|
|
|
SEDL / STP / STP893-EB
 |
STP893
Composite Materials: Testing and Design (Seventh Conference)
Whitney JM
Pages: 454
Published: 1986
Other books in this series
|
|
Emphasizes toughness as related to damage tolerance of advanced composites. Discusses the problems researchers face in characterizing and analyzing the complex failure mechanisms associated with stress concentration and delaminations. Contains several papers on multi-dimensionally reinforced materials in the form of woven and braided structure.
Table of Contents
Introduction
Whitney J.
Summary
Whitney J.
Effect of Manufacturing Defects and Service-Induced Damage on the Strength of Aircraft Composite Structures
Garrett R.
Bolted Composite Repairs Subjected to Biaxial or Shear Loads
Bohlmann R., Renieri G., Riley B.
Characterization of T300/V-378A Graphite/Bismaleimide for Structural Applications
Ramkumar R., Grimes G., Kong S.
Development of Test and Analysis Methods for Thick-Wall, Graphite/Epoxy Filament-Wound Composite Materials Fracture Toughness
Riddle R., Beckwith S.
Modified Mircodebonding Test for Direct In Situ Fiber/Matrix Bond Strength Determination in Fiber Composites
Mandell J., Grande D., Tsiang T., McGarry F.
Effect of Stress Biaxiality on the Transverse Tensile Strain-to-Failure of Composites
Nicholls D.
Compression Failure Mechanisms in Unidirectional Composites
Hahn H., Williams J.
Fractographic and Microstructural Examination of Compression Failures in Wet Compression Graphite/Epoxy Coupons
Kar R., Herfert R., Kessler R.
Notch Sensitivity and Stacking Sequence of Laminated Composites
Lagace P.
Effect of Laminate Thickness and Specimen Configuration on the Fracture of Laminated Composites
Harris C., Morris D.
Effect of Impact and Fatigue Loads on the Strength of Graphite/Epoxy Composites
Avva V., Vala J., Jeyaseelan M.
Bond Thickness Effect in Adhesive Joints and Its Significance for Mode I Interlaminar Fracture of Composites
Chai H.
Design Analysis and Testing for Mixed-Mode and Mode II Interlaminar Fracture of Composites
Armanios E., Rehfield L., Reddy A.
Delamination Resistant Composite Concepts
Browning C., Schwartz H.
Improvement of Edge Delamination Strength of Composite Laminates Using Adhesive Layers
Chan W., Rogers C., Aker S.
Delamination of Composite Laminates Stimulated by Interlaminar Shear
Soni S., Kim R.
Analysis of Delamination Propagation in the Composite Layer of Metal-to-Composite Stepped-Lap Joints
Ratwani M., Kan H.
Characterization of Mode I and Mixed-Mode Failure of Adhesive Bonds Between Composite Adherends
Mall S., Johnson W.
Monitoring Damage Progression in Center-Notched Boron/Aluminum Laminates Through Acoustic Emission
Madhukar M., Awerbuch J.
Dynamic Stress Analysis of Smooth and Notched Fiber Composite Flexural Specimens
Murthy P., Chamis C.
Tensile Strength and Modulus of a Three-Dimensional Braid Composite
Ko F.
Elastic Stiffness of Three-Dimensional Braided Textile Structural Composites
Ma C., Yang J., Chou T.
Fabrication and Mechanical Properties of Multidimensionally (X-D) Braided Composite Materials
Macander A., Crane R., Camponeschi E.
Author Index
Subject Index
Committee: D30
Paper ID: STP893-EB
DOI: 10.1520/STP893-EB
ISBN-EB: 978-0-8031-4963-2
 ASTM International is a member of CrossRef.
0-8031-0447-2
978-0-8031-0447-1
STP893-EB
STP 893
|
