|
|
|
SEDL / STP / STP803V2-EB
 |
STP803V2
Elastic-Plastic Fracture: Second Symposium, Volume II Fracture Resistance Curves and Engineering Applications
Shih CF, Gudas JP
Pages: 788
Published: 1983
Other books in this series
|
|
Two separate volumes comprise STP803. The papers in these two volumes have been grouped into six topic areas including elastic-plastic crack analysis, fully plastic crack and surface flaw analysis and correlation, engineering applications, test methods and geometry effects, and cyclic plasticity effects and material characterization.
Table of Contents
Introduction
Gudas J., Shih C.
A Method of Application of Elastic-Plastic Fracture Mechanics to Nuclear Vessel Analysis
Paris P., Johnson R.
Evaluation of the Elastic-Plastic Fracture Mechanics Methodology on the Basis of Large-Scale Specimens
Kussmaul K., Issler L.
Studies of Different Criteria for Crack Growth Instability in Ductile Materials
Kaiser S., Carlsson A.
Further Developments of a J-Based Design Curve and Its Relationship to Other Procedures
Turner C.
Application of Two Approximate Methods for Ductile Failure Assessment
Hodulak L., Blauet J.
Development of a Plastic Fracture Methodology for Nuclear Systems
Marston T., Jones R., Kanninen M., Mowbray D.
Some Salient Features of the Tearing Instability Theory
Ernst H.
Verification of Tearing Modulus Methodology for Application to Reactor Pressure Vessels with Low Upper-Shelf Fracture Toughness
Tang S., Riccardella P., Huet R.
Ductile Tearing Instability Analysis: A Comparison of Available Techniques
Chell G., Milne I.
Validation of a Deformation Plasticity Failure Assessment Diagram Approach to Flaw Evaluation
Bloom J.
Studies on the Failure Assessment Diagram Using the Estimation Method and J-Controlled Crack Growth Approach
Shih C., Kumar V., German M.
Lower-Bound Solutions and their Application to the Collapse Load of a Cracked Member Under Axial Force and Bending Moment
Okamura H., Kageyama K., Takahata Y.
Ductile Crack Growth Analysis Within the Ductile-Brittle Transition Regime: Predicting the Permissible Extent of Ductile Crack Growth
Milne I., Curry D.
Ductile Fracture of Circumferentially Cracked Pipes Subjected to Bending Loads
Zahoor A., Kanninen M.
Engineering Methods for the Assessment of Ductile Fracture Margin in Nuclear Power Plant Piping
Ranganath S., Mehta H.
Fracture of Circumferentially Cracked Type 304 Stainless Steel Pipes Under Dynamic Loading
Wilkowski G., Ahmad J., Zahoor A., Marschall C., Broek D., Abou-Sayed I., Kanninen M.
JR-Curve Testing of Large Compact Specimens
McCabe D., Landes J.
On the Unloading Compliance Method of Deriving Single-Specimen R-Curves in Three-Point Bending
Willoughby A., Garwood S.
Evaluation of Several JIc Testing Procedures Recommended in Japan
Ohji K., Otsuka A., Kobayashi H.
Evaluation of Blunting Line and Elastic-Plastic Fracture Toughness
Kobayashi H., Nakamura H., Nakazawa H.
Instability Testing of Compact and Pipe Specimens Utilizing a Test System Made Compliant by Computer Control
Joyce J.
Computer-Controlled Single-Specimen J-Test
Van Der Sluys W., Futato R.
Quantitative Fractographic Definition and Detection of Fracture Initiation in COD/KIc Test Specimens
El-Soudani S., Knott J.
Combined Elastic-Plastic and Acoustic Emission Methods for the Evaluation of Tearing and Cleavage Crack Extension
Khan M., Shoji T., Takahashi H., Nütsuma H.
An Analysis of Elastic-Plastic Fracture Toughness Behavior for JIc Measurement in the Transition Region
Iwadate T., Tanaka Y., Ono S., Watanabe J.
An Evaluation of the JR-Curve Method for Fracture Toughness Characterization
McCabe D., Landes J., Ernst H.
Specimen Geometry and Extended Crack Growth Effects on JI-R Curve Characteristics for HY-130 and ASTM A533B Steels
Davis D., Vassilaros M., Gudas J.
An Elastic-Plastic Fracture Mechanics Study of Crack Initiation in 316 Stainless Steel
Davies P.
Thickness Effects on the Choice of Fracture Criteria
Liu H., Hu W., Kuo A.
Experimental Validation of Resistance Curve Analysis
Milne I.
Elastic-Plastic Fracture Mechanics Analysis of Fatigue Crack Growth
El Haddad M., Mukherjee B.
Elastic-Plastic Crack Propagation Under High Cyclic Stresses
Tanaka K., Hoshide T., Nakata M.
Load History Effects on the JR-Curve
Landes J., McCabe D.
Micromechanisms of Ductile Stable Crack Growth in Nuclear Pressure Vessel Steels
Belcher W., Druce S.
Ductile Fracture with Serrations in AISI 310S Stainless Steel at Liquid Helium Temperature
Tobler R.
J-R Curve Characterization of Irradiated Low-Shelf Nuclear Vessel Steels
Loss F., Menke B., Hiser A., Watson H.
Initiation of Fatigue Cracks Around Inclusions in Rolling Fatigue
Freitas M., Francois D.
Index
Committee: E08
Paper ID: STP803V2-EB
DOI: 10.1520/STP803V2-EB
ISBN-EB: 978-0-8031-4870-3
 ASTM International is a member of CrossRef.
0-8031-0726-9
978-0-8031-0726-7
STP803V2-EB
|
