Exposure and Body Contact Using Time-on-Task Technology in Ice Hockey
• Experimental Characterization of Ice Hockey Pucks and Sticks
• In situ Measures of Head Impact Acceleration in NCAA Division I Men’s Ice Hockey: Implications for ASTM F1045 and Other Ice Hockey Helmet Standards
• Relationships among Risk Factors for Concussion in Minor Ice Hockey
• Preliminary Evaluation of Selected Hockey Equipment Tested according to EN TS15256: Protective Clothing—Hand, Arm, Leg, Genital, and Neck Protectors for Use in Ice Hockey—Protectors for Players Other than Goalkeepers—Requirements and Test Methods
• Hockey Education Program (HEP): A Statewide Measure of Fair Play, Skill Development, and Coaching Excellence
• Analysis of the Impact Performance of Ice Hockey Helmets Using Two Different Test Methodologies
• Concussion in Youth Hockey: Prevalence, Risk Factors, and Management across Observation Strategies
• A Prospective Study of Injuries in NCAA Intercollegiate Ice-Hockey Goaltenders
• Ice Hockey Facility Safety: Litigated Case Studies Involving Ice Hockey Injuries
• When Metal Meets Ice: Potential for Performance or Injury
• Translational and Rotational Accelerations Generated During Reconstructed Ice Hockey Impacts on a Hybrid III Head Form
• Potential Risk Factors for Knee Injuries in Alpine Skiers
• Ski Bindings and Lower Leg Injuries, A Case Control Study in Flaine, 2006
• Safer Ski Jump Landing Surface Design Limits Normal Impact Velocity
• A Comparison of Peak Linear and Angular Headform Accelerations Using Ice Hockey Helmets
• Development of a new methodology capable of characterizing the contribution of a controlled venting system to impact attenuation in chamber structures for head protection
• Does Laterality Exist in ACL Injury Prevalence in Alpine Skiers?
• Do Helmets Reduce Fatalities or Merely Alter the Patterns of Death?
• A Synthesis of the World Literature of Ice Hockey Injuries: Epidemiologic Principles and Future Directions
• Warnings and Instructions: One of Three Legs on Ice Hockey’s Safety Stool
• Update on Injury Trends in Alpine Skiing
• The Importance of an Objective Assessment to Identify Functional Constraints of Young Skier Athletes
• Safety in Big Jumps: Relationship Between Landing Shape and Impact Energy Determined by Computer Simulation
• Computer Simulation of Consecutive Ski Turns
• A Longitudinal Study of Ice Hockey Helmet Shelf Life
• Review of Research Literature on Snowboarding Injuries as Might Relate to an Adjustable/Releasable Snowboard Binding
• Skiing and Snowboarding Injuries in Greece: A Two-Year Case-Control Study
• Head Kinematics During Experimental Snowboard Falls: Implications for Snow Helmet Standards
• Injuries in Norwegian Ski Resorts the Winter Seasons of 2005 and 2006
• Tabletop Jumping: Engineering Analysis of Trajectory and Landing Impact
• Injury Trends in Norwegian Ski Resorts in the 10 Year Period 1996–2006
• Correlative Study into Injury Epidemiology, Use of Protective Equipment and Risk Taking Among Adolescent Participants in Alpine Snow Sports
• A Novel Anti-Slip Pad for Improving Steering when Exiting a Ski Lift on a Snowboard
• Behaviors and Attitudes Towards Snowsport Safety in Australia
• Wear Scar Prediction Based on Wear Simulator Input Data—A Preliminary Artificial Neural Network Approach
• A Tracer Method to Determine Extremely Low Wear Rates of Ultrahigh Molecular Weight Polyethylene
• The Effects of Load Soak Control on the Wear of UHMWPE at Various Hydration Levels in a Joint Simulation Study
• A Simulator Study of TKR Kinematics Using Modeled Soft-Tissue Constraint: Virtual Soft-Tissue Control for Knee Simulation
• Load Profile and Fluid Composition Influence the Soak Behavior of UHMWPE Implants
• Differences of the Mechanical Setup of Hip Simulators and Their Consequences on the Outcome of Hip Wear Testing
• Injuries in Norwegian Ski Resorts 2002 – 2004
• Industrial Cleaning of Implants: Performance Validation of Cleaning Scheme
• Experimental Measurement of Selected Snowboard Mechanical Properties
• Slip Velocity Direction Impacts Wear in Total Knee Arthropolasty
• Computational Wear Prediction of UHMWPE in Knee Replacements
• Functional and Release Characteristics of Alpine Ski Equipment
• Lisfranc Ligament Injuries in Windsurfers
• Retrieval Analysis of Total Disc Replacements: Implications for Standardized Wear Testing
• Estimation of the Osteolytic Potential of Noncrosslinked and Crosslinked Polyethylenes and Ceramic-on-Ceramic Total Hip Prostheses
• The Effects of Implant Temperature on Lubricant Protein Precipitation and Polyethylene Wear in Joint Simulation Studies
• Comparison of the Corrosion Fatigue Characteristics of 23Mn-21Cr-1Mo Low Nickel, 22Cr-13Ni-5Mn, and 18Cr-14Ni-2.5Mo Stainless Steels
• Residue Analysis on Implants
• Validation of a Gravimetric Procedure for Recovery of Processing Materials from Porous Coated Metal Implants
• On Piste Fatalities in Recreational Snow Sports in the U.S
• Sports Activity after Total Knee Arthroplasty
• Observational Study on Fall Trends in Snowboarders
• Parameters in Ultrasonic Cleaning for Implants and Other Critical Devices
• Surface Texture Analysis of Artificial Disks Wear-Tested under Different Conditions and Comparison to a Retrieved Implant
• Head Injury in Snowboarding: Evaluating the Protective Role of Helmets
• Plasma Cleaning of a Commercially Available Hydroxyapatite-Coated External Fixation Pin by the Radio Frequency Glow Discharge Technique
• Analytical Methods and Acceptance Criteria for Cleaning Validation Protocols for Medical Devices
• Survey of Orthopedic Implant Cleanliness Test Methods
• Radio Frequency Plasma Treatment of PEEK Spinal Implants
• Arthroscopic Treatment of the First Anterior Shoulder Dislocation in Young Skiers
• ASTM Activities for Assessing Cleanliness of Medical Devices
• Cleanliness Testing and Identification of Residues on Polymer Medical Devices
• Tribological Behavior and Corrosion Resistance of Kolsterized AISI316L Austenitic Stainless Steel: Existing Applications in the Automotive Industry
• The Case for a Voluntary National Healthcare Identifier
• Reduce the Injuries, Change the Culture: Insights from Telemarking
• Zirconium and Niobium Affect Human Osteoblasts, Fibroblasts, and Lymphocytes in a Similar Manner to More Traditional Implant Alloy Metals
• Metallurgical Attachment of a Porous Tantalum Foam to a Titanium Substrate for Orthopedic Applications
• Corrosion of Modular Titanium Alloy Stems in Cementless Hip Replacement
• An Attempt to Predict a Risk of Some of the Knee Region Ski Injuries by Means of Computer Simulations
• Methods for Improving the Efficiency of Alpine Ski Equipment Rental Operations
• Beta Titanium Alloy Processed for High Strength Orthopedic Applications
• Corrosion Resistance, Mechanical Properties, Fatigue Properties, and Tissue Response of Ti-15Zr-4Nb-4Ta Alloy
• Comparison of Stress Corrosion Cracking Characteristics of CP Ti, Ti-6Al-7Nb, Ti-6Al-4V, and Ti-15Mo
• Comparative Evaluations of Surface Characteristics of cp Titanium, Ti-6AI-4V and Ti-15Mo-2.8Nb-0.2Si (Timetal® 21SRx)
• Mechanical and Physical Properties of Titanium-12Molybdenum-6Zirconium-2Iron Beta Titanium Alloy
• Influence of Oxygen Content on the Mechanical Properties of Titanium-35Niobium-7Zirconium-5Tantalum Beta Titanium Alloy
• Effect of Aging Treatments on the Tensile Properties of Ti-35Nb-7Zr-5Ta-(0.06–0.7)O Alloys
• The Application of Ti-15Mo Beta Titanium Alloy in High Strength Structural Orthopaedic Applications
• How Fast Do Winter Sports Participants Travel on Alpine Slopes?
• Using Signal Detection Theory as a Model to Evaluate Release/Retention Criteria in Alpine Skiing
• Creation of Oxidized Zirconium Orthopaedic Implants
• Effect of Surface Reaction Layer on Three-Point Flexure Bond Strength of Resin Composite to Cast Ti and Ti-6Al-7Nb
• Comparison of the Corrosion Fatigue Characteristics of CP Ti-Grade 4, Ti-6Al-4V ELI, Ti-6Al-7Nb, and Ti-15Mo
• Comparison of Stress Corrosion Cracking and Corrosion Fatigue (Anodized and Non-Anodized Grade 4 CP Ti)
• Influence of Exposure Conditions on Bacterial Adhesion to Zirconium Alloys
• A Methodology to Fabricate Titanium and Stainless Steel Wear Debris for Experimental Use: A Comparison of Size, Shape, and Chemistry
• Fatigue Testing of Bone Cements — Comparison of Testing Arrangements
• Mechanical Properties of Cast Ti-Fe-O-N Alloys
• Super Elastic Functional β Titanium Alloy with Low Young's Modulus for Biomedical Applications
• Injury Rates and Injury Types in Alpine Skiing, Telemarking, and Snowboarding
• Winter Sports in an Indoor Facility—Accident and Injury Trends
• Contrast Enhancing Filters in Ski Sports
• Skiboard Injuries—A Three-Year Comparison with Alpine Skiing
• Validated Microstructural Assessment of Femoral Heads
• Intimidation in Ice Hockey: An Exploratory Assessment
• The Power of the Denominator: A Proposal for More Comprehensive Modeling of Risk Factors in Ice Hockey Injuries
• Measuring the Effects of Initiating Body Checking at the Atom Age Level
• Psychophysiologic Factors and Performance in Ice Hockey Goalies During Competition
• Generalized Size and Shape Description of UHMWPE Wear Debris — A Comparison of Cross-Linked, Enhanced Fused, and Standard Polyethylene Particles
• Development of a Model for Testing Third Body Wear of UHMWPE Acetabular Components
• The Effects of Raw Material, Irradiation Dose, and Irradiation Source on Crosslinking of UHMWPE
• Multiaxial Fatigue Behavior of Oxidized and Unoxidized UHMWPE During Cyclic Small Punch Testing at Body Temperature
• Measurement of Pore Size and Porosity of Tissue Scaffolds
• Is There a Need for TEMP Standards? A Perspective from a Biomaterials Manufacturer
• Biomolecules in Tissue Engineered Medical Products (TEMPs): A Case Study of Recombinant Human Bone Morphogenetic Protein-2 (rhBMP-2)
• Wear and Structural Fatigue Simulation of Crosslinked Ultra-High Molecular Weight Polyethylene for Hip and Knee Bearing Applications
• Comparative Study of Bone Cell Culture Methods for Tissue Engineering Applications