|
|
|
SEDL / STP / STP981-EB
 |
STP981
Adhesively Bonded Joints: Testing, Analysis, and Design
Johnson WS
Pages: 313
Published: 1988
|
|
Twenty-one papers present the latest advances in the understanding of mechanical behavior of adhesives. Their focus is on aircraft and naval applications. The mechanical testing section discusses techniques and specimen designs for determining tensile, shear, and mixed-mode properties of adhesives. Papers on stress analysis consider both analytical and experimental methods to analyze the stress in an adhesively bonded joint. In the section on failure mechanisms examples are presented for several types of adherents and specimen geometries. The final section considers design and durability of bonded joints.
Table of Contents
Introduction
Johnson W.
Summary
Johnson W.
Effect of Removing Eccentricity from Button Tensile Adhesion Tests
Anderson G., Chandapeta S., DeVries K.
An Examination of Mixed-Mode Debonding in the Blister Test
Hanson E., Liechti K.
A Uniform Pure Shear Testing Specimen for Adhesive Characterization
Arcan M., Weissberg V.
Mechanical Behavior Assessment of Epoxy Adhesive in the Double-Lap Joint
Gilibert Y., Klein M., Rigolot A.
Determination and Verification of Elastic Parameters for Adhesives
Gradin P., Jangblad D., Stenström T.
Chevron-Notched Specimens for Measuring Adhesive Fracture Toughness
Spingarn J.
Development of Alternative Techniques for Measuring the Fracture Toughness of Rubber-to-Metal Bonds in Harsh Environments
Brinson H., Dillard D., Lefebvre D., Liechti K., Lin C., Thornton J.
A Test Specimen with Constant Stress Intensity Factor
Groth H.
Deformations and Strains in a Thick Adherend Lap Joint
Czarnek R., Joh D., Post D., Wood J.
Factors Influencing Elastic Stresses in Double Cantilever Beam Specimens
Crews J., Raju I., Shivakumar K.
Special Mixed Finite Elements for Interfacial Stress Analysis of Adhesively Bonded Joints
Aivazzadeh S., Bichara M., Ghazal A., Verchery G.
Determination of Stress Distribution in Double-Lap Joints, Matched Asymptotic Expansions and Conformal Mapping
Gilibert Y., Rigolot A.
A Comparison of Pure Mode I and Mixed Mode I–III Cracking of an Adhesive Containing an Open Knit Cloth Carrier
Crosley P., Johnson W., Ripling E.
Application of Fracture Mechanics and Acoustic Emission to the Characterization of Adhesively Bonded Joints Tested in Mode I Opening
Coddet C., Ziane E.
Debonding Characteristics of Adhesively Bonded Woven Kevlar Composites
Johnson W., Mall S.
Effect of Adhesive Debond on Stress-Intensity Factors in Bonded Composite Panels
Bigelow C.
Static Strength of Bolted and Adhesively Bonded Joints for Steel Structures
Albrecht P., Sahli A.
Understanding Effects of Adhesive Ductility and Bondline Geometry on Tube-and-Socket Joint Performance
Hammill J., Luyk K., Miller J.
Stress Analysis Concepts for Adhesive Bonding of Aircraft Primary Structure
Krieger R.
Environmental Effects on Fracture of Adhesively Bonded Joints
Jurf R.
Environmental Durability of Adhesively Bonded Joints
Brown S., Pitrone L.
Author Index
Subject Index
Committee: D14
Paper ID: STP981-EB
DOI: 10.1520/STP981-EB
ISBN-EB: 978-0-8031-5051-5
 ASTM International is a member of CrossRef.
0-8031-0993-8
978-0-8031-0993-3
STP981-EB
|
