STP833

    Fracture Mechanics: Fifteenth Symposium

    Sanford RJ
    Published: 1984


      Format Pages Price  
    PDF (12M) $81   ADD TO CART
    Hardcopy (shipping and handling) $81   ADD TO CART
    Hardcopy + PDF Bundle - Save 25%
    (shipping and handling)
    $121.50   ADD TO CART


    Subjects covered fall into several categories: theoretical, numerical, and experimental aspects of the mechanics of fracture; high-cycle fatigue; material influences on fracture; and elasto-plastic fracture mechanics.


    Table of Contents

    Introduction The George R. Irwin Anniversary Volume
    Sanford R.

    Summary
    Sanford R.

    Transition of Part-Through Cracks at Holes into Through-the-Thickness Flaws
    Grandt A., Harter J., Heath B.

    Part-Through Flaw Stress Intensity Factors Developed by a Slice Synthesis Technique
    Saff C., Sanger K.

    Analysis and Growth of Cracks in Skins with Variable Thickness
    Kan H., Ratwani M.

    Mode I Stress Intensity Factors for Point-Loaded Cylindrical Test Specimens with One or Two Radial Cracks
    Andrasic C., Parker A.

    Stress and Fracture Analysis of Tapered Attachment Lugs
    Hsu T., Kathiresan K., Rudd J.

    An Elastic-Plastic Finite Element Analysis of Crack Initiation, Stable Crack Growth, and Instability
    Newman J.

    Stress Intensity Distributions and Width Correction Factors for Natural Cracks Approaching “Benchmark” Crack Depths
    Kirby G., Smith C.

    Dynamic Crack Branching—A Photoelastic Evaluation
    Kang B., Kobayashi A., Ramulu M.

    Recent Advances in Crack-Arrest Technology
    Markworth A., Marschall C., Mincer P., Rosenfield A.

    A Failure Assessment Approach for Handling Combined Thermomechanical Loading
    Bloom J., Malik S.

    Fatigue Life of Welded Stiffeners with Known Initial Cracks
    Albrecht P., Sahli A.

    Development of a Fatigue Crack Propagation Model of Incology 901
    Engsberg N., Schwartz B., Wilson D.

    Fatigue Crack Growth Behavior of 7XXX Aluminum Alloys under Simple Variable Amplitude Loading
    Bretz P., Bucci R., Malcolm R., Vasudévan A.

    Effects of Specimen Configuration and Frequency on Fatigue Crack Propagation in Nylon 66
    Hahn M., Hertzberg R., Lang R., Manson J.

    Fatigue Life Estimation of Notched Members
    Dowling N., Kurath P., Socie D.

    Effects of Constraint Variation on the Fatigue Growth of Surface Flaws
    Jolles M., Tortoriello V.

    Temperature Dependence of Fracture Toughness of Large Steam Turbine Forgings Produced by Advanced Steel Melting Processes
    Landes J., Swaminathan V.

    Fracture Toughness of Stainless Steel Weldments at Elevated Temperatures
    Garwood S.

    Application of High-Temperature Fracture Mechanics to the Prediction of Creep Crack Growth for a γ-γ′ Nickel-Base Superalloy
    Huang J., Pelloux R.

    Effect of Section Size on Transition Temperature Behavior of Structural Steels
    Landes J., McCabe D.

    Microstructural Aspects of the Fracture Toughness Cleavage-Fibrous Transition for Reactor-Grade Steel
    Armstrong R., Irwin G., Kobayashi T., Ogawa K., Zhang X.

    Influence of Inclusions on the Fracture Properties of A588A Steel
    Wilson A.

    Load History Effects on the Fracture Toughness of a Modified 4340 Steel
    Landes J., Leax T.

    Microcrack Initiation and Growth in a Pearlitic Steel—Experiments and Analysis
    Leis B.

    Fracture Toughness of High Strength Steel Predicted from Charpy Energy or Reduction in Area
    Leger G., Underwood J.

    Effect of Fast-Neutron Irradiation on Fracture Toughness of Alloy A-286
    Mills W.

    Wide Range Creep Crack Growth Rate Behavior of A470 Class 8 (Cr-Mo-V) Steel
    Ernst H., Saxena A., Shih T.

    J-Integral R-Curve Testing of High Strength Steels Utilizing the Direct-Current Potential Drop Method
    Hackett E., Vassilaros M.

    Single-Specimen J-Resistance Curve Evaluations Using the Direct-Current Electric Potential Method and a Computerized Data Acquisition System
    Prabhat K., Wambaugh J., Wilkowski G.

    Geometry and Size Effects on J-R and δ-R Curves under Plane Stress Conditions
    Hellmann D., Schwalbe K.

    Effect of Specimen Dimensions on Critical J-Value at the Onset of Crack Extension
    De Roo P., Marandet B., Phelippeau G., Rousselier G.

    Influence of Loading Rate on the Fracture Toughness of Some Structural Steels in the Transition Regime
    Marandet B., Phelippeau G., Sanz G.

    Crack Growth Resistance Measurement by Crack Opening Displacement Methods
    Ernst H., McCabe D.

    Post-Yield Crack Opening Displacement of Surface Cracks in Steel Weldments
    Cheng Y., King R., McHenry H., Read D.

    On the Use of Compliance for Determining Crack Length in the Inelastic Range
    Ashbaugh N., Nicholas T., Weerasooriya T.

    A Tearing Instability Analysis for Strain-Hardening Materials
    Kanninen M., Pan J., Popelar C.

    Application of a Tearing Instability Analysis for Strain-Hardening Materials to a Circumferentially Cracked Pipe in Bending
    Ahmad J., Kanninen M., Pan J., Popelar C.

    Index


    Committee: E08

    Paper ID: STP833-EB

    DOI: 10.1520/STP833-EB

    ISBN-EB: 978-0-8031-4900-7

    ISBN-13: 978-0-8031-0208-8

    ASTM International is a member of CrossRef.

    0-8031-0208-9
    978-0-8031-0208-8
    STP833-EB