ASTM International - Digital Library - CCA - Construction

SEDL / Topics / Construction / All CCA

A New Method for Evaluating the Risk of DEF
A Device for Studying Fresh Concrete Friction
Measurement of Particle Size Distribution in Portland Cement Powder: Analysis of ASTM Round Robin Studies
Effect of Finishing Practices on Performance of Concrete Containing Slag and Fly Ash as Measured by ASTM C 672 Resistance to Deicer Scaling Tests
Influence of Specimen Geometry, Orientation of Casting Plane, and Mode of Concrete Consolidation on Expansion Due to ASR
Effect of Non-Uniform Straining in Concrete Compressive Strength Tests
Resistance to Freezing and Thawing Cycles and Scaling Resistance of Very High Early Strength Concrete
Pre-Soaked Lightweight Aggregates as Additives for Internal Curing of High-Strength Concretes
Modeling Drying Shrinkage Stress Gradients in Concrete
New Results on Early-Age Cracking Risk of Special Concrete
Potential for Restrained Shrinkage Cracking of Concrete and Mortar
Unthermostated Multichannel Heat Conduction Calorimeter
Polycarboxylate Polymers and Blends in Different Cements
Influence of a Long-Term Retarder on the Hydration of Clinker and Cement
Control of Cracking in Bridge Decks: Observations from the Field
Cement and Superplasticizer Combinations: Compatibility and Robustness
A New Unbonded Capping Practice for Evaluating the Compressive Strength of Controlled Low-Strength Material Cylinders
Freezing and Thawing and Alkali-Aggregate Reaction Weakens Lightweight, Structural Concrete in North Dakota
Effect of Temperature-Match-Curing on Freeze-Thaw and Scaling Resistance of High-Strength Concrete
Relationship Between Particle Shape and Void Content of Fine Aggregate
Measured Internal Temperatures in Concrete Exposed to Outdoor Cyclic Freezing
Use of Ground Granulated Blast Furnace Slag for Reduction of Expansion Due to Delayed Ettringite Formation
Relationship Between Gas Adsorption and the Shrinkage and Creep of Recycled Aggregate Concrete
Role of Fly Ash and Aluminum Addition on Ettringite Formation in Lime-Remediated Mine Tailings
Crack Offset Corrections to Post-crack Performance Parameters Obtained from Third-point Loaded Fiber Reinforced Shotcrete Beams
Proposed Universal Accelerated Test for Alkali-Aggregate Reaction The Concrete Microbar Test
Treatment of Medium- to Coarse-Grained Sands by Fine-Grained Portland Cement (FGPC) as an Alternative Grouting Material to Silicate-Ester Grouts
Use of Discrete Fibers for Tensile Reinforcement of an Alternative Pavement Foundation with Recycled Aggregate
Measuring the Effective Air Void Content of Portland Cement Pervious Pavements
Strength and Sulfate Resistance of Concrete Made With High Alumina Cement, Type 10 Portland Cement, Type 10 Portland Cement Plus Fly Ash and Type 50 Portland Cement
The Autoclave Soundness Test Mischaracterizes Cement-Fly Ash Blends By Introducing Alkali-Quartz Reaction
The Relative Performance of Abrasion Apparatus In Accordance With BS 8204 (Part 2:1999)
Non-Destructive Tests for the Evaluation of Concrete Exposed to High Temperatures
The Damage Rating Index Method for ASR Affected Concrete—A Critical Review of Petrographic Features of Deterioration and Evaluation Criteria
Use of Cement By-pass Dust in Flowable Fill Mixtures
ASTM Symposium on Prescriptive and Performance Specifications for Hydraulic Cements and Their Use in Concrete: Issues and Implications for Standards Development
Laboratory Assessment of the Potential Rate of ASR Expansion of Field Concrete
Dependence of Rate of Absorption on Degree of Saturation of Concrete
Measurement of the Alkali Content of Concrete Using Hot-Water Extraction
Analysis of Variables Influencing the Average-Residual Strength of Fiber-Reinforced Concrete
On the Effect of Coarse Aggregate Fraction and Shape on the Rheological Properties of Self-Compacting Concrete
Use of Copper Slag and Cement By-Pass Dust as Cementitious Materials
Analysis of the Granular Structures of Aggregates Using Solid Volume Measurement of Elementary Fractions
Production and Use of Calcined Natural Pozzolans in Concrete
Proportioning Concrete Mixes with Quarry Wastes
Setting of Cement and Concrete
Case Study in Performance Testing of Hydraulic Cement
The Influence of Strain Rate on Performance of Fiber-Reinforced Concrete Loaded in Flexure
The Omani Artificial Pozzolans (Sarooj)
The Influence of Thickness on Performance of Fiber-Reinforced Concrete in a Round Determinate Panel Test
Testing Abrasion Resistance of High-Strength Concrete
Cementitious Composites Containing Recycled Tire Rubber: An Overview of Engineering Properties and Potential Applications
Effect of Controlled Environmental Conditions on Durability Index Parameters of Portland Cement Concretes
User and Producer Perspectives on ASTM C 1157
Direct Spectrophotometric Determination of Aluminum Oxide in Portland Cement and Cement Clinker
A Simplified Shear Test for the Adhesion of FRP Composites to Concrete
Specimen and Aggregate Size Effect on Concrete Compressive Strength
Modified Washington Hydraulic Fracture Test to Determine D-Cracking Susceptible Aggregate
Properties of Concrete with Ground Ultrafine Phosphorus Slag
Quantitative Description of Coarse Aggregate Volume Fraction Gradients
A Kinetic-Based Method for Interpreting ASTM C 1260
Evaluation of the Potential of Densified Silica Fume to Cause Alkali-Silica Reaction in Cementitious Matrices Using a Modified ASTM C 1260 Test Procedure
Chemical and Petrographic Analyses and ASTM Test Procedures for the Study of Delayed Ettringite Formation
Development of Performance Tests for Sulfate Attack on Cementitious Systems
Determining Elastic Properties of Concrete Using Vibrational Resonance Frequencies of Standard Test Cylinders
Alkali-Silica Reaction in Concrete Caused by Densified Silica Fume Lumps: A Case Study
Field Study of the Setting Behavior of Fresh Concrete
A Practical Method to Solve Slump Loss Problem in PNS Superplasticized High-Performance Concrete
The Permeability of Cement Systems to Chloride Ingress and Related Test Methods
Strength and Density of Laboratory-Prepared RCC Specimens: Effect of Compaction Procedure
Delayed Ettringite Formation at Brewer Stadium, Boone, North Carolina
Introduction to the Symposium on Developments in Test Methods for Alkali-Silica Reaction
Autoradiographic Methods for Identifying Alkali-Silica Reaction Gel
Limits on Alkali Content in Cement—Results from a Field Study
Proposed New Test Procedure for Measuring Alkali-Silica Expansion Produced by Hydraulic Cement
Kinetics and Microstructural Changes Associated with Mortar Expansion
Quantitative Petrographic Technique for Concrete Damage Due to ASR: Experimental and Application
Influence of Silica Fume on the Stresses Generated by Alkali-Silica Reaction
The Use of Fly Ash in Concrete: Classification by Composition
A New Test Method for Fiber-Reinforced Concrete
Mechanical Properties and Freezing and Thawing Durability of Polypropylene Fiber-Reinforced Shotcrete Incorporating Silica Fume and High Volumes of Fly Ash
Evaluation of the Effect of Portland Cement Alkali Content, Fly Ash, Ground Slag, and Silica Fume on Alkali-Silica Reactivity
Comparison of Field Observations with Laboratory Test Results on Concretes Undergoing Alkali-Silica Reaction
Comparison of Results from C 441 and C 1293 with Implications for Establishing Criteria for ASR-Resistant Concrete
Use of the Accelerated Mortar Bar Test for Evaluating the Efficacy of Mineral Admixtures for Controlling Expansion due to Alkali-Silica Reaction
Using Accelerated Test Methods to Specify Admixtures to Mitigate Alkali-Silica Reactivity
Evaluation of Laboratory Test Methods for Alkali-Silica Reactivity
Multi-Laboratory Study of the Accelerated Mortar Bar Test (ASTM C 1260) for Alkali-Silica Reaction
Anhydrite in High Sulfur Trioxide (SO³)/Alkali Clinkers: Dissolution Kinetics and Influence on Concrete Durability
Delayed Ettringite Formation (DEF) in Structural Lightweight Aggregate Concrete: Effect of Curing Temperature, Moisture, and Silica Fume Content
Assessing the Distribution of Sulfate in Portland Cement and Clinker and Its Influence on Expansion in Mortar
Evaluation of Tests for Toughness/Abrasion Resistance and Durability/Soundness of Coarse Aggregates
Evaluation of Precision of a Nuclear Gauge for Measurement of Water and Cement Content of Fresh Concrete
Towards Standardization of a Rapid Chloride Conduction Test for Concrete
Early Shrinkage Development in a High Performance Concrete
Review of the Thermodynamic Stability of Ettringite
Evaluation of the Potential for Internal Sulfate Attack Through Adaptation of ASTM C 342 and the Duggan Test
Curing Practices and Internal Sulfate Attack—The European Experience
Mineralogy and Performance of Cement Based on High Sulfate Clinker
Evaluation and Mitigating Measures for Premature Concrete Distress in Texas Department of Transportation Concrete Elements
Characterization of High-Calcium Fly Ashes and Their Potential Influence on Ettringite Formation in Cementitious Systems
Possible Mechanisms of Expansion of Concrete Exposed to Elevated Temperatures During Curing (Also Known as DEF) and Implications for Avoidance of Field Problems
Correlation Between Materials Finer Than No. 200 Sieve and Sand Equivalent Tests for Natural and Crushed Stone Sands
Effect of Elastic Modulus of Capping Material on Measured Strength of High-Strength Concrete Cylinders
Two-Hour Zero Slump Loss, High-Strength Pumpable Concrete—An Application Case in Dam Structure
Modified Slump Test to Measure Rheological Parameters of Fresh Concrete
Effects of Superplasticizer, Retarding Agent, and Silica Fume on the Air Permeability of High-Performance Concrete
A Statistical Analysis of Hot and Warm Accelerated Concrete Curing Methods
Ultrasonic Testing to Determine Water-Cement Ratio for Freshly Mixed Concrete
Rheology of Cement Paste and Concrete
A Systematic Method to Determine Optimal Specimen Geometry for Measuring Concrete Fracture Properties by the Peak-Load Method
Multi-Scale Microstructural Modeling of Concrete Diffusivity: Identification of Significant Varibles
Evaluation of Rubber-Filled Concrete and Correlation Between Destructive and Nondestructive Testing Results
Simple Field Tests to Characterize Fluidity and Washout Resistance of Structural Cement Grout
Changes in ASTM Type II Portland Cement from 1940 to 1994
Effect of Thermal Variations on Bond Strength of Fusion-Bonded Epoxy-Coated Bars
Influence of Penetrating Chlorides on the Pore Structure of Structural Concrete
Expansion of Cement Containing Crystalline Magnesia With and Without Fly Ash and Slag
Soundness Characteristics of Portland Cement-Fly Ash Mixtures
Expansion of Cements: Cause and Control
Reappraisal of the Autoclave Expansion Test
Standards for Fracture Toughness Testing of Rock and Manufactured Ceramics: What Can We Learn for Concrete?
Do We Need a Standard Concrete Fracture Mechanics Test?
Evaluation of Laboratory Drying Procedures Relevant to Field Conditions for Concrete Sorptivity Measurements
Test Method for the Potential Release of Hydrogen Gas from Silica Fume
Hydrogen Evolution in Concrete Due to Free Silicon Metal in Microsilica
Introduction to Symposium on Concrete Fracture Mechanics Standards
An Overview of the Fracture Mechanics of Concrete
The Role for Fracture Mechanics in Reinforced Concrete Design
Fracture Mechanics Testing for Structural Steels
Compressive Strength of Small Concrete Specimens Confined with Fiberglass Laminates
Durability Findings from Case Studies of Marine Concrete Structures
Prevention of Damage Due to Alkali-Aggregate Reaction (AAR) in Concrete Construction—Canadian Approach
Expandability of Solid-Volume-Reducing Reactions of Alkali-Magnesite and Alkali-Dolomite
Thermal Properties of Commercially Available High-Strength Concretes
A Procedure for Testing Concrete Masonry Unit (CMU) Mixes
Frost Deicer Salt Scaling Testing of Concrete: Effect of Drying and Natural Weathering
The Strength and Microstructure of High-Strength Paste Containing Silica Fume
Durability of Reinforced Lightweight Mortars with Corrosion Inhibitors
Performance and Correlation of the Properties of Fly Ash Cement Concrete
Tensile and Compressive Strength of Silica Fume-Cement Pastes and Mortars
Precision of Tests for Assessment of the Deicer Salt Scaling Resistance of Concrete
Mechanical Properties of Normal to High-Strength Steel Fiber-Reinforced Concrete
Factors Influencing Flow and Strength of Standard Mortars and Reappraisal of ASTM Test Methods for Fly Ash
Break-Off Test for High-Strength Concrete
The Use of the Flow Length Concept to Assess the Efficiency of Air Entrainment with Regards to Frost Durability: Part I—Description of the Test Method
The Use of the Flow Length Concept to Assess the Efficiency of Air Entrainment with Regards to Frost Durability: Part II—Experimental Results
Alkali Limits for Prevention of Alkali-Silica Reaction: A Brief Review of their Development
Comparison of Five Standards on Ultrasonic Pulse Velocity Testing of Concrete
Improving Initial Strength of a Concrete made with Type 20M Cement
Monitoring the Influence of Water and Ionic Ingress on Cover-Zone Concrete Subjected to Repeated Absorption
Selectivity of Alkaline Activators for the Activation of Slags
Quantitative Petrographic Evaluation of Fine Aggregate
Some Applications of AC Impedance Spectroscopy in Cement Research
Crushed Tile Coarse Aggregate Concrete
High-Strength Concrete Properties Derived from Compressive Strength Values
The Passivation of Reinforcing Steel Exposed to Synthetic Pore Solution and the Effect of Calcium-Nitrite Inhibitor
Survey of North American Portland Cements: 1994
Introduction to Symposium on Polymer-Modified Concrete and Mortars: Building on the Past and Moving into the Future
Curing Stresses in Polymer-Modified Repair Mortars
A Latex-Modified Concrete Overlay on Plain-Jointed Concrete Pavement
Self-Smoothing Industrial Floors
Properties of a Non-Film Forming Latex in Ceramic Tile Mortar
Acrylic Powder Modified Portland Cement
Comparison of Liquid Dispersions with Spray-Dried Acrylic Polymers as Modifiers of a Cement-Based Patching Material
Setting Times of Fly Ash and Slag-Cement Concretes as Affected by Curing Temperature
Efficiency of Natural Greek Pozzolan in Chloride-Induced Corrosion of Steel Reinforcement
Why the Accelerated Mortar Bar Method ASTM C 1260 is Reliable for Evaluating the Effectiveness of Supplementary Cementing Materials in Suppressing Expansion Due to Alkali-Silica Reactivity
Limitations of the Carbonate Extraction/UV Spectrophotometric Method for Determining Lignosulfonate-Based Admixtures in Hardened Concrete
Results of an Interlaboratory Test Program: Compressive Strength of Concrete
Determination of a Nitrite-Based Corrosion Inhibitor in Plastic and Hardened Concrete
Determination of Slag and Fly Ash Content in Hardened Concrete
Determination of Silica Fume in Unhydrated, Blended, Dry-Packaged Mixture, and Hydrated Mortar
Rapid Determination of the Fly Ash Content of Construction Materials
Determination of Slag and Pulverized Fuel Ash in Hardened Concrete—The Method of Last Resort Revisited
Determination of Blast-Furnace Slag Content in Hardened Concrete by Electrical Conductivity Methods
A New Consecutive Dissolution Method for the Analysis of Slag Cements
Determination of Silica-Fume Content in Hardened Concrete by AC Impedance Spectroscopy
Laboratory Measurements of Corrosion Activity of Steel Reinforcement in Concrete Using Simple Equipment
Proportioning of Fly Ash Cement Concrete Mixes
Crack Counts in Air-Entrained and Non-Air-Entrained Concrete Subjected to Accelerated and Fog-Room Curing
Optimization of the Composition of a High-Performance Concrete
Determination of Water Content of Fresh Concrete Using a Microwave Oven
The Effects of Different Cementing Materials and Curing on Concrete Scaling
The Influence of Size and Hardness of Sand Particles and Their Proportions on the Friction Characteristics of Cement Mortars: A Laboratory Study
Mineral Admixtures Contribution to the Development of Heat of Hydration and Strength
The Effect of Mold Size and Mold Material on Compressive Strength Measurement Using Concrete Cylinders
Cement Strength Variations: Defining the Solution
Effect of Capping Materials and Procedures on the Measured Compressive Strength of High-Strength Concrete
Calorimetric Study of Cement Blends Containing Fly Ash, Silica Fume, and Slag at Elevated Temperatures
Use of High Volumes of Class C and Class F Fly Ash in Concrete
Strength Measurement of Concrete Using Different Cylinder Sizes: A Statistical Analysis
Accelerated Sulfate Attack on Concrete in a Hot Climate
Construction Materials Made with Coal Combustion By-Products
Influence of Sulfate Ions on Chloride-Induced Reinforcement Corrosion in Portland and Blended Cement Concretes
Hexavalent Chromium in Portland Cement
Effect of Curing on Shrinkage and Expansion of Surface Repair Mortars
Rapid Chloride Permeability Testing of Silica-Fume Concrete
Effect of Elevated Curing Temperature on the Chloride Permeability of High-Strength Lightweight Concrete
Limits of Application of the ASTM C 227⁴ Mortar Bar Test. Comparison with Two Other Standards on Alkali Aggregate Reactivity
A New Nondestructive Testing (NDT): Torsion Test to Evaluate Compressive Strength in Concrete Structures
Use of Fly Ash in Heat-cured Concrete and the Effect of Post-curing Storage Regimes on Strength, Modulus of Elasticity, and Freezing-thawing Durability
Effect Of Three Zeolite-containing Natural Pozzolanic Materials On Alkali-Silica Reaction
Evaluation of the Statistical Significance of a Regression and Selection of the Best Regression Using the Coefficient of Determination R²
Use of Dynamic Nondestructive Test Methods to Monitor Concrete Deterioration Due to Alkali-Silica Reaction
A Rapid Method for Measuring the Acid-Soluble Chloride Content of Powdered Concrete Samples
Effects of Testing Rate and Age on ASTM C 1018 Toughness Parameters and their Precision for Steel Fiber-Reinforced Concrete
Evaluation of Cylinder Size and Capping Method in Compression Strength Testing of Concrete
A Comparison of Two Methods for Measuring the Chloride Ion Permeability of Concrete
Observations on Rubberized Concrete Behavior
Development of Precision and Bias Statements for Testing Drilled Cores in Accordance with ASTM C 42
Mortar Workability Apparatus: A New Approach
Introduction to Symposium on Current Trends in Cement Standards
Portland Cement Specifications: Performance, Prescription, and Prediction
Why Performance Standards for Hydraulic Cement?
Importance of Precision Statements in Developing Performance Standards for Cement
Analysis of a Canadian Database of Mortar-Cube Strengths: The Move Toward a Canadian Performance Standard for Portland Cement
Cement Strength and Concrete Strength—An Apparition or a Dichotomy?
European (EN) and World (ISO) Standards—Comparison with ASTM Standards
International Development of Standards for Cements
Blended Cement According to ENV 197 and Experiences in Germany
The Special Features of Cement Standards in China
The New Cement Standard in Australia—Its Implication and Further Development
Aggregate Mixtures for Least-Void Content for Use in Polymer Concrete
Evaluation of Granulated Blast Furnace Slag as a Cementitious Admixture—A Case Study
Task Force Report on ASTM D 2419: Sand Equivalent Value of Soils and Fine Aggregate, Prepared for ASTM Subcommittee D 04.51
Toughness Behavior of Fiber-Reinforced Rapid-Set Materials: A Preliminary Study
Properties of Zeolite as an Air-Entraining Agent in Cellular Concrete
Development of a New Method for the Determination of Iron Content of Hydraulic Cementitious Materials and Pozzolans
Sludge Ash Pellets as Coarse Aggregates in Concrete
Are Small Aggregates Really Better for Making High-Strength Concrete?
Static Modulus of Elasticity of High-Strength Concrete from Pulse Velocity Tests
Properties of High-Strength Concrete Containing Light-, Normal-, and Heavyweight Aggregate
Comparison of the Air Contents of Freshly Mixed and Hardened Concretes
Comparison of Air Contents in Fresh and Hardened Concretes Using Different Airmeters
Testing Fly Ash in Mortars for Air-Entrainment Characteristics
Evaluation of Concrete Mixtures for Underwater Pile Repairs
An Investigation of the Minimum Expected Uncertainty in the Linear Traverse Technique
Reduction in Mortar and Concrete Expansion with Reactive Aggregates Due to Alkali Leaching
The Development of ASTM Method C 1012 with Recommended Acceptance Limits for Sulfate Resistance of Hydraulic Cements
A Rapid Autoclave Mortar Bar Method to Determine the Potential Alkali-Silica Reactivity of St. Lawrence Lowlands Carbonate Aggregates (Quebec, Canada)
Troubleshooting Retarded Concrete: Understanding the Role of Cement and Admixtures Through an Interdisciplinary Approach
Cement Clinker Characterization by Scanning Electron Microscopy
An Analysis of Factors Affecting Particle-Size Distribution of Hydraulic Cements
Microstructural Development in a High-Strength Concrete Containing a Ternary Cementitious System
Improvement of Concrete Strength Statistical Control
Introduction to Symposium on Characterization of Hydraulic Cements
Quantitative Clinker Microscopy with the Light Microscope
Quantitative Phase Analysis of Clinker Using X-Ray Diffraction
Results of an Interlaboratory Concrete Testing Program: Part I
Corrosion of Reinforcing Steel in Concrete Containing Slag or Pozzolans
Synergistic Roles of Slag and Silica Fume in Very High-Strength Concrete
Characterization of Ground Granulated Blast-Furnace Slags and Fly Ashes and Their Hydration in Portland Cement Blends
Practical Considerations Pertaining to the Microscopical Determination of Air Void Characteristics of Hardened Concrete (ASTM C 457 Standard)
A Method for Proportioning High-Strength Concrete Mixtures
Laboratory Evaluation of Wet and Dry Abrasion Resistance of Cement Mortar
Determination of Concrete Strength by Nondestructive Methods
High-Strength and Flowing Concrete with a Zeolitic Mineral Admixture
Principles Underlying Production of High-Performance Concrete
The Effect of Mix Design on the Properties of Sulfur Concrete
Mechanical Properties, Abrasion Resistance, and Chloride Permeability of Concrete Incorporating Granulated Blast-Furnace Slag
Testing and Evaluation of a Novel Melamine-Based Superplasticizer in Concrete
Effects on Flexural Performance of Sawing Plain Concrete and of Sawing and Other Methods of Altering the Degree of Fiber Alignment in Fiber-Reinforced Concrete
Behavior of Cement-Reduced and “Flowing” Fresh Concretes Containing Conventional Water-Reducing and “Second-Generation” High-Range Water-Reducing Admixtures
Evaluation of Test Methods for Measuring the Bond Strength of Portland Cement Based Repair Materials to Concrete
On Testing of Very Short Concrete Specimens
Durability of Concrete under Simulated Arctic Conditions
Another Look at the Portland Cement/Chemical Admixture Incompatibility Problem
Freeze-Thaw Testing of Coarse Aggregate in Concrete: Procedures Used by Michigan Department of Transportation and Other Agencies
Some Recent Problems with Air-Entrained Concrete
Na²SO⁴ Soundness Test Evaluation
Statistical Characteristics of New Pin Penetration Test
Effect of Different Admixtures on the Strength of Sulphur Concrete
Basic Creep Formula for Aging Concrete: Sinh-Double Power Law
A Damage Model for Sulfate Attack of Cement Mortars
Modification of the X-Radiography Technique to Include a Contrast Agent for Identifying and Studying Microcracking in Concrete
Abrasion Resistance of Surface-Treated Concrete
Analytical Investigation of the Influence of Air Bubble Size on the Determination of the Air Content of Freshly Mixed Concrete
Effect of Air-Entraining Agent on Air-Void Parameters of Low- and High-Calcium Fly Ash Concretes
Test Methods for Rapid-Hardening Magnesium Phosphate-Based Cements
Limestone Additions to Portland Cement—An Old Controversy Revisited
Use of Ultrasonic Pulse Velocity for Fracture Testing of Cemented Materials
New Approach for a Concrete Scaling Test Based on Field Conditions
Creep of Lightweight Aggregate Concrete Under Variable Stresses
Experimental Studies of Elastic Wave Propagation in High-Strength Mortar
Production and Evaluation of a New Source of Granulated Blast Furnace Slag
Concrete Incorporating High Volumes of ASTM Class F Fly Ash
Freeze-Thaw Durability of Wet-Mix and Dry-Mix Shotcretes with Silica Fume and Steel Fibres
Mechanical Properties and Workability of Superplasticized Concrete
Finite-Element Analysis of the Pullout Test Using a Nonlinear Discrete Cracking Approach
The Inhibition of Chloride-Induced Corrosion in Reinforced Concrete by Calcium Nitrite
Factors Affecting the Reactivity of Fly Ash from Western Coals
Effect of Chemical Admixtures on Portland Cement Hydration
Comparison of Slump Cone and V-B Tests as Measures of Workability for Fiber-Reinforced and Plain Concrete
High-Strength Semi-Lightweight Concrete with Up to 50% Fly Ash by Weight of Cement
Significance of Interrupted Testing on the Freeze-Thaw Resistance of Fly Ash Concrete by ASTM C 666 (Method A)
KC⁸A³: X-Ray Diffraction Characterization of the Compound and Comparison with NC⁸A³ and C³A
Statistics of Shrinkage Test Data
The Rate of Absorption of Aggregates
Comparative Study of the Microstructures of Normal and Very High-Strength Concretes
Mechanical Properties and Freezing and Thawing Resistance of High-Strength Concrete Incorporating Silica Fume
An Experiment to Investigate Chloride Intrusion on Construction Joints in Concrete
Cost-Effective Control of Concrete Quality Using Small Specimens of Mortar Extracted from Concrete
Shrinkage and Creep of Concrete Containing 50% Lignite Fly Ash at High Temperatures
Evaluation of the Potential for Expansion and Cracking of Concrete Caused by the Alkali-Carbonate Reaction
Fracture of Concrete Subjected to Impact Loading
Properties of High-Strength Concrete
A New Statistical Method for Prediction of Concrete Strength from In-Place Tests
Variations in the Chemical Composition, Specific Surface Area, Fineness, and Pozzolanic Activity of a Condensed Silica Fume
The Application of Neutron Radiography to the Study of Microcracking in Concrete
Some Laboratory Experiments on the Inhibitor Effect of Sodium Nitrite on Reinforcement Corrosion
Determining the Static and Dynamic Properties of Hardened Normal Weight and Heavy Weight Concrete
Water Soluble Polymers: The Relationship Between Structure, Dispersing Action, and Rate of Cement Hydration
Freeze-Thaw Durability of Concrete With and Without Silica Fume in ASTM C 666 (Procedure A) Test Method: Internal Cracking Versus Scaling
Effect of Cement Replacement, Content, and Type on the Durability Performance of Fly Ash Concrete in the Middle East
Chloride Concentrations in Concrete Pore Solutions Resulting from Calcium and Sodium Chloride Admixtures
Influence of Air Temperature on the Setting of Concrete Containing Set Retarding Admixtures
Fatigue Behavior of Superplasticized Concrete
Neoprene Pads for Capping Concrete Cylinders
Trade-Off of Gradation and Cost Requirements in Aggregate Blending
Application of CCRL Data in the Formulation of Precision Estimates for Selected Cement Standards
Cementitious Properties of Nonferrous Slags from Canadian Sources
Diagnostic Monitoring of the Physio-Chemical Processes in Hydrating Cement Paste
Mechanism of Pozzolanic Reactions and Control of Alkali-Aggregate Expansion
Effect of Rheological Properties of Cement Pastes on Workability of Mortars
Assessing Fire Damage of Concrete by the Ultrasonic Pulse Technique
Nondestructive Combined Methods Applied to Structural Concrete Members
Chloride Permeability Versus Air Content of Latex Modified Concrete
Recycled Concrete—A Source for New Aggregate
Trinity Square: Commentary on Concrete Test Data
The Variability of Condensed Silica Fume from a Canadian Source and Its Influence on the Properties of Portland Cement Concrete
Resistance to Freezing and Thawing of Silica Fume Concrete
Factors Affecting the Durability of Concrete and the Benefits of Using Blast-Furnace Slag Cement
Soundness Testing and Durability of Coarse Aggregates in Concrete
Effect of Fineness on Properties of Classified Cements
Studies of the Hydraulic Properties of Belite Middling Slime
Optimizing the Amount of Class C Fly Ash in Concrete Mixtures
The Uniformity and Influence of Silica Fume from a U.S. Source on the Properties of Portland Cement Concrete
Experimental Examination of Fly Ash Concrete
A Rockwell Hardness Test for Concrete
The Maturity Method: Theory and Application
Measures of the Workability of Steel Fiber Reinforced Concrete and Their Precision
Influence of Petrography of Argillaceous Carbonates on Their Frost Resistance in Concrete
On In-Place Strength of Concrete and Pullout Tests
The Incorporation of Low Levels of By-Products in Portland Cement and the Effects on Cement Quality
The Potential Use of Catalysts in the Cement Industry
Waste Fuels Program at the Mississauga Plant of St. Lawrence Cement, Inc.
The Use of Unconventional Fuels in Cement Manufacture
The Grace Factor: A New Tool for Cement Industry Process Control Engineers
Mechanical Properties, Durability, and Drying Shrinkage of Portland Cement Concrete Incorporating Silica Fume
Performance of Blast-Furnace Slag Cement
Study of Alkali-Silica Reactivity Tests to Improve Correlation and Predictability for Aggregates
Microcracking and Definition of Failure of High- and Normal-Strength Concretes
Quantitative X-Ray Diffraction Analysis of Cement and Clinker: A Bibliography
Lithological Characteristics of Concrete Aggregates as Related to Durability
Some Opportunities to Offset Poor Quality Characteristics of High-Alkali Cement
Some Questions Concerning ASTM Standards and Methods of Testing Fly Ash for Use with Portland Cement
Variation of Laboratory Concrete Flexural Strength Tests
Chemical Analysis of Portland Cement by Energy Dispersive X-Ray Fluorescence
A Method for Analyzing Void Distribution in Air-Entrained Concrete
Alkali Reactivity of Strained Quartz as a Constituent of Concrete Aggregate
Production Technology of Expanded Clay Aggregate Gravel with Bulk Density Below 300 kg/m³
Effects of Initial Field Curing on Standard 28-Day Cylinder Strengths
Efficient Large Panel Roofing
Chloride Penetration and the Deterioration of Concrete Bridge Decks
Evaluation of Selected Procedures for the Rapid Analysis of Fresh Concrete
On the Correlation of Consistency and Strength of Concrete to the Attrition Rate of Fine Aggregate
On the Correlation of Strength and Elasticity of Concrete to Los Angeles Abrasion Loss and Crushing Value of Indonesian River Gravels
Effect of Different Types of Crushers on Shape and Roughness of Aggregates
A Strain Control System for Relaxation Studies of Concrete
Mechanical Properties and Freezing and Thawing Resistance of Non-Air-Entrained, Air-Entrained, and Air-Entrained Superplasticized Concrete Using ASTM Test C 666, Procedures A and B
Ideal and Quasi-Ideal Grading of Coarse and Fine Aggregates for Mass Concrete
Accurate Rapid Analysis of Alkali Contents in Portland Cement
Development and Interaction of a Concrete Additive for Improved Performance and Durability
Definition and Measurement of Flexural Toughness Parameters for Fiber Reinforced Concrete
Precision of Flexural Strength and Toughness Parameters for Steel Fiber Reinforced Concrete
A Critical Look at ASTM C 618 and C 311
Development of a Conductivity Probe to Monitor Setting Time and Moisture Movement in Concrete
Development of High-Strength Concrete Incorporating a Large Percentage of Fly Ash and Superplasticizers
Variability and Control of Class C Fly Ash
Durability Performance of Polymer-Modified Mortars
Thermally Destructive Particles in Sound Dolostone Aggregate from an Ontario Quarry
Relative Resistance of Rained-On Concrete Pavements to Abrasion, Skidding, and Scaling
An Experimental Technique for Obtaining Complete Stress-Strain Curves for High Strength Concrete
Investigation of ASTM Paste and Mortar Bleeding Tests
Proportioning of Coarse Aggregate for Conventionally and Gap-Graded Concrete
The Action and Application of Two New ASTM Specifications for Shrinkage-Compensating Cement in Concrete: ASTM C 845 and C 878
Evaluation for Durability and Strength Development of a Ground Granulated Blast Furnace Slag
Condition of Concrete in Martin Dam After 50 Years of Service
Influence of Pozzolanic, Slag, and Chemical Admixtures on Pore Size Distribution and Permeability of Hardened Cement Pastes
State of Solutes in Contact with Hydrating Tricalcium Silicate Pastes
The Effect of Fly Ash on Concrete Alkali-Aggregate Reaction
Attack of Aggressive Fluids
Production of Artificial Porous Aggregates from Fuel-Containing Industrial Wastes in the USSR
Inertial Effects in the Instrumented Impact Testing of Cementitious Composites
Flexural Fatigue of Polymer Concrete
Use of the Maleic Acid Method for the Determination of Cement Content of Concrete
Abrasion-Erosion Resistance of Fiber-Reinforced Concrete
A Possible Method for Identifying Fly Ashes That Will Improve the Sulfate Resistance of Concretes
Effect of Mixing Temperature on Slump Loss and Setting Time of Concrete Containing High-Range Water Reducers
An Analytical Approach to Gap-Graded Concrete
High-Strength Concrete: An Annotated Bibliography 1930–1979
Air Content of Hardened Concrete from Comparison Electron Microscope Photographs
Roughness of Aggregates of Different Types by the Modified Fourier Method and Scanning Electron Microscopy
Formula for Calculating Spacing Factor for Entrained Air Voids
Concrete Polymer Materials as Alternative Construction Materials for Geothermal Applications—Field Evaluations
Pigments for Integrally Colored Concrete
Quick Determination of Cement Properties Through the Use of Hot-Pressing
Rapid Determination of the Predominant Form of Calcium Sulfate Found in Portland Cement and Its Effect on Premature Stiffening
A Method for the Determination of Consistency and Consistency Retention (Board Life) of Masonry Mortars
Alkali-Silica Reactivity: Some Reconsiderations
Influence of Water-Reducing Admixtures on Properties of Cement Paste—A Miniature Slump Test
Aspects of Sulfate Attack on Concrete
The Ring Method of Measuring Restrained Shrinkage in Mortar and Concrete
Scanning Electron Microscope Characterization of the Surfaces of ASTM C 109 Standard Ottawa Sand Grains
Low-Void Concrete Mixtures
Methods and Equipment Used in Preparing and Examining Fluorescent Ultrathin Sections of Portland Cement Concrete
The Precision of the Microscopical Determination of the Air-Void System in Hardened Concrete
Use of Superplasticizers as Water Reducers
The Electrical Resistivity of Concrete with Emphasis on the Use of Electrical Resistance for Measuring Moisture Content
Effect of Length/Diameter Ratio on Compressive Strength of Drilled Concrete Core—A Semi-Rational Approach
The Analysis of Interlaboratory Test Data
Ruggedness Evaluation of Test Procedures
Establishing Specification Limits for Materials
Precision Statements Without an Interlaboratory Test Program