|
|
|
SEDL / STP / STP888-EB
 |
STP888
The Use of Small-Scale Specimens for Testing Irradiated Material
Corwin WR, Lucas GE
Pages: 385
Published: 1986
|
|
Twenty-two papers appear in this volume. The papers are divided into two areas: • strength and ductility • fatigue and fracture
Table of Contents
Introduction
Corwin W., Lucas G.
General Discussion: Miniaturized Disk Bend Test
Discussion
Discussion
Discussion
Summary
Corwin W., Lucas G.
Use of the Disk Bend Test to Assess Irradiation Performance of Structural Alloys
Hamilton M., Huang F.
Miniaturized Disk Bend Test Technique Development and Application
Argon A., Browning A., Harling O., Manahan M.
The MIT Miniaturized Disk Bend Test
Harling O., Kohse G., Lau C., Lee M., Sohn D.
Disk-Bend Ductility Tests for Irradiated Materials
Braski D., Klueh R.
Development of Small Punch Tests for Ductile-Brittle Transition Temperature Measurement of Temper Embrittled Ni-Cr Steels
Baik J., Buck O., Kameda J.
Shear Punch and Microhardness Tests for Strength and Ductility Measurements
Lucas G., Odette G., Sheckherd J.
Low-Load Microhardness Changes in 14-MeV Neutron Irradiated Copper Alloys
Kulcinski G., Zinkle S.
Effects of Specimen Thickness and Grain Size on the Mechanical Properties of Types 304 and 316 Austenitic Stainless Steel
Asada S., Igata N., Miyahara K., Uda T.
Failure Strain for Irradiated Zircaloy Based on Subsized Specimen Testing and Analysis
Adamson R., Rand R., Tucker R., Wisner S.
Wire Tensile Testing for Radiation-Hardening Experiments
Bradley E., Jones R.
Design and Use of Nonstandard Tensile Specimens for Irradiated Materials Testing
Atkin S., Chin B., Panayotou N., Puigh R.
Comparison of Mechanical Properties in Thin Specimens of Stainless Steel with Bulk Material Behavior
Fenici P., Jung P., Piatti G., Rickerby D., Schiller P.
A Miniaturized Mechanical Testing System for Small-Scale Specimen Testing
Hannula S., Li C., Wanagel J.
Post-Irradiation Creep Properties of Cold-Worked 316 Stainless Steel As Measured with Small Creep Specimens
Snykers M., Van Asbroeck P., Vandermeulen W.
Miniature Center-Cracked-Tension Specimen for Fatigue Crack Growth Testing
Ermi A., James L.
Use of Subsize Fatigue Specimens for Reactor Irradiation Testing
Grossbeck M., Liu K.
Use of Subsized Specimens for Evaluating the Fracture Toughness of Irradiated Materials
Huang F.
Subsized Bend and Charpy V-Notch Specimens for Irradiated Testing
Lucas G., McConnell P., Odette G., Perrin J., Sheckherd J.
Effect of Specimen Size and Material Condition on the Charpy Impact Properties of 9Cr-1Mo-V-Nb Steel
Corwin W., Hougland A.
Specimen-Size Considerations in Crack-Arrest Testing of Irradiated RPV Steels
Landow M., Marschall C., Rosenfield A.
Experience in Subsized Specimen Testing
McConnell P., Perrin J., Sheckherd J., Wullaert R.
Author Index
Subject Index
Committee: E10
Paper ID: STP888-EB
DOI: 10.1520/STP888-EB
ISBN-EB: 978-0-8031-4960-1
 ASTM International is a member of CrossRef.
0-8031-0440-5
978-0-8031-0440-2
STP888-EB
|
