|
|
|
SEDL / STP / STP864-EB
 |
STP864
Recent Advances in Composites in the United States and Japan
Vinson JR, Taya M
Pages: 712
Published: 1985
|
|
This publication, Recent Advances in Composites in the United States and Japan, contains papers presented at the United States/Japan Symposium on Composite Materials which was held in Hampton, Virginia, 6-8 June 1983. The symposium was sponsored by ASTM Committees D30 on High Modulus Fibers and Their Composites and E09 on Fatigue in cooperation with the National Aeronautic and Space Administration. Jack R. Vinson and Minoru Taya, University of Delaware, served as symposium chairman and secretary, respectively. Jack R. Vinson and Minoru Taya are editors of this publication.
Table of Contents
Introduction
Vinson J., Taya M.
Summary
Vinson J., Taya M.
Load Concentration Factors in a Chain-of-Bundles Probability Model
Fukuda H.
Effect of Graphite Fiber/Epoxy Matrix Adhesion on Composite Fracture Behavior
Drzal L., Rich M.
Fracture Behavior of SiC Matrix Composites Reinforced with Helical Tantalum Fiber
Kagawa Y., Nakata E., Yoshida S.
First-Ply Failure of Graphite/Epoxy Laminates
Kistner M., Whitney J., Browning C.
Damage Initiation at Curved Free Edges: Application to Uniaxially Loaded Plates Containing Holes and Notches
Klang E., Hyer M.
Fracture Toughness of Fiber-Polymer Cement Concrete System
Horiguchi T.
Knee Point and Post-Failure Behavior of Some Laminated Composites Subjected to Uniaxial Tension
Ohira H., Uda N.
Fatigue Behavior of Alumina Fiber Reinforced Aluminum Composites
Tsangarakis N., Slepetz J., Nunes J.
An Evaluation of the Effects of Stacking Sequence and Thickness on the Fatigue Life of Quasi-Isotropic Graphite/Epoxy Laminates
Harris C., Morris D.
Fatigue Response of Notched Graphite/Epoxy Laminates
Kress G., Stinchcomb W.
Profiles of Fatigue Damage in Graphite/Epoxy Composites from Ultrasonic Transmission Power Spectra
Cantrell J., Winfree W., Heyman J.
Residual Stresses In and Around a Short Fiber in Metal Matrix Composites Due To Temperature Change
Mura T., Taya M.
Finite-Element Analyses of Saint-Venant End Effects for Composite Materials
Okumura H., Watanabe K., Yamada Y.
Analysis of Behavior of Fibrous Composite Compression Specimens
Rehfield L., Armanios E., Changli Q.
Effect of End-Tab Design on Tension Specimen Stress Concentrations
Cunningham M., Schoultz S., Toth J.
Stress and Deformation of the Sandwich Panel Having Curved Faceplates Under Pressure Loading
Akasaka T., Asano K.
Dynamic Response of Flat Integrally Stiffened Graphite/Epoxy Panels Under Combined Acoustic and Shear Loads
Soovere J.
Stability of Nonlinear Circumferential Waves in an Accelerated Spinning Rectilinearly Orthotropic Disk
Ohnabe H., Funatogawa O., Itoh M.
Dispersive Wave Propagation in Random Particulate Composites
Kinra V.
Impact Resistance of Fiber Composites: Energy-Absorbing Mechanisms and Environmental Effects
Chamis C., Sinclair J.
Ferrite-Resin Composite Material for Vibration Damping
Yamauchi F., Emoto S.
Finite-Element Analysis of Interlaminar Shear Stress Due to Local Impact
Ross C., Malvern L., Sierakowski R., Takeda N.
Viscoelastic Buckling Analysis of Laminated Composite Columns
Wilson D., Vison J.
Design of Laminated Fibrous Composite Plates with Required Flexural Stiffness
Miki M.
Short Fiber Reinforced Magnetic Powder Cores
Morita M., Ochiai K., Kamohara H., Arima I., Aisaka T., Horie H.
Developmental Researches on the Lightweight Structure for Future Satellite in the National Development Agency of Japan
Kawashima T., Yamamoto M., Yamawaki T., Yoshimura Y.
Structure and Properties of an Integrated 3-D Fabric for Structural Composites
Ko F., Pastore C.
Manufacture of Carbon-Carbon Composites by Using Fine Coke and Its Properties
Cho T., Okura A.
Fabrication of Silicon Carbide Fiber-Reinforced Aluminum Composites
Kohara S., Muto N.
Fabrication and Spin Tests of Thick Laminated S2-Glass Flywheel Disks
Nimmer R., Torossian K., Hickey J.
Toward Process Optimization by Monitoring the Electrical Properties During the Cure Cycle for CFRP
Minoda Y., Sakatani Y., Yamaguchi Y., Niizeki M., Saigoku H.
Work of Fracture in Metal Matrix Composites
Daimaru A., Hata T., Taya M.
Liquid Crystal Film Visualization Approach to Fracture in Composites
Kobayashi A., Suemasu H.
On the Streamline Specimen for Tension Testing of Composite Materials
Oplinger D., Parker B., Gandhi K., Lamothe R., Foley G.
Design for Ultimate Strength with a Chopped Glass-Filled Phenolic Composite: Critical Flaw Sensitivity, Residual Stress, Fiber Orientation
Nimmer R., Trantina G.
Fiber-Matrix Reaction Zone Growth Kinetics in SiC-Reinforced Ti-6Al-4V as Studied by Transmission Electron Microscopy
Rhodes C., Spurling R.
Effects of Vacuum and Temperature on Mechanical Properties of S2-Glass/Epoxy
Thomas Hahn H., Hwang D., Chin W.
Effect of Coatings on Interfacial Reaction in Tungsten/Nickel and Tungsten/316L Composites
Umekawa S., Lee C., Yamamoto J., Wakashima K.
Assessing the Corrosion Resistance of Metal Matrix Composite Materials in Marine Environments
Aylor D., Kain R.
Elevated-Temperature Internal Friction in an Oxide Dispersion-Strengthened Nickel-Chromium Alloy
Shioiri J., Satoh K.
Elastic Representation Surfaces of Unidirectional Graphite/Epoxy Composites
Kriz R., Ledbetter H.
Shear Modulus of Epoxy Resin Under Compression
Hayashi T.
Thermal Expansion Coefficients of Misoriented Short-Fiber Reinforced Composites
Takao Y.
On High-Velocity Brittleness and Ductility of Dual-Phase Steel and Some Hybrid Fiber Reinforced Plastics
Kawata K., Hashimoto S., Takeda N., Sekino S.
Index
Committee: D30
Paper ID: STP864-EB
DOI: 10.1520/STP864-EB
ISBN-EB: 978-0-8031-4929-8
 ASTM International is a member of CrossRef.
0-8031-0436-7
978-0-8031-0436-5
STP864-EB
STP 864
|
