Construction

    Seismic Performance of Stick-Built Four-Side Structural Sealant Glazing Systems and Comparison With Two-Side Structural Sealant Glazing and Dry-Glazed Systems

    Uniformity, Repeatability, and Permanent Deformation Resistance of Slabs Produced with the Linear Asphalt Compactor

    Precision Statements for the Surface Resistivity of Water Cured Concrete Cylinders in the Laboratory

    Assessment of Thixotropy of Fresh Mortars by Triaxial and Unconfined Compression Testing

    A Comparative Study of the Mechanical Behavior of Normal-Strength and High-Strength Concrete

    Variability Analysis of the Bulk Resistivity Measured Using Concrete Cylinders

    Relating Compressive Strength to Heat Release in Mortars

    Diagnosis of Concrete Quality by Structural Analysis

    Neutral Axis of Full-size Lumber With Multiple Knots

    Effect of Calculation Methods on Cement Paste and Mortar Apparent Activation Energy

    Effect of Fly Ash on Optimum Sulfate Levels Measured Using Heat and Strength at Early Ages

    Refining Conditions of Fatigue Testing of Hot Mix Asphalt

    An Experimental Study on Bond Strength of Reinforcing Steel in High-Volume Fly-Ash Concrete

    Development of a Reference Material for the Calibration of Cement Paste Rheometers

    Use of Portland Cement and Polymer Fibers to Stabilize Very High Moisture Content Fine-Grained Soils

    Large-Scale Direct Shear Testing of Recycled Construction and Demolition Materials

    Influence of Test Machine Control Method on Apparent Performance of ASTM C1550 Fiber Reinforced Concrete Panels

    Effect of UV and UV–Ozone Treatment of Polyolefin Fibers on Toughness of Fiber Concrete Composite

    Laboratory Evaluation of Recycled Concrete Aggregate and Recycled Clay Masonry Blends in Pavement Applications

    Influence of Reinforcement Characteristics on Non-Linear Performance Evaluation of Confined Beam-Column Joints Under Cyclic Loading

    Development of a 1200-mm-Diameter Round Panel Test for Post-Crack Assessment of Fiber-Reinforced Concrete

    Influence of Exposure Conditions on the Efficiency of Internal Curing in Concrete

    Workability and Setting Time of Alkali Activated Blast Furnace Slag Paste

    Applicability of the Accelerated Mortar Bar Test for Alkali-Silica Reactivity of Recycled Concrete Aggregates

    Mechanical Property Performance of Polymer-Modified Calcium Sulfoaluminate Cement Mortar Systems

    Effect of Fly Ash on Cement Admixture for a Low Plasticity Marine Soil

    Effects of Curing and Test Conditions on the Salt Scaling Durability of Fly Ash Concrete

    Using Linear Viscoelastic Modeling to Evaluate the Low Temperature Properties of Asphalt Mixtures Prepared With Aggregates of Different Sizes

    Influence of Fiber-Reinforced Polymers on Pile–Soil Interface Strength in Clays

    Properties of Concrete With Crumb Rubber Replacing Fine Aggregates (Sand)

    Crack Propagation Fracture Toughness of Several Wood Species

    Preliminary Characterization of Physical Properties of Cross-Laminated-Timber (CLT) Panels for Hygrothermal Modelling

    Influence of Laboratory Mixing Procedures on Volumetric and Mechanical Properties of RAP Mixtures

    Effect of Fly Ash on the Shear Strength of Concrete Beams Without Shear Reinforcement

    Evaluating Recycled Concrete Aggregate as Hot Mix Asphalt Aggregate

    Material Characterization Studies on Low- and High-Carbon Rice Husk Ash and Their Performance in Portland Cement Mixtures

    New Approach for Selecting Crumb-Rubber-Modified Asphalts for Rutting and Permanent Deformation Resistance

    Modeling Nanoindentation Creep Behavior of Asphalt Binder

    Comparison of Laboratory and Field Aging Properties of Different Asphalt Binders

    Mechanical Properties of Autoclaved Aerated Concrete with Different Densities

    The Use of Numerical Extrapolation to Accelerate Delayed Ettringite Formation Tests

    Influence of Aggregate Source and Warm-Mix Technologies on the Mechanical Properties of Asphalt Mixtures

    Limiting Early-Age Cracking in Concrete Bridge Decks

    Investigating a Natural Plant-Based Bio Binder and Cement Dust Mix as a Bitumen Substitute in Flexible Pavements

    Effect of Supplementary Cementitious Materials on Rheology of Oil Well Cement Slurries

    Influence of Compaction Energies on the Strength Characteristics of Lime-Treated Oil-Contaminated Lateritic Soil

    Strength Characteristics of Lime Treated Oil Contaminated Lateritic Soil

    The Effect of Chemical Composition of Aggregate on the Performance of Hot and Warm Mix Asphalt in Presence of Water

    Viscoelastic–Viscoplastic Characterization of Unbound Granular Material

    Evaluation of Flexible Pavement Mixtures Using Conventional Tests and Ultrasonic Wave Propagation

    A Method to Estimate Carbon Dioxide Sequestration in Concrete Pavement Interiors

    Dewatering and Stabilizing Fine-Grained Soils with Very High Moisture Content

    Quantitative X-Ray Powder Diffraction Analysis of Portland Cements: Proficiency Testing for Laboratory Assessment

    Measuring Freeze and Thaw Damage in Mortars Containing Deicing Salt Using a Low-Temperature Longitudinal Guarded Comparative Calorimeter and Acoustic Emission

    Influence of Friction in Supporting Rollers on the Apparent Flexural Performance of Third-Point Loaded Fiber Reinforced Concrete Beams

    Influence of Warm Mix Additive on Mechanistic, Economical, and Environmental Attributes of a Polymer-Modified Asphalt Mixture

    Monitoring Setting of Geopolymers

    Determining Coefficients of Thermal Contraction and Expansion of Asphalt Concrete Using Horizontal Asphalt Strain Gage

    Finite Element Model of Pavement Response Under Load Considering Cross-Anisotropy in Unbound Layers

    Investigating Applicability of Complex Modulus and Creep Compliance Interconversion in Asphalt Concrete

    Conductive Concrete for Electromagnetic Shielding Applications

    Torsional Shear Strength and Size Effect in Laminated Veneer Lumber

    The Role of Concrete Industry Standards as Institutional Barriers to More Sustainable Concrete Bridge Infrastructure

    Using a Centrifuge to Determine Moisture Properties of Lightweight Fine Aggregate for Use in Internal Curing

    Sorptivity Ratio and Compressive Strength of Alkali-Activated Blast Furnace Slag Paste

    Strain Gradients in Concrete Affected by Alkali–Silica Reaction: A Laboratory Simulation

    Structural Behavior of Novel Steel-Fiber Materials in Concrete Pipes (ASTM C1765)

    Evaluation of Reclaimed Asphalt Pavement Materials from Ultra-Thin Bonded Bituminous Surface

    Effects of Reclaimed Asphalt Pavement on Hot-mix Asphalt

    Comparative Analysis of the Influence of Sodium and Potassium Silicate Solutions on the Kinetics and Products of Slag Activation

    Flexural Characteristic of Rubberized Hybrid Concrete Reinforced With Steel and Synthetic Fibers

    Performance Criteria for Chemical Analysis of Hydraulic Cements by X-Ray Fluorescence Analysis

    Effect of Formwork, Wall Thickness, and Addition of Fly Ash on Concrete Hydration

    Using Fick's Second Law and Nernst–Planck Approach in Prediction of Chloride Ingress in Concrete Materials

    Reinforcement Efficiency of Modified Carbon Nanofiber in High-Performance Concrete Nanocomposite

    Effects of the Characteristics of High Range Water Reducing Agents and the Water to Powder Ratio on Rheological and Setting Behavior of Self-Consolidating Concrete

    Impact of Viscosity on Hydration Kinetics and Setting Properties of Cementitious Materials

    Model and Test Methods for Stability of Fresh Cement Paste

    Development of Self-compacting Concrete with Good Shape Stability for Slipform Construction

    Rheological Evaluation of Slump Flow Curves of Self-Consolidating Concrete From Instrumented Spread Table

    An Empirical Approach to Design Optimized Self-Compacting Concrete Mixes

    Measuring Cement Paste Rheology Using a Modified Dynamic Shear Rheometer: An Approach to Detect Cement-Admixtures Incompatibilities

    Mechanisms of Degradation in Rheological Properties Due to Pumping and Mixing

    Effects of Nanomaterials on the Hydration Kinetics and Rheology of Portland Cement Pastes

    Compression Testing of Ultra-High-Performance Concrete

    Tensile Mechanical Response of Ultra-High-Performance Concrete

    Gaps in Material Specifications—A Manufacturer’s Perspective

    Ultra-High Performance Concrete History and Usage by the Corps of Engineers

    Gaps in Material Specifications—A Manufacturer's Perspective

    The Challenges Related to Interface Bond Characterization of Ultra-High-Performance Concrete With Implications for Bridge Rehabilitation Practices