Iron and Steel Products

    Optimum CNT Concentration and Bath Temperature for Maximum Heat Transfer Rate during Quenching in CNT Nanofluids

    Reactor Pulse-Repeatability Studies at the Annular Core Research Reactor

    Development of INSPCT-S for Inspection of Spent Fuel Pool

    Outline of Testing and Evaluation Program Used in Selection of Adhesives for Transparent Adhesive Joints in All-Glass Load-Bearing Structures

    New Work on Updating and Extending the Nuclear Data Standards

    Development of a Non-Destructive Evaluation Practice of Installed Weatherproofing Sealant Joints Using a Rolling Device—An Introduction to ASTM C 1736

    Naphthalene Sorption to Organic Additives in Cement-Treated Soils

    Comparison of the Laser and Electron Beam Welding of Steel Sheets Treated by Nitro-Oxidation

    Mechanical and Microstrutural Characterization of Weldments of Ferritic Stainless Steel AISI 444 Using Austenitic Stainless Steels Filler Metals

    Clinical Results of a Total Knee Prosthesis with Floating Platform at 5.5 Years

    Roller Profile Development for an Axially Loaded, Single Row Spherical Roller Bearing in an Oscillating Application

    Intensive Quenching of Steel Parts and Tools in Water Salt Solutions of Optimal Concentration

    Effect of Accuracy of Temperature Measurements on Determination of Heat Transfer Coefficient during Quenching in Liquid Media

    Experimental Investigation of Microstructural and Mechanical Properties of New Steels for Large Blooms

    Mechanical Properties of ASTM A283 Carbon Steel Subjected to the Sulphidation Process

    Modeling and Simulation of Film and Transitional Boiling Processes on a Metallic Cylinder During Quenching

    New Cast Iron Alloys with High Wear Resistance at Elevated Temperatures

    Impact Properties of Vacuum Heat Treated AISI D2 and 8 % Cr Cold Work Tool Steels

    Effects of Austenitizing Temperatures on Primary Structure Transformation in Cast High-Speed Steel of M2 Type Inoculated with Powder Additions of W and TiB2

    Modeling of Hardness of Low Alloy Steels by Means of Neural Networks

    CFD-Simulation of Film Boiling at Steel Cooling Process

    Microstructure and Hardness Prediction at the Core of Steel Parts of Any Configuration during Quenching

    Dependence of the Heat Transfer Coefficient at Quenching on Diameter of Cylindrical Workpieces

    Bainite Formation at Low Temperatures in High C-Si Steel and its Mechanical Behavior

    Duration of the Transient Nucleate Boiling Process and Its Use for the Development of New Technologies

    Hot-Dip Galvanizing Process Using ZinQuench for Processing Advanced High-Strength Steels

    Microstructural Characterization of an AISI D2 Tool Steel Submitted to Cryogenic Treatment

    Laser Cladding and Heat Treatment of Ni–Co–Mo Maraging Steel

    Heat Treatments of Fe-Mn-Si Based Alloys: Mechanical Properties and Related Shape Memory Phenomena

    Isothermal Martensite Formation at Sub-Zero Temperatures

    Effect of Cooling Rate During Quenching on the Toughness of High Speed Steels

    Correlation Between Chemical Composition of Steel, Optimal Hardened Layer, and Optimal Residual Stress Distribution

    The Effect of Si on the Precipitates for Nb Bearing High Purity Ferritic Stainless Steel

    Control Strategies for an Inline Cooling Device in Hot Strip Processing of Innovative Steel Materials

    Simulation of Austenitization Processes in Fe–C Steels by Coupled Cellular Automaton and Finite Difference Methods

    The Effect of Prior Tempering on Sub-Zero Treatment to Reduce Retained Austenite

    Characterization of Highly Hardened Surface Layers on Austenitic Stainless Steels

    Influence of Laser Shock Processing on Surface Microstructures and Properties of Carbon Steel

    Mathematical Modeling and Computer Simulation of Fatigue Properties of Quenched and Tempered Steel

    Heat Transfer Stages Recognition by Boiling Acoustic During Quenching

    Metallo-Thermo-Mechanical Coupled Analysis of Quenching Process for the Plane Strain Problems

    Relative Comparison Method of Rolling Contact Fatigue Performance of Silicon Nitrides by Stepwise Loading Balls-on-Flat Test—Experimental Verification of Validity of Some Assumptions for the Method

    Long Life Fatigue Fracture Induced by Interior Inclusions for High Carbon Chromium Bearing Steels Under Rotating Bending

    Rolling Contact Fatigue Life Test Design and Result Interpretation Methods Maintaining Compatibility of Efficiency and Reliability

    Sub-Surface Initiated Rolling Contact Fatigue—Influence of Non-Metallic Inclusions, Processing History, and Operating Conditions

    Simulating Residual Stresses in Ribbons of Amorphous Metallic Alloys

    Fatigue from an Induced Defect: Experiments and Application of Different Multiaxial Fatigue Approaches

    Gigacycle Fatigue Properties of Bearing Steels

    A New Methodology for Predicting Fatigue Properties of Bearing Steels: From X-Ray Micro-Tomography and Ultrasonic Measurements to the Bearing Lives Distribution

    Quality Function Deployment Application on the Development of 100Cr6 Bearing Tubes

    Comparison of Inclusion Assessment Rating Standards in Terms of Results and Reliability by Numerical Simulation

    Microstructure and Fatigue Strength of the Bearing Steel 52100 after Shortened Bainitic Treatment

    Stress Field Evolution in a Ball Bearing Raceway Fatigue Spall

    Quantitative Relationship between Degree of Center Segregation and Large Carbide Size in Continuously Cast Bloom of High Carbon Chromium Bearing Steel

    The Role of Hydrogen on Rolling Contact Fatigue Response of Rolling Element Bearings

    Initiation Behavior of Crack Originated from Non-Metallic Inclusion in Rolling Contact Fatigue

    Modeling the Influence of Microstructure in Rolling Contact Fatigue

    Prediction of Quench-Hardness within the Whole Volume of Axially Symmetric Workpieces of Any Shape

    Case Depth and Static Capacity of Surface Induction-Hardened Rings

    Fatigue Crack Growth Simulation in Components with Random Defects

    Improving Control of a Quenching Process by Coupling Analysis Methods

    A New Method to Study the Effect of Cooling Rate on the Decomposition of Austenite in Advanced High Strength Sheet Steels

    Overview of Pearlitic Rail Steel: Accelerated Cooling, Quenching, Microstructure, and Mechanical Properties

    Finite Element Method Numerical Simulation of the Carburizing Process

    Generalized Equation for Cooling Time Evaluation and Its Verification by CFD Analysis

    Enhanced Hardenability through Application of Magnetic Fields

    Considering the Body-Centered Cubic Lattice Parameter of α-Fe Alloys versus Concentrations of Solved Elements

    Numerical Simulation of the Mechanical Properties of Cr12 Steel during Gas Quenching

    Analysis of Stress Concentration around Inclusions due to Thermally Induced Strain to the Steel Matrix

    Modeling of Quenching and Tempering Induced Phase Transformations in Steels

    Quenching Homogeneity and Intensity Improvement in Batch Mode High Pressure Gas Quenching

    Experimental Technique for Heat Transfer Measurements on Fast Moving Sprayed Surfaces

    Optimum Strategies to Reduce Residual Stresses and Distortion during the Metal Quenching Process

    Role of Thiosulfate on Chloride Breakdown Potential of Heat Treated Ni-18Cr-6Fe Alloys

    Formulation of a Guideline for the Determination of Heat Transfer Coefficient during Gas Quenching

    Severity of Quenching and Kinetics of Wetting of Nanofluids and Vegetable Oils

    A Complete System for Testing and Evaluation of Quenchants and Quenching Systems

    A Review on Modeling and Simulation of Quenching

    Technology and Applications of Alternately Timed Quenching Technology

    Effects of Cooling Rate Fluctuation on Cooling and Transformation Behavior of Steel upon Direct Quenching

    An Overview of Technology and Equipment for Hardening of Large Steel Parts

    Model of Solid State Transformations of Ductile Cast Iron GJS-600

    Spray Quenching in Induction Hardening Applications

    Quenchant Characterization by Cooling Curve Analysis

    Thermal Conductance of Ball Bearings in Vacuum: A Review

    Energy Efficient and Eco-friendly Intensively Quenched Limited Hardenability Low Alloy Steels

    Heat Transfer During Quenching and Assessment of Quench Severity—A Review

    An Investigation on Quenching Performance of Hot Alkaline Bath

    One More Discussion “What is Intensive Quenching Process?”

    Prediction of Distortion of Automotive Pinion Gears during Quenching Using CFD and FEA

    A Novel Approach to Model Moving Heat Sources

    Accurate Determination of Surface Heat Fluxes During Quenching Characterized by Boiling Water Heat Transfer

    The Influence of Surface Temperature on Rewetting Behavior During Immersion Quenching of Hollow and Solid Cylinders

    Analysis of the Segerberg Hardening Power Equation

    Application of thermodynamics and kinetics in the designing of new type TRIP steels concerning Al and P effects

    Starch-Based Quenchants as an Eco-Friendly Alternative to Quenching Oil

    Explanation of the Origin of Distortion and Residual Stress in Carburized Ring Using Computer Simulation

    Computer Simulation of Quenched Steel Working Stress

    Enhancement and Local Regulation of Metal Quenching Using Atomized Sprays

    Numerical Simulation of Residual Stresses in Quenched Steel Bodies Using Subroutines to Represent TTT and CCT Diagrams

    An Efficient Numerical Algorithm for the Prediction of Thermal and Microstructure Fields during Quenching of Steel Rods

    In-situ Fatigue Damage Investigations in Welded Metallic Components by Infrared Techniques

    Determination of Surface Heat Transfer Coefficients of Cr12MoV Steel Cylinder during High-Speed Gas Quenching at Atmospheric Pressure

    A Feasibility Study of the Use of Bismuth Bath to Replace Lead Bath as the Quenching Media for Steel Heat-Treating

    Comparison of Thermal Expansion Behavior of Phosphoric Irons with Conventional Concrete Reinforcement Steel

    Accelerated Cooling of Steel Plates: The Time Has Come

    Optimization of the Heat Treatment of a 17-4 PH Stainless Steel by Dilatometric Technique

    Cooling Characteristic Test of Quenching Media

    Relative Comparison Method of Rolling Contact Fatigue Performance of Silicon Nitrides by Stepwise Loading Balls-on-Flat Test—A Candidate for Standard Practice for Comparison of RCF Performance

    C-Crack Initiation in Quasi-Static and Impact Loading of a Bearing-Grade Silicon Nitride

    Gas-Jet Quenching

    Corrosion of Phosphoric Irons in Acidic Environments

    Electrochemical Techniques in Corrosion: Status, Limitations, and Needs

    Effect of Active Elements on the Oxidation Behavior of a FeCrAl Alloy Produced by Co-Rolling and Annealing

    Tribochemistry of Multiply Alkylated Cyclopentane Oils on Diamond-like Carbon (DLC) Coated Thrust Bearings

    Optimization of Energy Utilization and Productivity of Heat Treating Batch-Type Furnaces

    Study of Corrosion Initiation of a Steel Panel from a Defect in Coating Using Localized Electrochemical Impedance Spectroscopy (LEIS)

    Cyclic Oxidation Behavior of Co-rolled Al-Ferritic Stainless Steel

    Observation of Austenitic Grain Growth in Some Alloy Structural Steels

    Influence of Metallurgical Parameters on the Coercive Strength of Some Carbon Steels

    Are Multiaxial Fatigue Criteria Appropriate When Steels with Surface Defects are Subjected to Rolling Contact Fatigue

    Characteristics of Vanadium Alloyed Carbonitrided Steel for Rolling Bearing Applications

    A Review of Swedish Bearing Steel Manufacturing and Quality Assurance of Steel Products

    Experiences in Using Ultrasonic Testing of Bearing Steel for Demanding Applications

    Rapid Evaluation of Inclusions in Bearing Steel

    Influence of Steel Making and Further Processing on the Distortion of Bearing Steel Components

    Developing ASTM E 2283: Standard Practice for Extreme Value Analysis of Nonmetallic Inclusions in Steel and Other Microstructural Features

    Measuring the Field Corrosion Activity of Bridge Decks Built with Bare and Epoxy Coated Steel

    Statistical Analysis of Nonmetallic Inclusions for the Estimation of Rolling Contact Fatigue Range and Quality Control of Bearing Steel

    X-ray Microdiffraction for the Analysis of Bearing Operation Conditions

    Study of Vacuum Carbon-Deoxidization of High Carbon Chromium Bearing Steel

    Cleanliness of Bearing Steels and Fatigue Life of Rolling Contacts

    New Development in Through Hardened Bearing Steel Grades for Use in Contaminated Lubrication

    Evaluation of Methodologies Used for Establishing Soil-Water Characteristic Curve

    Evaluation Procedures of Nonmetallic Inclusions in Steel for Highly Reliable Bearings

    Study on Flaking Process in Bearings by White Etching Area Generation

    Micro-Plastic Material Model and Residual Fields in Rolling Contacts

    Development of a Supermartensitic Stainless Steel Microalloyed with Niobium

    Mechanical Characterization of Cryogenically Treated Music Wire

    A Statistical Method to Assess the Reliability of Cleanness Measurements for High Quality Bearing Steels

    Performance Evaluation of “Duplex Hardened” Bearings for Advanced Turbine Engine Applications

    Plasma Assisted Heat Treating Processes of Bearing Components

    Tribological Behavior and Corrosion Resistance of Kolsterized AISI316L Austenitic Stainless Steel: Existing Applications in the Automotive Industry

    The Challenge of Multiple Particles in Extreme Value Inclusion Rating

    A Novel Method to Evaluate the Influence of Hydrogen on Fatigue Properties of High Strength Steels

    Comparison of Fatigue Performances of 32CrMoV13 and M50 Steels in Presence of Surface Indents

    Continued Developments in Easily Carburizable High Speed Steel Alloys

    Characterization of Wear and Surface Reaction Layer Formation on Aerospace Bearing Steel M50 and a Nitrogen-alloyed Stainless Steel

    Radioactivity Inspections Applied to the Steelmaking Industry

    The Mechanical Characterization of Low Work Hardening, High Strength Steel

    Corrosion Behavior of Heat-Treated Duplex Stainless Steels in Saturated Carbon Dioxide-Chloride Solutions

    A Method for Calculation of Fastener Torque Specifications Which Includes Statistical Tolerancing

    A Procedure for Calculation of Torque Specifications for Bolted Joints with Prevailing Torque

    Steel Superstrengthening Phenomenon

    Effect of Heat Treatment on the Mechanical Properties of ASTM A 890 Gr6A Super Duplex Stainless Steel

    The Technical Foundations of a Unified Adjusted Reference Temperature for RPV Fracture Toughness