SEDL / Topics / General Technology / All JAI

• N-Class Fire Resistant Divisions in U.S. Naval Ships
• Using Directional Flame Thermometers for Measuring Thermal Exposure
• Fire Performance Testing of Building Element Interfaces and Connections
• Measuring Properties for Material Decomposition Modeling
• Predicting Fire Behavior of Composite CFT Columns Using Fundamental Section Behavior
• Comparisons of Temperature and Heat Flux in Furnaces Controlled by Different Types of Temperature Sensors
• Promoted Ignition-Combustion Behavior of Cobalt and Nickel Alloys in Oxygen-Enriched Atmospheres
• Verification of the ASTM G-124 Purge Equation
• Ignition of Contaminated Aluminum by Impact in Liquid Oxygen—Influence of Oxygen Purity
• Advanced Crew Escape Suits (ACES) Particle Impact Test
• Identification and Quantification of Combustion Products Released by Non-Metallic Materials Used for Medical Oxygen Equipment
• Oxygen Fire Hazards in Valve-Integrated Pressure Regulators for Medical Oxygen
• An Approach to Understanding Flow Friction Ignition: A Computational Fluid Dynamics (CFD) Study on Temperature Development of High-Pressure Oxygen Flow Inside Micron-Scale Seal Cracks
• Good Practices for Avoiding Fires in Steel Mill Oxygen Systems
• Determination of Time Required for Materials Exposed to Oxygen to Return to Reduced Flammability
• Liquid Oxygen Rotating Friction Ignition Testing of Aluminum and Titanium with Monel^® and Inconel^® for Rocket Engine Propulsion System Contamination Investigation
• Determination of Burn Criterion for Promoted Combustion Testing
• Keynote—Materials Selection for Oxidizer Service—Successes and Challenges
• Chlorine Trifluoride Exposure Testing and Oxidizer Reactivity Results
• Sealed Aluminum Cavity Reactions when Submerged in Pure O₂ Reboiler Sump
• Oxygen Compatibility of Brass-Filled PTFE Compared to Commonly Used Fluorinated Polymers for Oxygen Systems
• Ignition Sensitivity of Nonmetallic Materials in Oxygen-Enriched Air (NITROX): A Never Ending Story in SCUBA Diving?
• Cone Calorimeter—A Cautionary Tale
• Electrical Arc Ignition Testing for Common Handheld Electrical Devices in Oxygen-Enriched Atmosphere
• High Pressure Quick Disconnect Particle Impact Tests
• Test Method for Quantifying the Ignitability of Metallic Materials
• Adiabatic Compression Testing—Part II: Background and Approach to Estimating Severity of Test Methodology
• Promoted Ignition Testing of Metallic Filters in High-Pressure Oxygen
• Adiabatic Compression Testing—Part I: Historical Development and Evaluation of Fluid Dynamic Processes Including Shock-Wave Considerations
• The Importance of Quality Assurance and Batch Testing on Nonmetallic Materials Used for Oxygen Service
• Tribocharging of Particle Contaminants Evaluated as an Ignition Source in Oxygen-Enriched Environments
• Defining the Flammability of Cylindrical Metal Rods Through Characterization of the Thermal Effects of the Ignition Promoter
• Guidelines for Improving the Standard Fire Resistance Test Specifications
• Effect of Oxygen Concentration on Autogenous Ignition Temperature and Pneumatic Impact Ignitability of Nonmetallic Materials
• Vacuum Superinsulated Liquid Oxygen Piping and Vessels
• The Rate-Limiting Mechanism for the Heterogeneous Burning of Cylindrical Iron Rods
• A Proposed Qualitative Framework for Heterogeneous Burning of Metallic Materials: The “Melting Rate Triangle”
• Guide on Measuring Uniformity of Furnace Exposure on Specimens Representing Test Samples Used to Determine Fire Resistance Ratings
• A Materials Science-Based Approach to Characterizing Fire Resistive Materials
• Heat Release Testing of Consumer Products
• A History of Fire Testing: Past, Present, and Future
• Experimental Studies on Coupled Treatment of Chromite Ore Processing Residue
• Natural Attenuation of Endocrine Disrupting Chemicals in On-Site Domestic Wastewater Treatment Systems
• Effect of Contaminated Suspended Solids on Water and Sediment Qualities and Their Treatment
• Fast Scan Differential Scanning Calorimetry Distinguishes Melting, Melting-Degradation/Sublimation and Thermal Stability of Drugs
• Thermal and Oxidative Properties of Physiologically Relevant Free Fatty Acids by Dielectric Analysis and Differential Scanning Calorimetry
• An Application of Thermal Analysis to Household Waste
• Flow Friction Fire History and Research
• Ignition of Metals at High Temperatures in Oxygen
• Proactive Mitigation of PCTFE-Related Ignition Hazards in Oxygen Systems: I. Development of a Voluntary Consensus Standard Specification to Control Property Variation in Finished PCTFE Parts
• Proactive Mitigation of PCTFE-Related Ignition Hazards in Oxygen Systems: II. Testing of Inventoried “At-Risk” PCTFE Parts and Hazard Analyses of Corresponding Ground Service Equipment at the Kennedy Space Center
• Small-Building Defense Against Terrorism 016
• Mechanical Impact Testing: Data Review and Analysis
• Electrical Arc Ignition Testing of Spacesuit Materials
• Pneumatic Impact Ignition of Sebum Oil Film in High-Pressure Oxygen
• ASTM G 175 Interlaboratory Study on Forced Ignition Testing
• Oxygen Compatibility Assessment on Components and Systems
• Frictional Ignition Testing of Composite Materials
• Oxygen Fires in Aluminum Alloy Cylinders
• Promoted Metals Combustion at Ambient and Elevated Temperatures
• Fires in P-3 Aircraft Oxygen Systems
• Gravimetric Analysis of the Nonvolatile Residue from an Evaporated Droplet, Using the Quartz Crystal Microbalance/Heat Conduction Calorimeter
• Ignition of a Composite Cylinder with Plastic Liner
• Combustion Tests Under High Pressure Oxygen: Promoted Ignition Combustion Test Versus Metallic Disk Ignition Test
• Mechanical Impact of Aluminum Alloy Gas Cylinder Pressurized with Oxygen
• Surface Ignition of Aluminum in Oxygen
• Analysis Tools Used to Evaluate Oxygen Hazards and the Oxygen Compatibility of Metals
• Proficiency Testing for Evaluating Aerospace Materials Test Anomalies
• Investigation of Oxygen-Acetylene Flashback Reactions in Welding Hoses
• Materials Compatibility with Nitrogen Trifluoride (NF₃)
• A Metallurgist's Views on the Selection of Engineering Alloys for Applications Involving Oxygen-Enriched Atmospheres: Keynote Address
• International Standards for Blast Resistant Glazing
• Twelve Common Deficiencies Found during Firestopping Inspections
• Promoted Combustion Testing of Pure and Ceramic-Coated Metals in High Pressure Oxygen by the Federal Institute of Materials Research and Testing (BAM)
• Promoted Ignition of a Cylinder Valve in NF₃
• Filtration of Gaseous or Liquid Oxygen in Industrial Applications and Associated Fire Risks
• Review, Analysis, and Hazard Mitigation of the Life-Support Oxygen System on Royal Australian Air Force P-3 Orion Aircraft
• Effect of Sample Geometry on Regression Rate of the Melting Interface for Carbon Steel Burned in Oxygen
• An Investigation of Regression Rate of the Melting Interface for Iron Burning in Normal Gravity and Reduced Gravity
• The Adiabatic Compression Test for Type Approval of Components — History and Final Test Protocol
• The Oxygen Index of Surgical Drape Materials
• A Thermal Analysis Method for Measuring Polymer Flammability
• Externally Insulated (“EIFS”) Building Walls: Security Characteristics and Methods of Enhancing Security Performance
• Ignition of Combustion Modified Polyurethane Foam
• Comparison of Carbon Dioxide and Helium as Fire Extinguishing Agents for Spacecraft
• Characterization Of Epoxy Curing Using High Heating Rate DSC
• Photo Thermal Micro-Spectroscopy — A New Method for Infared Analysis of Materials
• SED Method of Measuring Yield Strength of Adhesives and Other Materials
• Development and Evaluation of a TG/DTA/Raman System
• Quantitative Mass Measurements from Mass Spectrometer Trend Data in a TG/MS System
• A New Low Cost Method For Measuring the Viscoelastic Behavior of Adhesives
• Advanced Methods of Coating Adhesion Testing
• Selection of Alternatives to Liquid-in-Glass Thermometers
• Method for Quantifying Percentage Wood Failure in Block-Shear Specimens by a Laser Scanning Profilometer
• New Technique for Measuring Extended Viscosity Ranges - Gel Times, Pot Life, or Cure Monitoring - with Programmable Rotational Viscometers or Rheometers
• Aging & Environmental Exposure Properties of a Fire Protection Material
• Use of a TG/DTA/Raman System to Monitor Dehydration and Phase Conversions
• Protective Window Safety Films: A Case Study in ASTM All-Hazard Building Code Standards
• Adhesive Bonding and Performance Testing of Bonded Wood Products
• Characterizing Dynamic Fracture Behavior of Adhesive Joints under Quasi-Static and Impact Loading
• The Study of Bond Strength and Bond Durability of Reactive Powder Concrete
• The Development and Use of Perimeter Joint Protection Testing
• Characterization and Analytical Application of the Ion-Association Complex of Nickel with Alizarin Yellow R and Eosin
• Interfacial Diffusion of Fluids in Pressure Sensitive Adhesives
• Dynamic Modelling and Simulation of Squirrel-Cage Asynchronous Machine with Non-Linear Effects
• Fracture Mechanics Applied to Adhesive Joints
• Evaluation of Different Techniques for Adhesive Properties of Asphalt-Filler Systems at Interfacial Region
• Separation of Overlapping Processes from TGA Data and Verification by EGA
• Data Security Issues Relating to End of Life Equipment
• Simplified Thermal Analysis of Asynchronous Machine
• The Role of TGA-DTA in the Initial Evaluation of the Solid State Forms for Pharmaceutical New Chemical Entities, Part 1: Evaluation of Pure Forms
• The Role of TGA-DTA in the Initial Evaluation of the Solid State Forms for Pharmaceutical New Chemical Entities, Part 2: Evaluation of Mixed Forms
• Investigation of Burning Aluminum in Oxygen-Enriched Atmospheres through Microanalysis Techniques
• The Technical Foundations of a Unified Adjusted Reference Temperature for RPV Fracture Toughness
• Erratum/Correction to: Investigation of Burning Iron in Oxygen-Enriched Atmospheres through Microanalysis Techniques
• Calibration and Testing of On-Line Coal Analyzers
• Fiber-Matrix Adhesion Measured By the Micro-Indentation Test: Data Reduction Based On Real Time Simulation