SEDL / Topics / Plastics / All JAI
Long-Term Hydrostatic Strength and Design of Thermoplastic Piping Compounds
ASTM D 3350: A Historical and Current Perspective on a Standard Specification for Identification of Polyethylene Plastics Pipe and Fittings Materials
NSF 14: Shaping the Future of the Plastic Piping Industry
How to Crawl Through a Pipe—Terminology
Design and Performance of Plastic Drainage Pipes in Environmental Containment Facilities
Technical Considerations When Fabricating PVC Pressure Fittings
Polyamide 12 Natural Gas Distribution Systems Operating at Pressures Greater Than 125 Psig
Deflection Lag, Load Lag, and Time Lag of Buried Flexible Pipe
North America’s Cinderella Pipe Story: A Look at PVC Pipes’ Climb to the Top
Tensile Testing of a Push-On Restrained Joint PVC Pipe
Environmental Stress Cracking of Commercial CPVC Pipes
A Brief History of the Development and Growth of the Corrugated Polyethylene Pipe Industry in North America
A Service Life Assessment of Corrugated HDPE Drainage Pipe
The Hydrostatic Stress Board of Plastics Pipe Institute: The First 50 Years
Influencing Factors of Heat Transfer Coefficient in Air and Gas Quenching
Unique Calibration Case Study for Predictive Model of Installation Loads for Directional Drilled Fusible PVC Pipe
Building Knowledge from Failure Analysis of Plastic Pipe and Other Hydraulic Structures
Axial Response of HDPE Pipes as a Result of Installation by Directional Drilling
Yesterday, Today, and Now: Polyamide-11 Gas Piping at 200 psig Under the New Rules
Challenges in Investigating Chlorinated Polyvinyl Chloride Pipe Failures
Trenchless Case History—University of Denver’s Use of High-Performance Restrained-Joint Water Distribution Pipe
Plastic Tubing Prospect to Replace Cast Iron Conduit in Steam Heating Systems
Stress Crack Protocol for Finished Product Testing of Corrugated High Density Polyethylene Pipe
Guided Side-Bend: An Alternative Qualification Method for Butt Fusion Joining of Polyethylene Pipe and Fittings
Designing Stormwater Chambers to Meet AASHTO Specifications
Design Development of Large Thermoplastic Chambers for Stormwater Retention
Specifying Plastic Pipes for Trenchless Applications
New Ceramifying Polymer Materials for Passive Fire Protection Applications
Dynamic Modelling and Simulation of Squirrel-Cage Asynchronous Machine with Non-Linear Effects
Determining Nitriding Parameters with Neural Networks
Variations in the Mechanical Strength of a Composite Material of Thermoplastic Matrix Reinforced with Woven Glass-Fabric After Being Submitted to Diverse Damage Sequences: A Statistical Analysis