SEDL / Topics / Environmental Science and Technology / All JAI

• Assessment of the Bacterial Contamination and Remediation Efficacy After Flooding Using Fluorometric Detection
• The Feasibility of Studying the Health Implications of Surface Beryllium Contamination: A Review of Eight Industries
• Surface Characterization of Replicate Wood Surfaces for Cleaning Studies
• Evaluation of a Modified Guar OD Formulation for Spray Drift Mitigation
• Novel Alkyl Polyglucoside Surfactant Derivatives for Improving the Infiltration of Irrigation Water into Repellent Soil
• Application of ASTM Standard Practice D6602 in the Investigation of Outdoor Environmental Surface Particulate Including Darkening Agents
• Beryllium Measurement by Optical Fluorescence in Samples Contaminated by Strongly Fluorescent Impurities
• Improving the Confidence Level in Lead Clearance Examination Results through Modifications to Dust Sampling Protocols
• Developing Acceptable Surface Limits for Occupational Exposure to Pharmaceutical Substances
• Use of the ASTM Inter-Laboratory Studies (ILS) Program in Developing Precision Data for ASTM D5755 – Asbestos in Dust by Microvacuum Sampling
• Round-Robin Evaluation of ASTM Standard Test Method E2798 for Spray Drift Reduction Adjuvants
• Approaches towards Design of Green Matrices to Formulate Agricultural and Bio-active Materials and Provide Improved Efficacy
• Screening of Spill and Leakage of Antibiotics in Hospital Wards
• Use of Direct Reading Surface Sampling Methods for Site Characterization and Remediation of Methamphetamine Contaminated Properties
• Indoor Allergen Surface Sampling Methods and Standards: A Review of the Theory and the Practice
• Development of a Method for Screening Spill and Leakage of Antibiotics on Surfaces Based on Wipe Sampling and HPLC-MS/MS Analysis
• Derivation of Health-Based Screening Levels for Evaluating Indoor Surface Contamination
• Review of Standards for Surface and Dermal Sampling
• A New Environmentally Friendly Solvent of Low Toxicity for Crop Protection Formulations
• Novel Formulations of an Organic Acid Herbicide
• Field Scale Evaluation of Spray Drift Reduction Technologies from Ground and Aerial Application Systems
• Evaluation of Asbestos in Dust on Surfaces by Micro-Vacuum and Wipe Sampling
• Handwipe Method for Removing Lead from Skin
• A Test Method for Evaluating Water Conditioning Adjuvants
• Evaluation of a Handwipe Disclosing Method for Lead
• Effects of Air Speed and Liquid Temperature on Droplet Size
• Development of Botanical Pesticides for Public Health
• Emulsification Performance Used for NPE Replacement in Solvent-Based Formulations
• Pilot Evaluation for Lead-Based Paint Proficiency Testing of Field Portable XRF Instruments
• Development of Two Sample Preparation Methods for Determination of Lead in Composite Dust Wipe Samples
• Beryllium Measurement in Commercially Available Wet Wipes
• WG and WP Formulations of Captan with Polymeric Surfactants
• A Fluorescent Tracer Method for Evaluating Spray Transport and Fate of Field and Laboratory Spray Applications
• Improving Formulations for Biopesticides: Enhanced UV Protection for Beneficial Microbes
• After 30 Years, How ASTM E35.22 and Gandy Company Have Survived Change
• Assessment of Oil Dispersion Pesticide Formulations Using Rheology and Near Infrared Centrifugation Techniques
• Modeling the Spray Atomization of Emulsion Embedded Agricultural Solutions
• Validation Testing of Drift Reduction Technology Testing Protocol
• Development of a Novel Solvent-Based Formulation for Pesticides That Are Prone to Crystallization
• Application of New Solid Polymeric Dispersant, Easy-Sperse® P-20 (Spray-Dried Polymer Composites) in Suspension Concentrates and Water Dispersible Granule Formulations—Improvement in Suspensibility and Rain-fastnesss
• OD Formulations Structured with Self-Activating Organically Modified Clays
• Joint Inerts Task Force: Partnership of Suppliers and Registrants to Defend Inert Ingredients within United States Regulatory System
• Spray Drift Reduction Evaluations of Spray Nozzles Using a Standardized Testing Protocol
• Simulating and Characterizing Agricultural Ground Applications for Soil VOC Deposition Studies
• Chemical Clustering for Risk Assessment: Fatty Alcohol Alkoxylates
• Granular Formulations and Active Ingredient Distribution from a Rotary Spreader
• Spray Drift Reduction Technology Adjuvant Evaluation
• Spray Solution pH and Glyphosate Activity
• Analysis of Impact of Various Factors on Downwind Deposition Using a Simulation Method
• Evaluation of Spray Drift Using Low-Speed Wind Tunnel Measurements and Dispersion Modeling
• Effect of Hard Water and Ammonium Sulfate on Weak Acid Herbicide Activity
• EW Formulations Using Polymeric Surfactants
• A Predictive Solubility Tool for Pesticide Emulsifiable Concentrate Formulations
• Selection of Sequestering Agents Having Affinity for Calcium Ion for Stabilization of the Emulsifiable Concentrate Formulations
• Development and Testing of a Laboratory Spray Table Methodology to Bioassay Simulated Levels of Aerial Spray Drift
• Stabilization of Suspension Concentrate Formulations via Specialized Double-comb Polymers
• The Effect of Adjuvants, Pesticide Formulation, and Spray Nozzle Tips on Spray Droplet Size
• Imazapyr Absorption and Translocation in Northern Red Oak and Red Maple as Affected by Herbicide Formulation and the Adjuvant Methylated Seed Oil
• The Influence of Tank Mix Additives While Making Low Volume Aerial Fungicide Applications
• Antifoaming and Defoaming in Agricultural Tank Mixes: Revisiting, Revising, and Reviving a Method
• Glyphosate Weed Control Enhancement with Ammonium Sulfate and Commercial Water Conditioning Agents
• Multiple Metal Cations as Spray Deposit Tracers and Evaluation of the AGDISP Ground Boom Spray Drift Model
• Effect of Processing Shear Time on EW Formulations
• Evaluation of a Proposed Drift Reduction Technology High-Speed Wind Tunnel Testing Protocol
• Evaluation of the EPA Drift Reduction Technology (DRT) Low-Speed Wind Tunnel Protocol
• Fungicides Associated with Two Adjuvant Formulations for Preventive and Curative Soybean Rust Control
• Design and Results of a Study to Measure Environmental Factors in Airliner Cabins and to Assess the Health and Comfort of Passengers and Crew Using Surveys
• Evaporation of Pesticide Droplets on Surfaces Under Various Relative Humidity Conditions
• Soil Water Measurements Relevant to Agronomic and Environmental Functions of Chemically Treated Soil
• Morpholine Amide Solvent: A New Inert
• Development of a Multimedia Model for the Fate Prediction of Hydrocarbon Fluids in Agrochemical Formulations
• Concentrations of Selected Chemical Species in the Airliner Cabin Environment
• Novel Delivery Systems for Integrated Pest Management
• Assessment of the Ozone Formation Potential from Pesticide Solvents Using a Mobile Ozone Chamber Assay Approach
• Investigating the Use of Hydrocarbon Fluids in Seed Treatment Formulations
• Kinetics and Reaction Products of Ozone and Surface-Bound Squalene
• Spray Adjuvant Effects on Droplet Size Spectra Measured by Three Laser-Based Systems in a High-Speed Wind Tunnel
• Comparison of ASTM and CIPAC Suspension Methods
• An Attempt to Characterize the Frequency, Health Impact, and Operational Costs of Oil in the Cabin and Flight Deck Supply Air on U.S. Commercial Aircraft
• Measurement of Physical Environmental Parameters and Apparent Ventilation Rates Aboard Passenger Aircraft
• Fainting Passengers: The Role of Cabin Environment
• A Unique Formulation of Glyphosate in the Acid Form
• Modular, Portable, Reconfigurable, and Wireless Sensing System for the Aircraft Cabin
• Formulation Performance Improvements with Blends of Alkyl Naphthalene Sulfonate Condensates Plus Lignosulfonates When Compared to Lignosulfonates Alone
• Collection Efficiencies of Various Airborne Spray Flux Samplers Used in Aerial Application Research
• Attapulgite as a Thixotropic Suspending Agent
• Fluorescence Imaging as a Non-Invasive Technology to Monitor the Performance of Glyphosate Adjuvants and Formulations
• The Effect of Polymeric, Ammonium Sulfate-Based Adjuvants on the Deposition of Glyphosate Spray Solutions
• Alkyl-Capped Block Copolymer Surfactants for Remediation of Soil Water Repellency and Heterogeneous Rootzone Moisture
• Controlled Release Pellet Formulation
• Managing Aldicarb Application with GPS/GIS Systems
• Use of a Soil Surfactant with Fungicides for Control of Fairy Ring Disease in Turfgrass
• New Polymeric Comb Dispersants for Agricultural Formulations: A Comparison of Performance in Pesticide Suspension Concentrates
• Development of an ASTM Method for Measurement of the Extensional Viscosity of Agricultural Spray Solutions
• Novel Adjuvants for Targeting Pesticide Delivery
• Microencapsulated Clomazone: Formulation Stability, Tank Mix Volatility, and Solvent Effects
• New Solvents for Agriculture—A Theoretical Modeling Approach
• Glyphosate Adjuvant Formulation with Glycerin
• Water Dispersible Granule Formulations Containing a New Defoaming Agent
• Development of Fast Dissolving Concentrated Gibberellin Water Soluble Granular Formulations
• A Method for the Preparation of NIST Traceable Fossil Fuel Standards with Concentrations Intermediate to SRM Values
• Cationic-based Crop Oil Concentrates
• Nozzle-Adjuvant Formulation Interactions: Implications on Herbicide Efficacy
• An Evaluation of Aerosol- and Liquid-Generated Silica Samples for Proficiency Analytical Testing
• Spray Retention Models for Arable Crops
• Water Conditioner Adjuvant and Fertilizer Formulation Effect on Micronutrient-Glyphosate Tank Mixtures
• Wind Tunnel Evaluation of Drift Reduction Potential and Spray Characteristics with Drift Retardants at High Operating Pressure
• Distribution and Ecology of Dreissena Polymorpha (Pallas) and Dreissena Bugensis (Andrusov) in the Upper Volga Basin
• Development of a Dry Applied Dispersible Granular Pesticide Carrier
• Use of Carbodiimides as Stabilizing Agents to Deliver Water—Labile Active Ingredients in Liquid Systems Including Aqueous Medium—Amitraz as a Case Study
• Crystalline Silica Analysis: A Comparison of Calibration Materials and Recent Coal Mine Dust Size Distributions
• Enhanced Recovery and Real-Time PCR Based Quantification of Mycobacteria from Metalworking Fluids
• Field-Collected and AGDISP-Predicted Spray Flux from an Aerial Application
• Suitable Adjuvant to Maximize Trifloxysulfuron Efficacy and Early Assessment of Herbicide Efficacy Using Chlorophyll Fluorescence
• Surfactant-Enhanced Release of Permethrin from a Cellulosic Granular Carrier
• Flight Line Variability in Rotary Atomizer Drop Size Distribution
• Opportunities for Standardization of Beryllium Sampling and Analysis
• Sampling and Analysis of Beryllium at JET: Policy Cost and Impact
• Opportunities for Development of Reference Materials for Beryllium
• Use of Electrically Enhanced Aerosol Plasma Spectroscopy for Real-Time Characterization of Beryllium Particles
• Improving the Infiltration of Water through Repellent Soils Using Synergistic Surfactant Blends Based on Alkyl Glucosides and Ethylene Oxide-Propylene Oxide Block Copolymers
• Determination of Beryllium Compounds by NIOSH 7303
• Characteristics of Beryllium Oxide and Beryllium Metal Powders for Use as Reference Materials
• Use of Herbicides to Control the Spread of Aquatic Invasive Plants
• ASTM Symposium on the Recovery and Enumeration of Mycobacteria from the Metalworking Fluid Environment
• Development and Testing of a Recommendation System to Schedule Copper Sprays for Citrus Disease Control
• Ethylenediamine Alkoxylates and Their Use as Adjuvants in Glyphosate Formulations
• Characterization of Sulfonated Lignin Dispersants by Hydrophobic Interactive Chromatography
• Nozzle Formulation Interactions: Consequences for Spray Droplet Adhesion to Plant Surfaces
• Interlaboratory Evaluation of a Portable Fluorescence Method for the Measurement of Trace Beryllium in the Workplace
• Development of a New Fluorescence Method for the Detection of Beryllium on Surfaces
• Standard Methods for Beryllium Sampling and Analysis: Availabilities and Needs
• Cut Performance Fundamentals and Norms Harmonization
• Effect of Microbial Contamination of Water-Based Metalworking Fluids on the Aerosolization of Particles and Microbial Fragments
• Influence of Adjuvants on Weed Control from Tribenuron
• Comparisons of Drift Reducing/Deposition Aid Tank Mixes for Fixed Wing Aerial Applications
• Dearomatized Fluids Used in Phenoxy Herbicides for Right-of-Way Sprays
• Development of Electronic Textiles to Transport Data and Power in Future U.S. Military Protective Clothing Systems
• Fluorescence Imaging for Investigating the Efficiency of Formulations, Adjuvants, and Application Systems
• Improved Formulations through Synergistic Combinations Based on Alkyl Glucosides
• Applications of Ether Amine Surfactants in Agricultural Formulations: The Known and Unexplored
• The Effect of Dispersant Solubility, Dispersant Dosage, Granule Diameter, and Dome Versus Radial Extrusion on Granule Spontaneity of Disintegration and Resistance to Attrition
• New Value-Added Polymeric Dispersants and Uses Thereof in Agricultural Formulations
• Agricultural Granule Particle Size Considerations
• Factors Influencing the Performance of Spray Delivery Systems: A Review of Recent Developments
• Increasing the Biological Activity of Weak Acid Herbicides by Increasing and Decreasing the pH of the Spray Mixture
• Influence of Clethodim Formulation and Oil Adjuvants on Weed Control and Overcoming Herbicide Antagonism
• Fatty Amine Alkoxylates as Effective Adjuvants for Strobilurin Fungicide Applications on Field and Orchard Crops
• Fluorescent Intensity of Dye Solutions under Different pH Conditions
• Evaluating Thermal Protective Performance Testing
• Progress in the Characterization of the Cutting Resistance of Protective Materials
• Development of SRMs 295x and 296x, Respirable Crystalline Silica on Filter
• The Performance of Different Analytical Approaches Measuring Respirable Quartz In the Workplace Analysis Scheme for Proficiency (WASP) and the Precision and Limit of Detection of the Direct On-Air-Filter Analysis Methods
• Improvements in the Measurement of Cut Protection Performance: Revisions to ASTM F 1790
• Revised Interlaboratory Study of Sweating Thermal Manikins Including Results from the Sweating Agile Thermal Manikin
• A Study on the Puncture Resistance of Rubber Materials Used in Protective Clothing
• Effect of Adjuvant on the Efficacy of Glyphosate Applied at Different Times of Day
• A Novel Water Conditioning Adjuvant for Use with Formulated and Nonformulated Glyphosate
• Evaluation of Some Adjuvants for Improving Glyphosate Efficacy
• Predicted Deposition Variability Due to Fluctuations in Release Height and Drop Size Distribution
• Improving the Effectiveness of Aerial Pesticide Sprays
• Comparison of Abscission Spray Application Practices for Mechanical Harvesting of Oranges
• Evaluation of Quartz Residue on Cassette Interiors of AIHA Proficiency Samples
• Infrared Analysis of Respirable Coal Mine Dust for Quartz: Thirty-Five Years
• Recovery and Quantification of Mycobacterium Immunogenum DNA from Metalworking Fluids Using Dual-Labeled Probes
• Benefits of a 2,4-D Acid Herbicide Formulation
• Evaluating the Physiological Performance of a Liquid Cooling Garment Used to Control Heat Stress in Hazmat Protective Ensembles
• Development of a Prototype Personal Cooling System for First Responders: User Feedback
• Comparison of Methods Used to Predict the Burn Injuries in Tests of Thermal Protective Fabrics
• Novel Approach to Soldier Flame Protection
• Silica Sampling and Analysis: Legal Issues Evolving from Regulatory Standards and the Role of ASTM E 1132
• Development of a Cooling Capability Test Method for Liquid-Cooled Textile System
• Effects of Thermal Properties on Skin Burn Predictions in Longer Duration Protective Clothing Tests
• Heat Transfer Characteristics of Sports Apparel
• An Explanation and Comparison of Sweating Hot Plate Standards
• Effects of Simulated Flash Fire and Variations in Skin Model on Manikin Fire Test
• Evaluation of Three Chemical Protective Clothing Materials for Selected Performance Properties
• Development of Non-Destructive Test Methods for Assessing Effects of Thermal Exposures on Fire Fighters' Turnout Gear
• Can Laboratory Pre-Treatment Of Welders' Protective Clothing Simulate Their Aging Process In Normal Use?