SEDL / Topics / Iron and Steel Products / Coated Steel Products / All JAI

• Comparison of the Laser and Electron Beam Welding of Steel Sheets Treated by Nitro-Oxidation
• Mechanical and Microstrutural Characterization of Weldments of Ferritic Stainless Steel AISI 444 Using Austenitic Stainless Steels Filler Metals
• Intensive Quenching of Steel Parts and Tools in Water Salt Solutions of Optimal Concentration
• Effect of Accuracy of Temperature Measurements on Determination of Heat Transfer Coefficient during Quenching in Liquid Media
• Experimental Investigation of Microstructural and Mechanical Properties of New Steels for Large Blooms
• Mechanical Properties of ASTM A283 Carbon Steel Subjected to the Sulphidation Process
• Modeling and Simulation of Film and Transitional Boiling Processes on a Metallic Cylinder During Quenching
• New Cast Iron Alloys with High Wear Resistance at Elevated Temperatures
• Impact Properties of Vacuum Heat Treated AISI D2 and 8 % Cr Cold Work Tool Steels
• Effects of Austenitizing Temperatures on Primary Structure Transformation in Cast High-Speed Steel of M2 Type Inoculated with Powder Additions of W and TiB₂
• Modeling of Hardness of Low Alloy Steels by Means of Neural Networks
• CFD-Simulation of Film Boiling at Steel Cooling Process
• Microstructure and Hardness Prediction at the Core of Steel Parts of Any Configuration during Quenching
• Dependence of the Heat Transfer Coefficient at Quenching on Diameter of Cylindrical Workpieces
• Bainite Formation at Low Temperatures in High C-Si Steel and its Mechanical Behavior
• Duration of the Transient Nucleate Boiling Process and Its Use for the Development of New Technologies
• Hot-Dip Galvanizing Process Using ZinQuench for Processing Advanced High-Strength Steels
• Microstructural Characterization of an AISI D2 Tool Steel Submitted to Cryogenic Treatment
• Laser Cladding and Heat Treatment of Ni–Co–Mo Maraging Steel
• Heat Treatments of Fe-Mn-Si Based Alloys: Mechanical Properties and Related Shape Memory Phenomena
• Isothermal Martensite Formation at Sub-Zero Temperatures
• Effect of Cooling Rate During Quenching on the Toughness of High Speed Steels
• Correlation Between Chemical Composition of Steel, Optimal Hardened Layer, and Optimal Residual Stress Distribution
• The Effect of Si on the Precipitates for Nb Bearing High Purity Ferritic Stainless Steel
• Control Strategies for an Inline Cooling Device in Hot Strip Processing of Innovative Steel Materials
• Simulation of Austenitization Processes in Fe–C Steels by Coupled Cellular Automaton and Finite Difference Methods
• The Effect of Prior Tempering on Sub-Zero Treatment to Reduce Retained Austenite
• Characterization of Highly Hardened Surface Layers on Austenitic Stainless Steels
• Influence of Laser Shock Processing on Surface Microstructures and Properties of Carbon Steel
• Mathematical Modeling and Computer Simulation of Fatigue Properties of Quenched and Tempered Steel
• Heat Transfer Stages Recognition by Boiling Acoustic During Quenching
• Metallo-Thermo-Mechanical Coupled Analysis of Quenching Process for the Plane Strain Problems
• Long Life Fatigue Fracture Induced by Interior Inclusions for High Carbon Chromium Bearing Steels Under Rotating Bending
• Rolling Contact Fatigue Life Test Design and Result Interpretation Methods Maintaining Compatibility of Efficiency and Reliability
• Sub-Surface Initiated Rolling Contact Fatigue—Influence of Non-Metallic Inclusions, Processing History, and Operating Conditions
• Simulating Residual Stresses in Ribbons of Amorphous Metallic Alloys
• Fatigue from an Induced Defect: Experiments and Application of Different Multiaxial Fatigue Approaches
• Gigacycle Fatigue Properties of Bearing Steels
• A New Methodology for Predicting Fatigue Properties of Bearing Steels: From X-Ray Micro-Tomography and Ultrasonic Measurements to the Bearing Lives Distribution
• Quality Function Deployment Application on the Development of 100Cr6 Bearing Tubes
• Comparison of Inclusion Assessment Rating Standards in Terms of Results and Reliability by Numerical Simulation
• Microstructure and Fatigue Strength of the Bearing Steel 52100 after Shortened Bainitic Treatment
• Stress Field Evolution in a Ball Bearing Raceway Fatigue Spall
• Quantitative Relationship between Degree of Center Segregation and Large Carbide Size in Continuously Cast Bloom of High Carbon Chromium Bearing Steel
• The Role of Hydrogen on Rolling Contact Fatigue Response of Rolling Element Bearings
• Initiation Behavior of Crack Originated from Non-Metallic Inclusion in Rolling Contact Fatigue
• Modeling the Influence of Microstructure in Rolling Contact Fatigue
• Prediction of Quench-Hardness within the Whole Volume of Axially Symmetric Workpieces of Any Shape
• Case Depth and Static Capacity of Surface Induction-Hardened Rings
• Improving Control of a Quenching Process by Coupling Analysis Methods
• A New Method to Study the Effect of Cooling Rate on the Decomposition of Austenite in Advanced High Strength Sheet Steels
• Overview of Pearlitic Rail Steel: Accelerated Cooling, Quenching, Microstructure, and Mechanical Properties
• Finite Element Method Numerical Simulation of the Carburizing Process
• Generalized Equation for Cooling Time Evaluation and Its Verification by CFD Analysis
• Enhanced Hardenability through Application of Magnetic Fields
• Considering the Body-Centered Cubic Lattice Parameter of α-Fe Alloys versus Concentrations of Solved Elements
• Numerical Simulation of the Mechanical Properties of Cr12 Steel during Gas Quenching
• Analysis of Stress Concentration around Inclusions due to Thermally Induced Strain to the Steel Matrix
• Modeling of Quenching and Tempering Induced Phase Transformations in Steels
• Quenching Homogeneity and Intensity Improvement in Batch Mode High Pressure Gas Quenching
• Experimental Technique for Heat Transfer Measurements on Fast Moving Sprayed Surfaces
• Optimum Strategies to Reduce Residual Stresses and Distortion during the Metal Quenching Process
• Role of Thiosulfate on Chloride Breakdown Potential of Heat Treated Ni-18Cr-6Fe Alloys
• Formulation of a Guideline for the Determination of Heat Transfer Coefficient during Gas Quenching
• Severity of Quenching and Kinetics of Wetting of Nanofluids and Vegetable Oils
• A Complete System for Testing and Evaluation of Quenchants and Quenching Systems
• A Review on Modeling and Simulation of Quenching
• Technology and Applications of Alternately Timed Quenching Technology
• Effects of Cooling Rate Fluctuation on Cooling and Transformation Behavior of Steel upon Direct Quenching
• An Overview of Technology and Equipment for Hardening of Large Steel Parts
• Spray Quenching in Induction Hardening Applications
• Quenchant Characterization by Cooling Curve Analysis
• Energy Efficient and Eco-friendly Intensively Quenched Limited Hardenability Low Alloy Steels
• Heat Transfer During Quenching and Assessment of Quench Severity—A Review
• An Investigation on Quenching Performance of Hot Alkaline Bath
• One More Discussion “What is Intensive Quenching Process?”
• Prediction of Distortion of Automotive Pinion Gears during Quenching Using CFD and FEA
• A Novel Approach to Model Moving Heat Sources
• Accurate Determination of Surface Heat Fluxes During Quenching Characterized by Boiling Water Heat Transfer
• The Influence of Surface Temperature on Rewetting Behavior During Immersion Quenching of Hollow and Solid Cylinders
• Analysis of the Segerberg Hardening Power Equation
• Application of thermodynamics and kinetics in the designing of new type TRIP steels concerning Al and P effects
• Starch-Based Quenchants as an Eco-Friendly Alternative to Quenching Oil
• Explanation of the Origin of Distortion and Residual Stress in Carburized Ring Using Computer Simulation
• Computer Simulation of Quenched Steel Working Stress
• Enhancement and Local Regulation of Metal Quenching Using Atomized Sprays
• Numerical Simulation of Residual Stresses in Quenched Steel Bodies Using Subroutines to Represent TTT and CCT Diagrams
• An Efficient Numerical Algorithm for the Prediction of Thermal and Microstructure Fields during Quenching of Steel Rods
• In-situ Fatigue Damage Investigations in Welded Metallic Components by Infrared Techniques
• Determination of Surface Heat Transfer Coefficients of Cr12MoV Steel Cylinder during High-Speed Gas Quenching at Atmospheric Pressure
• A Feasibility Study of the Use of Bismuth Bath to Replace Lead Bath as the Quenching Media for Steel Heat-Treating
• Comparison of Thermal Expansion Behavior of Phosphoric Irons with Conventional Concrete Reinforcement Steel
• Accelerated Cooling of Steel Plates: The Time Has Come
• Optimization of the Heat Treatment of a 17-4 PH Stainless Steel by Dilatometric Technique
• Cooling Characteristic Test of Quenching Media
• Gas-Jet Quenching
• Corrosion of Phosphoric Irons in Acidic Environments
• Electrochemical Techniques in Corrosion: Status, Limitations, and Needs
• Effect of Active Elements on the Oxidation Behavior of a FeCrAl Alloy Produced by Co-Rolling and Annealing
• Optimization of Energy Utilization and Productivity of Heat Treating Batch-Type Furnaces
• Study of Corrosion Initiation of a Steel Panel from a Defect in Coating Using Localized Electrochemical Impedance Spectroscopy (LEIS)
• Cyclic Oxidation Behavior of Co-rolled Al-Ferritic Stainless Steel
• Observation of Austenitic Grain Growth in Some Alloy Structural Steels
• Influence of Metallurgical Parameters on the Coercive Strength of Some Carbon Steels
• Are Multiaxial Fatigue Criteria Appropriate When Steels with Surface Defects are Subjected to Rolling Contact Fatigue
• Characteristics of Vanadium Alloyed Carbonitrided Steel for Rolling Bearing Applications
• A Review of Swedish Bearing Steel Manufacturing and Quality Assurance of Steel Products
• Experiences in Using Ultrasonic Testing of Bearing Steel for Demanding Applications
• Rapid Evaluation of Inclusions in Bearing Steel
• Influence of Steel Making and Further Processing on the Distortion of Bearing Steel Components
• Developing ASTM E 2283: Standard Practice for Extreme Value Analysis of Nonmetallic Inclusions in Steel and Other Microstructural Features
• Measuring the Field Corrosion Activity of Bridge Decks Built with Bare and Epoxy Coated Steel
• Statistical Analysis of Nonmetallic Inclusions for the Estimation of Rolling Contact Fatigue Range and Quality Control of Bearing Steel
• X-ray Microdiffraction for the Analysis of Bearing Operation Conditions
• Study of Vacuum Carbon-Deoxidization of High Carbon Chromium Bearing Steel
• Cleanliness of Bearing Steels and Fatigue Life of Rolling Contacts
• New Development in Through Hardened Bearing Steel Grades for Use in Contaminated Lubrication
• Evaluation of Methodologies Used for Establishing Soil-Water Characteristic Curve
• Evaluation Procedures of Nonmetallic Inclusions in Steel for Highly Reliable Bearings
• Study on Flaking Process in Bearings by White Etching Area Generation
• Micro-Plastic Material Model and Residual Fields in Rolling Contacts
• Development of a Supermartensitic Stainless Steel Microalloyed with Niobium
• A Statistical Method to Assess the Reliability of Cleanness Measurements for High Quality Bearing Steels
• Performance Evaluation of “Duplex Hardened” Bearings for Advanced Turbine Engine Applications
• Plasma Assisted Heat Treating Processes of Bearing Components
• Tribological Behavior and Corrosion Resistance of Kolsterized AISI316L Austenitic Stainless Steel: Existing Applications in the Automotive Industry
• The Challenge of Multiple Particles in Extreme Value Inclusion Rating
• A Novel Method to Evaluate the Influence of Hydrogen on Fatigue Properties of High Strength Steels
• Comparison of Fatigue Performances of 32CrMoV13 and M50 Steels in Presence of Surface Indents
• Continued Developments in Easily Carburizable High Speed Steel Alloys
• Characterization of Wear and Surface Reaction Layer Formation on Aerospace Bearing Steel M50 and a Nitrogen-alloyed Stainless Steel
• Radioactivity Inspections Applied to the Steelmaking Industry
• The Mechanical Characterization of Low Work Hardening, High Strength Steel
• Corrosion Behavior of Heat-Treated Duplex Stainless Steels in Saturated Carbon Dioxide-Chloride Solutions
• Steel Superstrengthening Phenomenon
• Effect of Heat Treatment on the Mechanical Properties of ASTM A 890 Gr6A Super Duplex Stainless Steel
• The Technical Foundations of a Unified Adjusted Reference Temperature for RPV Fracture Toughness