STP868

    Fracture Mechanics: Sixteenth Symposium

    Kanninen MF, Hopper AT
    Published: 1985


      Format Pages Price  
    PDF (9.3M) $79   ADD TO CART
    Hardcopy (shipping and handling) $79   ADD TO CART
    Hardcopy + PDF Bundle - Save 25%
    (shipping and handling)
    $118.50   ADD TO CART


    Fifth-six peer-reviewed papers discuss: elastoplastic analysis; linear elastic analysis; temperature and environmental effects; elastoplastic experiments; fatigue crack growth; applications; dynamic fracture mechanics; and basic considerations.


    Table of Contents

    Introduction
    Hopper A., Kanninen M.

    Summary
    Hopper A., Kanninen M.

    Stress Intensity Factors for a System of Cracks in an Infinite Strip
    Civelek M.

    Wide-Range Displacement Expressions for Standard Fracture Mechanics Specimens
    Gross B., Kapp J., Leger G.

    Evaluation of Analytical Solutions for Corner Cracks at Holes
    Heckel J., Rudd J.

    Stress Distribution at the Tip of Cracks Originating from a Circular Hole under Biaxial Loads
    Oladimeji M.

    Wide-Range Weight Functions for the Strip with a Single Edge Crack
    Orange T.

    Analysis of an Externally Radially Cracked Ring Segment Subject to Three-Point Radial Loading
    Gross B., Shannon J., Srawley J.

    The Dugdale Model for Compact Specimen
    Mall S., Newman J.

    Internal Hydrogen Degradation of Fatigue Thresholds in HSLA Steel
    Esaklul K., Gerberich W.

    Effect of Hydrogen on Crack Initiation and Growth in 18Mn-4Cr Steel
    Carpenter D., Kim Y., Mukherjee B.

    A Model for Creep/Fatigue Interactions in Alloy 718
    Ashbaugh N., Nicholas T., Weerasooriya T.

    Critical Load Assessment Method for Stable Crack Growth Analysis
    Rhee H.

    Analysis of Fracture Parameters for Bending-Type Specimens
    Aizawa T., Yagawa G.

    Three-Dimensional Elastic-Plastic Finite Element Analysis of Three-Point Bend Specimens
    Dodds R., Rolfe S., Wellman G.

    Fracture Toughness Improvement in a Carbon Steel Due to Normalization
    Macdonald B.

    Studies on Size Effects and Crack Growth of Side-Grooved CT Specimens
    Atluri S., Kikuchi M., Miyamoto H.

    J-R Curve Determination Using Precracked Charpy Specimens and the Load-Drop Method for Crack Growth Measurements
    Kapp J.

    Strain-Hardening Effects on Fracture Toughness and Ductile Crack Growth in Austenitic Stainless Steels
    Balladon P., Heritier J., Jarboui C.

    Axial Fracture Toughness Testing of Zr-2.5Nb Pressure Tube Material
    Davies P., Stearns C.

    Fracture Toughness Testing of Ductile Cast Irons
    Bradley W., Lutz T., Salzbrenner R., Van Den Avyle J.

    A Similitude Criterion for Fatigue Crack Growth Modeling
    Broek D.

    Characterization of Crack Closure
    Sehitoglu H.

    Effects of Load Gradient on Applicability of a Fatigue Crack Growth Rate-Cyclic J Relation
    Jolles M.

    Observations on a Fracture Mechanics Approach to Fatigue Crack Initiation in Ti-6Al-4V
    Cooley L., Crooker T., Yoder G.

    Strain-Rate Dependence of the Deformation at the Tip of a Stationary Crack
    Hahn G., Hoff R., Rubin C.

    Crack Tip Plasticity of a Tearing Crack
    Kobayashi A., Lee O.

    Dynamic Crack Propagation Through Welded HY-80 Plates under Blast Loading
    Ahmad J., Barnes C., Kanninen M.

    Crack Arrest Behavior of a High-Strength Aluminum Alloy
    Hoagland R., Lin C.

    In Situ SEM Observation of Fracture Processes in Short Glass Fiber Reinforced Thermoplastic Composite
    Kamigaito O., Kurauchi T., Sato N., Sato S.

    Some Three-Dimensional Aspects of Subcritical Flaw Growth as Measured in a Transparent Polymeric Material
    Epstein J., Smith C.

    Stress Intensity Factors for Surface Cracks with Arbitrary Shapes in Plates and Shells
    Miyoshi T., Shiratori M., Tanabe O.

    On the Three-Dimensional Implications of LEFM: Finite Element Analysis of Straight and Curved Through-Cracks in a Plate
    Solecki J., Swedlow J.

    Fracture Behavior of a Uranium or Tungsten Alloy Notched Component with Inertia Loading
    Scavullo M., Underwood J.

    Strain-Rate Effects on the Ductile/Brittle Transition in Steels
    Knorovsky G.

    Elastic-Plastic Failure Analysis of Pressure Vessel Tests
    Sciammarella C.

    Fracture Mechanics Analysis of a Pressure Vessel with a Semi-Elliptical Surface Crack Using Elastic-Plastic Finite Element Calculations
    Aurich D., Brocks W., Noack H., Veith H.

    Application of Maximum Load Toughness to Defect Assessment in a Ductile Pipeline Steel
    Garwood S., Willoughby A.

    Author Index

    Subject Index


    Committee: E08

    Paper ID: STP868-EB

    DOI: 10.1520/STP868-EB

    ISBN-EB: 978-0-8031-4933-5

    ISBN-13: 978-0-8031-0225-5

    ASTM International is a member of CrossRef.

    0-8031-0225-9
    978-0-8031-0225-5
    STP868-EB