SEDL / Topics / Civil Engineering and Building Materials / All JAI

• Sustainable Use of Oil Sands for Geotechnical Construction and Road Building
• Moisture and Rutting Resistances of Foamed Asphalt Mixtures Containing Recycled Coal Ash or Shingles With Moist Aggregates
• Compressive Creep of Reinforced Polymeric Piling
• Influence of Recovery Processes on Properties of Binders and Aggregates Recovered from Recycled Asphalt Pavement
• Dynamic Behavior of Sand/Rubber Mixtures. Part I: Effect of Rubber Content and Duration of Confinement on Small-Strain Shear Modulus and Damping Ratio
• Dynamic Behavior of Sand/Rubber Mixtures, Part II: Effect of Rubber Content on G/G_O-γ-DT Curves and Volumetric Threshold Strain
• Laboratory and Field Evaluation of Cement-Treated Reclaimed Asphalt Pavement Blends as Roadway Base Material
• Engineering Properties of Cement–Treated Granular Soil for Geotechnical Application
• Sawdust Ash Stabilization of Reclaimed Asphalt Pavement
• Mechanical Characteristics of Degraded Silicone Bonded Point Supports
• A Test Method for Monitoring Modulus Changes during Durability Tests on Building Joint Sealants
• Moisture Sensitive Adhesives and Flooring Adhesive Failures
• Leaching Behavior of Fluorine from Soil Stabilized with Recycled Gypsum from Plaster Board
• An Evaluation of Reclaimed Asphalt Shingles for Beneficial Reuse in Roadway Construction
• Use of Ferrochromium Slag as an Artificial Aggregate in Pavement Layers
• Roofing Assembly Simulated Heat and Light Test
• Principles of Design and Installation of Below-Grade and Building Deck Waterproofing in 2010
• Rice Husk Ash Stabilization of Reclaimed Asphalt Pavement
• Recycled Asphalt Shingles Mixed with Granular Byproducts as Structural Fills
• Attempt at Quantification of Surface Degradation and Evaluation of Relationship between Outdoor and Accelerated Exposure of Construction Sealants
• Durability of Acrylic Sealants Applied to Joints of Autoclaved Lightweight Concrete Walls: Evaluation of Exposure Testing
• Characterization of Adhesive Joints for Hybrid Steel-Glass Beams by Means of Simplified Small Scale Tests
• In Situ Measurement of Compression Set in Building Sealants During Outdoor Aging
• Comparison of Specifications for Recycled Concrete Aggregate for Pavement Construction
• Dechlorination of Municipal Solid Waste Incineration Residues for Beneficial Reuse as a Resource for Cement
• Evaluation of the Effects of Climatic Conditions on Modulus of Base Materials with Recycled Asphalt Pavement
• Dual Barrier Protected Membrane Roof Assemblies
• Thermoplastic Polyolefin Roof Membranes Exposed in the Western United States for Seven Years
• Application of Rheological Models to Modified Roofing Asphalts
• Preliminary Evaluation of the Mechanical Properties and Durability of Transparent Structural Silicone Adhesive (TSSA) for Point Fixing in Glazing
• Moisture Susceptibility of Polymerized Stone Matrix Asphalt Mixtures using Warm Mix Asphalt Technologies using Moist Aggregates
• Resilient Characteristics of Bottom Ash and Bottom Ash-Soil Mixtures
• Single Ply Roofing: Introduction to a New Sustainability Standard for the Roofing Industry
• Electrical Conductance Methods for Locating Leaks in Roofing and Waterproof Membranes
• Case Studies of Foamed Adhesive Failures of Low Sloped Roofing Rigid Insulation Board
• Detector Tube Method for Ammonia Compared to Ion Selective Electrode for Selected Class C and Class F Fly Ash
• Groundwater Impacts from Leaching of Coal Combustion Products in Roadway Embankment Constructions
• Influence of Edge Restraint on Clip Fastener Loads of Standing Seam Metal Roof Panels
• Correlating Accelerated Laboratory, Field, and Thermal Aging TPO Membranes
• Service Life Assessment of a Low-Slope 55 % Al–Zn Alloy-Coated Steel Standing Seam Roof System
• Ways of Improving the Interfacial Durability of Silicone Adhesives in Building Applications
• Using Ground Granulated Blast Furnace Slag with Seawater as Soil Additives in Lime-Clay Stabilization
• Performance Related Tests on Recycled Materials for Sustainable Design of Pavement Systems
• Characteristics of a Coal Fly Ash Subjected to Additional Processing
• Full Depth Reclamation of Asphalt Pavements Using Coal Combustion Byproducts
• Common Sense and Masonry Repair
• Test Method for Determining the Efflorescence Potential of Masonry Materials Based on Soluble Salt Content
• Efflorescence: Evaluation of Published Test Methods for Brick and Efforts to Develop a Masonry Assembly Test Method
• Design and Use of Expansion Joints in New and Existing Clay Masonry Wall Systems
• Comparative Study of Freeze and Thaw Test Procedures on Molded Brick
• Evaluation of the Critical Air-Void System Parameters for Freeze-Thaw Resistant Ternary Concrete Using the Manual Point-Count and the Flatbed Scanner Methods
• Improving the Thermal Resistance of Brick Masonry Systems
• Detailing Masonry Veneer/Steel Stud Backup Systems at Fenestration Systems to Avoid Moisture Problems
• Statistical Analysis of Flexural Tensile Strength of Clay Masonry as a Function of Void Area
• A Laboratory Evaluation of Plastic (Stucco) Cement-Based Plaster as a Barrier to Water Penetration of Concrete Masonry Construction at Hurricane Force Wind Speeds
• Evaluation and Repair of Thin Brick Veneer Facades
• Seismic Performance Tests of Masonry and Masonry Veneer
• Comparison of Workability Test Methods for Self-Consolidating Concrete
• Proposed Masonry Specified Compressive Strength Requirements
• Assessing Molding Procedure of Compressive Strength Test Specimens for Self-Consolidating Concrete
• Predicting Dynamic Segregation of Self-Consolidating Concrete from the Slump-Flow Test
• Determination of Rheology of Self-Consolidating Concrete Using the 4C-Rheometer and How to Make Use of the Results
• Drying Response of Wood-Frame Construction: Laboratory and Modeling
• Experimental Assessment of Hygrothermal Properties of Wood-Frame Wall Assemblies—Moisture Content Calibration Curve for OSB Using Moisture Pins
• Selective Review of Weathering Tests for Sealants and Thoughts on the Development of Novel Test Concept Based on Simultaneous Weathering and Movement
• Use of Fiber Optic and Electrical Resistance Sensors for Monitoring Moisture Movement in Building Stones Subjected to Simulated Climatic Conditions
• New Weathering Test Method for Sealants and Preliminary Experimental Results
• The Effect of Air Cavity Convection on the Wetting and Drying Behavior of Wood-Frame Walls Using a Multi-Physics Approach
• A Robust Installation for Brick-Mold Windows and Doors Using Self-Adhered Flashing
• Assessing the Effectiveness of Wall-Window Interface Details to Manage Rainwater—Selected Results from Window Installation to a Wall Sheathed in Extruded Polystyrene
• Towards Development of a Performance Standard for Assessing the Effectiveness of Wall-Window Interface Details to Manage Rainwater Intrusion
• Vapor Permeability Measurements: Impact of Cup Sealing, Edge Correction, Flow Direction, and Mean Relative Humidity
• Experimental Evaluation of Ultraviolet and Visible Light Curing Acrylates for Use in Glass Structures
• Resistance of Adhesive Bonding of Ultra-High Performance Concrete to Hygrothermal, Corrosive, and Freeze-Thaw Cycling Environments
• Measurement of Water Permeability of Roof Tiles and Influence of Entrapped Air
• Assessment of Energy Rating of Polyurethane Spray Foam Walls: Procedure and Interim Results
• Setting Realistic Design Indoor Conditions for Residential Buildings by Vapor Pressure Difference
• Proposed Modifications for Models of Heat Transfer Problems Involving Partially Melted Phase Change Processes
• A New Testing Method to Evaluate the Relative Drying Performance of Different Building Envelope Systems Using Water Trays in Stud Cavities as Moisture Source
• Laboratory Tests of Water Penetration through Wall-Window Interfaces Based on U.S. Residential Window Installation Practice
• Concrete Hygrothermal Properties and the Influence of their Variability on Moisture Movement in Concrete Walls
• Field Performance and Accelerated Weathering of High Performance Acrylic and Polyurethane Sealants for Tilt-Up Applications
• Role of Vapor Barrier in Wood-Frame Stucco Wall in Various North American Climates: Observations from Hygrothermal Simulation
• Polychlorinated Biphenyl Transport from Consolidation of Contaminated Sediments During In Situ Capping
• Speciation and Mobility Assessment of Heavy Metals in the Coastal Municipal Solid Waste Incinerator Ash Landfill
• What We Do Not Know: Perspectives on Wall-Window Combinations and Performance Assurance We Have yet to Address
• Cleaning Silicone Residue from Glass
• Evaluation of the Durability Potential of Silyl Terminated Polyacrylate Based Construction Sealant
• Remediation of Harbor Sediments Contaminated by Polycyclic Aromatic Hydrocarbon and Metals
• Sediment Trend Analysis in Support of Unexploded Explosive Ordnance Risk Assessment
• Development and Application of an Analytical Method for the Determination of Partition Coefficients of Tributyltin in the Forth and Clyde Canal, Glasgow, Scotland
• Dioxin Assessment in a River Flood Plain: Soil and Sediment Contamination
• Changes in Fluid Penetrability and Mechanical Properties of Concrete due to High Temperature Exposure
• Water Penetration of Cladding Components—Results from Laboratory Tests on Simulated Sealed Vertical and Horizontal Joints of Wall Cladding
• Isolation of Tributyltin-Degrading Bacteria Citrobacter braakii and Enterobacter cloacae from Butyltin-Polluted Sediment
• Evaluating Management Options for the Disposal of Dredged Sediments
• Verification of Site Cleanup Using a Dual-Equilibrium Desorption Model
• An Innovative Solution for Managing Waterworks Sludge: Developing an Alum Sludge-Based Multistage Constructed Wetland System for Wastewater Treatment
• Chemical Speciation and Heavy Metal Mobility in Contaminated Marine Sediments
• Contaminated Sediment Management by Capping and Deep Water Confined Aquatic Disposal in the Harbor of Oslo
• A New Approach to Sustainable Canal Sediment Management in Scotland
• Extreme Exposure Fenestration Installations—The Florida Challenge
• Measuring the Impact of Experimental Parameters upon the Estimated Thermal Conductivity of Closed-Cell Foam Insulation Subjected to an Accelerated Aging Protocol: Two-Year Results
• Distribution and Correlation of Tributyltin and Organic Matter in the Sediments of Hakata Bay, Japan
• Enhanced Electrokinetic Remediation of Mercury-Contaminated Tailing Dam Sediments
• Long-Term Outdoor Weathering Study of Construction Sealants
• An Attempt at Finding a Correlation Between Environmental and Accelerated RILEM TC 139-DBS Weathering for One-Component Polyurethane Sealants Applied on Mortar
• Uncertainty Analysis in Hygrothermal Measurements and Its Effect on Experimental Conclusions
• Effect of Embedded Seams on Tested Water Vapor Transport Properties of Low Permeance Materials
• Sensitivity of Hygrothermal Analysis to Uncertainty in Rain Data
• Tests of a Novel Ceiling Panel for Maintaining Space Relative Humidity by Moisture Transfer from an Aqueous Salt Solution
• Modified Inverted Cup Test Method for Evaluating Moisture Penetration through Construction Materials
• Convective Mass Transfer Coefficients for Gypsum and Wood Paneling
• Compact Asphalt Shingle Roof Systems: Should They be Vented?
• Long-Term Properties of Airfoam-Treated Lightweight Soil Made from Dredged Clay
• Effects of Amendment Materials on Cement-Solidified Contaminated Marine Sediments—Mechanical Stability and Leaching of Heavy Metals
• Determination of Spatial and Seasonal Distribution of Surface Sediment Contamination in an Irish River and Estuarine System
• Treatment of Salted Road Runoffs Using Typha latifolia, Spergularia canadensis, and Atriplex patula: A Comparison of Their Salt Removal Potential
• Ecotoxicological Assessment of an In-Lake Remediation Method
• Adhesion Development of Organic and Silicone Sealants on Wet and Dry Concrete
• Joint Sealing Systems for Pavements—A New Approach Towards a Performance Related Evaluation of Capability and Durability
• Using Rheology Test Methods to Assess Durability of Cured Elastomers Undergoing Cyclic Deformation
• Development of Accelerated Aging Test Methodology and Specimen for Bonded CFRP Systems
• Substrate Durability Guidelines Used in Silicone Structural Attachment
• An Investigation of Climate Loads on Building Façades for Selected Locations in the United States
• The Role of XRF, Inter-Element Corrections, and Sample Preparation Effects in the 100-Year Evolution of ASTM Standard Test Method C114
• Relative Resistance of Silicone and Si-Hybrid Based Sealants to Alternating Periods of Accelerated Weathering and Thermo-Mechanical Movements
• Quantification of Effect of Enforced Cyclic Movement and Regional Exposure Factors on Weatherability of Construction Sealants
• Evaluation of Silicone Sealants at High Movement Rates Relevant to Bomb Mitigating Window and Curtainwall Design
• Effect of Strain on the Modulus of Sealants Exposed to the Outdoors
• Durability by Design: New Results on Load-Carrying Silicone Bonding
• Delayed Ettringite Formation (DEF) Within Pre-Cast Concrete Cladding Panels on a Mid-Rise Commercial Office Building: A Case Study
• Envelope Remediation—A Case Study in Support of an Over-Cladding Approach
• Condensation Damage Behind Self-Adhering Membrane Flashing and Interior Furnishings on Exterior Residential Walls
• Evaluation of Debonding of Lamina from Foam and Repairs to Exterior Insulation and Finish System Façade
• How to Detect and Observe Hidden Window Leaks Using Infrared Thermography
• XRF, XRD, and Thermal Analysis Techniques for Quantitative Determination of Portland Cement and Slag Cement Constituents
• Repair of an Earthquake Damaged Building Façade in Coordination with FEMA: A Case Study Including Stabilization, Evaluation, Historically Sensitive Restoration, and Hazard Mitigation
• Effects of Water Immersion on Building and Civil Engineering Joints and the Use of the Arrhenius Method in Predicting Adhesion Lifetime of Water-Immersed Joints
• A Form to Follow Function: Recladding A Regional Healthcare Facility
• Design Responsibility for Weathertight Perimeter Detailing for Non-Flanged Windows: Current Practices, Common Problems, and Possible Solutions
• Determination of the Water Diffusivity of Concrete Using Drying/Absorption Test Results
• Evaluating Drainage Characteristics of Water Resistive Barriers as Part of an Overall Durable Wall Approach for the Building Enclosure
• BRE Environmental Profiles: Past, Present, and Future
• Effects of Temperature, Chemical, and Mineral Admixtures on the Electrical Conductivity of Concrete
• Erroneous Design Assumptions and Construction Defects in a Thin Stone Facade System
• Design of Engineered Drainable Exterior Insulation and Finish System (EIFS) Cladding
• Applying C1601-06 “Standard Test Method for Field Determination of Water Penetration of Masonry Wall Surfaces” in Practice
• Sill Pan Flashing for Block-Frame Windows in Recessed Concrete Openings—Case Studies
• Development of a Canadian National Standard on Design for Disassembly and Adaptability for Buildings
• The Review on Sustainability of National Building Standard Design in China
• Designing a System to Apply an Assessment Method of Buildings for All Lifecycle Stages Based on the Concept of Eco-Efficiency
• Standards Versus Recommended Practice: Separating Process and Prescriptive Measures from Building Performance
• Rethinking Green Building Standards for Comprehensive Continuous Improvement
• Evaluating Sustainability Using Standard Approaches: The BEES Tool
• Continuous Improvement of the U.S. Green Building Council’s Leadership in Energy and Environmental Design (LEED®) Rating System™
• Snap, Crackle, Pop: Remediation of a Noisy Curtain Wall
• Over-Cladding of Aluminum Framed Curtainwalls and Skylights
• Retrofitting Barrier Exterior Insulation and Finish System: Methodology and Performance Assessment
• The Identification of Corrosion-Related Damage from Cramp Anchors in a Limestone-Clad Building Façade Using NDE Techniques
• Remediating Basement Leaks
• Pilot Study on Wind Uplift Resistance of Adhesive Applied Low Slope Roofing Systems
• Retrofitting a Green Roof on an Existing Facility: A Case History
• Understanding Low-Sloped Roofs Under Hurricane Charley From Field to Practice
• FloorScore—Flooring Products Certification Program for Indoor Air Quality
• Critical Evaluation of Existing Specifications for Polyisocyanurate (ISO) Foam Insulation Boards in Roofing Applications
• Qualitative Sampling of the Building Envelope for Water Leakage
• Energy Savings Resulting from Building Envelope Upgrades in Mid-Rise Construction—A Case Study
• Techniques for Predicting Cladding Design Wind Pressures
• Façade Renovation of the Wexner Center for the Arts
• Evaluation of the Rheological Properties and Master Curve Development for Bituminous Binders Used in Roofing
• Quality Assurance Program for Soldering Copper Roofs
• Inputs and Analyses: An End User’s Perspective of Heat-Air-Moisture Data
• Effects of Drying Conditions, Phase Transformations, and Carbonation Reactions on Measurements of Sorption Isotherms of Building Materials
• Water Vapor Transmission Measurement and Significance of Corrections
• Evaluation of the Effectiveness of Clear Water Repellent Coatings on Partially Grouted Single-Wythe Concrete Masonry Walls
• Roman Cement Mortars in Europe’s Architectural Heritage of the 19th Century
• Perspectives: The Reintroduction of Natural Cement
• Case History of the Use of Electronic Survey Techniques to Assess Planar Distortions in Building Facades
• Artificial Roofing Slates and Shingles
• Welding of Thermoplastic Roofing Membranes Subjected to Different Conditioning Procedures
• Investigation of the Effect of Heat on Specially Formulated Thermoplastic Polyolefin (TPO) Films by Thermogravimetry, Dynamic Mechanical Analysis, and Fourier Transform Infrared Spectroscopy
• Specifications for Roofing and Industrial Asphalts Using Dynamic Shear Rheometry (DSR)
• Variations in the Activity of Dry-Powder Water-Repellent Mortar Admixtures with Different Mortar Formulae
• Full-scale Flexural Strength Testing for Stone Cladding Design
• Comparison of Field Testing with Laboratory Testing of the Durability of Stone
• Testing of Composite Stone Faced Aluminum Honeycomb Panels
• Status on Development of Code Requirements for Exterior Stone Cladding
• Travertine: Successful and Unsuccessful Performance, Preconceived Notions, and Mischaracterizations
• Practice, Education and Research for Sustainable Infrastructure (PERSI)
• Introducing Standards and Sustainable Design
• Development of American National Standards for Sustainable Building Products
• Sustainability in Building Construction—International Standards in Progress
• An Overview of the History and Economic Geology of the Natural Cement Industry at Rosendale, Ulster County, New York
• Masonry Repairs at Cheshire Mill No. 1, Harrisville, New Hampshire
• Paving Design: Is Rigid-Fix External Stone Paving the Way to Go?
• Characteristics That Affect the Integrity of Existing Thin Stone Cladding
• Stiffness Considerations in Dimension Stone Anchorage Design
• Material Strength Considerations in Dimension Stone Anchorage Design
• Moisture Buffer Value of Building Materials
• The Effect of Air Flow on Measured Heat Transport through Wall Cavity Insulation
• Testing and Assessment of Marble and Limestone (TEAM)—Important Results from a Large European Research Project on Cladding Panels
• Phase Analysis of Hydraulic Cements by X-Ray Powder Diffraction: Precision, Bias, and Qualification
• Determination of Failure Criteria for Electric Cables Exposed to Fire for Use in a Nuclear Power Plant Risk Analysis
• Durability of Marble Cladding—A Comprehensive Literature Review
• The Natural Cement Revival
• A Discussion of the Benefits and Problems of ASTM C 1324 for Analyzing Hardened Masonry Mortars
• Modeling the Heat, Air, and Moisture Response of Building Envelopes: What Material Properties are Needed, How Trustful Are the Predictions?
• Evaluation of Functional Approaches to Describe the Moisture Diffusivity of Building Materials
• Hydration Processes in Pastes of Roman and American Natural Cements
• Fundamental Frequency Testing of Segmental Retaining Wall (SRW) Specimens: Test Considerations
• Study of Weatherability of Construction Sealants with Novel Testing Method
• Proposed Design and Method for Providing Sealed Joint Performance under Relative Story Displacement
• Investigation and Repair of Glazed Brick Cladding: A Case Study
• Interlaboratory Comparison of the Thickness of the Destroyed Surface Layer of Closed-Cell Foam Insulation Specimens
• The Effect of Vertical Distribution of Water Permeability on the Modeled Neutralization Process in Concrete Walls
• Improved Suction Technique for the Characterization of Construction Materials
• Development of a Practical Method to Evaluate the Fatigue Properties of Structural Silicone Glazing Adhesives
• Formulating High Weatherability Sealants: Possibilities and Challenges
• Criterion Test for Method Selection in Determining the Bulk Specific Gravity of Hot-Mix Asphalt
• The Line Method for Petrographic Determination of the Quantity of Fly Ash and Ground-granulated Blast Furnace Slag in Hardened Concrete and Blended Cement
• Formulating with Rosendale Natural Cement
• Calcination of Marls to Produce Roman Cement
• Petrography: Distinguishing Natural Cement from Other Binders in Historical Masonry Construction Using Forensic Microscopy Techniques
• Natural Cement in the 21^st Century
• Laboratory Study of Time-of-Tooling Effects on Mortar Joint Color
• Used Oil Derived Fuel Utilization for the Production of Portland Cement
• From Development to Implementation of Sustainable Concrete in a Precast Plant — A Case Study
• Development of Pavement Smoothness Index Relationship
• Quantification of Differential Thermal Movement in Insulating Glass Edge Seals Using Finite Element Analysis
• Nondestructive Field Testing of Installed Weatherproofing Sealant Joints—Questions and Answers
• Superpave and the Aggregate Industry
• Replacement of the Final Time of Setting Maximum with an Initial Time of Setting Maximum as measured with the Gillmore Needles in ASTM C 91, C 1328, and C 1329
• Perchlorate Accumulation and Potential Exposure from Durum Wheat Irrigated with Colorado River Water
• Assessing Human Exposure to Perchlorate Using Biomonitoring
• Chromite Ore Processing Residue (COPR): Hazardous Contaminated Soil or Solid Waste?
• Effect of Acid Treatment Agent of Sea Laver on Geoenvironmental Properties of Tidal Flat Muds in the Ariake Sea
• Disposal of Dredged Material in a Local Confined Disposal Facility: Budgeting and Accounting of Contaminant Transport
• Contamination of Sediments and Proposed Containment Technique in a Wood Pool in Shimizu, Japan
• Material Behavior of Dredged Contaminated Sediments from Simple Laboratory and Oedometer Tests
• Efficiency of Arsenic Removal Unit Working in Bangladesh and Cement Stabilization of Its Sludge
• Consolidation Yield Stress of Osaka-Bay Pleistocene Clay with Reference to Calcium Carbonate Contents
• Biochemical Effects on the Long-Term Mobility of Heavy Metals in Marine Clay at Coastal Landfill Sites
• Current Status of Estrogenlike Compounds in Sediments in Enclosed Sea Areas
• The Temporal and Spatial Dynamics of Trace Metals in Sediments of a Highly Urbanized Watershed
• Evaluation of the Removal of Heavy Metals from Contaminated Sediment in Continuous Flow Tests with Selective Sequential Extraction
• Overview of Natural Attenuation of Sediments
• Seawater Quality, Suspended Solids, and Settling Particles in the Wood Pool Area of Shimizu Port, Japan
• Effect of Specimen Size on Consolidation Parameters of Marine Clay Deposits
• Microstructure, Strength, and Consolidation Properties of Ariake Clay Deposits Obtained from Samplers
• Transport Phenomena of Volatile Solute in Soil during Bioventing Technology
• Applicability of Cement-Stabilized Mud Soil as Embankment Material
• Environmental Monitoring of the Sediment Pollution along the Thai:Laos Mekong
• Seismic Evaluation of Low-Rise Reinforced Masonry Buildings with Flexible Diaphragms
• The Lasting Effect of Sand Capping Techniques on Nutrient Release Reduction from Contaminated Sediments in Tokyo Bay
• Use of Optical Imaging/Image Analysis System for the Quantitative Analysis of Surface Changes Induced by Outdoor Weathering on Sealants
• Electrokinetic Dewatering and Sedimentation of Dredged Contaminated Sediment
• Remediation Technology for Boron and Fluoride Contaminated Sediments Using Green Plants
• Electrokinetically Enhanced Settlement and Remediation of Contaminated Sediment
• An Investigation of the Heaving Mechanism Related to Chromite Ore Processing Residue
• Investigation of Barium Treatment of Chromite Ore Processing Residue (COPR) 031
• Optical Tests on the Slow Release of Biogenic Gas Bubbles in Sediment
• Development of Filtration System for Removal of Contaminated Suspended Solids in an Enclosed Sea Area
• A Combined Method: Precipitation and Capping, to Attenuate Eutrophication in Canadian Lakes
• Development of an In Situ Biodegradation Technology by Using Anaerobic Micro-Organisms for Sediment Contaminated with Dioxins
• Permeability Characteristics of Lake Kojima Sediment and Their Improvement
• Monitoring Heavy Metal Transport in Aquifer Based on Electrical Property Measurements
• Development of an Acoustical Method for Measuring the Transition Layer of Surficial Marine Sediments
• Modeling TPH Desorption in Unconsolidated Dune Sand during Remediation Using Dual-Equilibrium Desorption (DED) Model
• Cadmium Transport in Volcanic Ash Soil During Citric Acid Solution Flow
• Effect of Dispersivity of Filling Material on Performance of Contaminant Barrier
• Effects of Salt on the Sorption of Lead by Marine Clay in Column Tests
• Reactive Material Options for In Situ Capping
• Electrokinetic Remediation of Contaminated Dredged Sediment
• Groundwater Flow and Arsenic Contamination Analyses in Southern Bangladesh
• A Comprehensive Examination of the Internal Angle of Gyration for the Superpave Gyratory Compactor
• Tweaking the System: Modifications to the Superpave Mix Design System
• Simulative Performance Test for Hot Mix Asphalt Using Asphalt Pavement Analyzer
• The Importance of Integrating Flashing and the Water Resistive Barrier in the Exterior Wall Systems of Residential Buildings
• Analysis of Error in Pavement Ground Truth Indicators for Evaluating the Accuracy of Automated Image Collection and Analysis System
• Dynamic Modulus Testing of Thin Pavement Cores
• Review of Specific Local Fenestration Units, Building Envelope Interface Practices, and Materials Compared to ASTM E 2112, Current Acceptance Criteria, and Evaluation Practices
• Analysis of Surface Inertial Profiles Measured on Jointed Portland Cement Pavements
• Relationship Between Paste Volume and Cementitious Materials Content in Hardened Concrete
• Reducing Modulus of Sealants to Improve Durability
• A Logical Pozzolanic Index and Its Use in Concrete Proportioning
• Mechanical Properties of ASR-Affected Concrete Containing Fine or Coarse Reactive Aggregates
• Using Dynamic Rheology to Measure Cement-Admixture Interactions
• Water Resistance and Durability of Weather-Resistive Barriers
• Enhancing the Reliability of Evaluating Chloride Ingress in Concrete Using the ASTM C 1202 Rapid Chloride Penetrability Test
• The Effect of Aggregate Gradation on Engineering Properties of High Performance Concrete
• Assessing the Precision of Falling Weight Deflectometer for Field Measurements
• Smoke Toxicity Data for Fire Hazard and Risk Assessment of Cable Products
• Relationship Between Indentation Hardness and Water to Cement Ratio of Hardened Mortar and Concrete
• Standards Development for Impermeable, Constructible, and Durable Waterproofing
• Methodology for Determination of Hygroscopic Moisture Content of Soils
• Performance Testing of Flashing Installation Methods for Brick Mold and Nonflanged Windows
• Laboratory Investigation of HMA Performance Using Hamburg Wheel Tracking and DSR Torsional Creep Tests
• Characterization of Asphalt Concrete by Multi-Stage True Triaxial Testing
• Effect of Installation Details on the Condensation Performance of Window Frames
• Adhesive Characterization & Durability of Self-Adhered Flashings
• Water Resistance and Vapor Permeance of Weather Resistive Barriers
• A Review of Climate Loads Relevant to Assessing the Watertightness Performance of Walls, Windows, and Wall-Window Interfaces
• Fire Testing of Electrical and Optical Fiber Cables for Transportation Vehicles, Especially in North America
• Modified Heat of Combustion Measurement for Electrical Communications and Optical Cables
• Measuring Pavement Friction Characteristics at Variable Speeds for Added Safety
• An Automatic Pavement Surface Distress Inspection System
• Reducing Tin and Aminosilane Concentration in Silicone Elastomeric Coating to Improve Its Durability
• Designing and Specifying Self-Adhering Flashings for the Window-Wall Interface
• Mechanistic Quality Management of Hot Mix Asphalt Layers with Seismic Methods
• High Throughput Flammability Characterization Using Gradient Heat Flux Fields
• Effect of Continuous Agitation on Concrete Rheology
• Harmonization of Macrotexture Measuring Devices
• Obtaining Creep Compliance Parameters Accurately from Static or Cyclic Creep Tests
• Which Way Do Concrete Cracks Run?
• Decing Salt-Scaling Resistance: Laboratory and Field Evaluation of Concrete Containing up to 70 % Class C and Class F Fly Ash
• Statistical Significance of the Restrained Slab Test for Quantifying Plastic Cracking in Fiber Reinforced Concrete
• Experimental Determination of Relative Permeability of Sand
• Properties of Metakaolin High-Strength Cementitious Grouts
• Durability Performance of Bridge Concretes, Part I: High Performance Concrete (HPC)
• Determination of Crushing Strength of Cenospheres
• Durability Performance of Bridge Concretes, Part II: High-Strength Concrete (HSC)
• Cement-Admixture Interactions Related to Aluminate Control
• Performance of a New Co-Polymer Sulfonate-Based Mid-Range Water-Reducing Admixture
• Impact of Sulfate Contamination on Swelling Behavior of Lime-Stabilized Clays
• An Overview of Fundamental and Simulative Performance Tests for Hot Mix Asphalt
• Estimation of Compressive Strength of Recycled Concretes with the Ultrasonic Method
• Effects of Proposed Well-Graded Aggregate Gradations on Frost Durability of Concrete
• Investigation into Flow Property Measurements of Low-Slump Concrete Using Vibrating Slope Apparatus (VSA)
• Generalized Archie's Law for Estimation of Soil Electrical Conductivity
• Use of HMA Stiffness Results as a Referee Test in Indiana
• Utilization of an Asphalt Pavement Analyzer for Hot Mix Asphalt Laboratory Mix Design
• C-φ Characterization Model for Design of Asphalt Mixtures and Asphalt Pavements
• Fracture Resistance Characterization of Superpave Mixtures Using the Semi-Circular Bending Test
• Field Validation of Superpave Shear Test on NCAT Test Track
• Identification of a Physical Model to Evaluate Rutting Performance of Asphalt Mixtures
• Simple Extraction of Sulfite and Sulfate in Cogeneration Plant Circulating Fluidized Bed Fly Ash for Ion Chromatographic Analysis
• Effects of Vacuum Processing on Strength and Surface Hardness Properties of Concrete
• Spatial Variations in Material Properties of Segmental Retaining Wall (SRW) Units, Part I: Observed Variations
• Effects of C₃A and Mineral Admixtures on the Sulfate Attack Using ASTM C 1012
• Hydration Behavior of Portland Cements with Different Hemihydrate/Gypsum Ratios in the Presence of Common Chemical Admixtures
• Spatial Variations in Material Properties of Segmental Retaining Wall (SRW) Units, Part II: Sampling Considerations for Absorption Tests
• Flexible Crumb Tire Rubber-Filled Cement Mortars as a Protective System for Buried Infrastructure
• The Role of Friction in Post-Crack Energy Absorption of Fiber Reinforced Concrete in the Round Panel Test
• Density Compensation of TDR Calibration for Geotechnical Applications
• ASTM C 88 Test on Soundness of Aggregate Using Sodium Sulfate or Magnesium Sulfate: A Study of the Mechanisms of Damage
• Estimating Unsaturated Hydraulic Conductivity of Fine-Grained Soils Using Electrical Resistivity Measurements
• A New Test Method for Porosity Measurements of Portland Cement Pervious Concrete
• Historical Development and Future Prospects of Structural Silicone Sealants in China
• Developing a Performance-Based Joint Sealant Specification for Airport PCC Pavements
• Material Properties for Use in FEA Modeling: Sealant Behavior with Ambient Laboratory Climate Aging
• Effect of Float Glass Surface Composition on Silicone Sealant Adhesion Tested After Simultaneous Exposure to Hot Water and Ultraviolet Light
• Artificial Weathering and Cyclic Movement Test Results Based on the RILEM TC139-DBS Durability Test Method for Construction Sealants
• Issues Related to the Mechanical Property Characterization of Sealants
• Estimation of the Fatigue Resistance of Sealants to Movement at Intersections of Sealed Joints and Improvements in the Joint Design Method
• Flowable Fill Using Flue Gas Desulfurization Material
• Beneficial Reuse of Foundry Sands in Controlled Low Strength Material
• Properties of Controlled Low-Strength Materials Made with Wood Fly Ash
• Rapid Set, High-Early Strength, Non-Excavatable Flowable Fill
• Methods for Field and Laboratory Measurement of Flowability and Setting Time of Controlled Low-Strength Materials
• Long Term Study of 23 Excavatable Tennessee Flowable Fill Mixtures
• Thermally Insulating Foundations and Ground Slabs Using Highly-Foamed Concrete
• Field Demonstration Test on Construction and Strength of Flexible Pipe Drainage System Using Flowable Fill
• Freeze-Thaw Effects and Gas Permeability of Utility Line Backfill
• Seeing and Photographing Your Visual Observations
• Glass Facade Assessment
• Concepts for Development of a Service Life Prediction Methodology for Sealed Building and Construction Joints—Review and Roadmap for Future Research
• Evolution of the Development of the Chicago Facade Inspection Ordinance
• Facade Inspections a Must for Both New and Old Buildings—A Case Study of Two High Rise Structures
• Durability by Design: Load Carrying Silicone Bonding, Herz Jesu Church, Munich
• Harmonization and Optimization of Weathering Test Methods for Building and Construction Sealants and Adhesives
• Silyl-Terminated Polyurethanes for Construction Sealants
• A Simple Compatibility Testing Protocol for Bentonite-Based Barrier Systems
• Investigation of the Behavior of Geosynthetic Clay Liners Subjected to Thermal Gradients in Basal Liner Applications
• Effect of Freeze-Thaw on the Permeation of Arctic Diesel Through a GCL