|
|
|
SEDL / STP / STP803V1-EB
 |
STP803V1
Elastic-Plastic Fracture: Second Symposium, Volume I—Inelastic Crack Analysis
Shih CF, Gudas JP
Pages: 762
Published: 1983
Other books in this series
|
|
Two separate volumes comprise STP803. The papers in these two volumes have been grouped into six topic areas including elastic-plastic crack analysis, fully plastic crack and surface flaw analysis and correlation, engineering applications, test methods and geometry effects, and cyclic plasticity effects and material characterization.
Table of Contents
The Jext-Integral Based on the Concept of Effective Energy Release Rate
Kageyama K., Kikuchi M., Machida K., Miyamoto H.
A Criterion Based on Crack-Tip Energy Dissipation in Plane-Strain Crack Growth Under Large-Scale Yielding
Abé H., Saka M., Shoji T., Takahashi H.
Discontinuous Extension of Fracture in Elastic-Plastic Deformation Field
Wnuk M.
Influence of Compressibility on the Elastic-Plastic Field of a Growing Crack
Gao Y.
Material Resistance and Instability Beyond J-Controlled Crack Growth
Ernst H.
An Elastoplastic Finite-Element Investigation of Crack Initiation Under Mixed-Mode Static and Dynamic Loading
Ahmad J., Barnes C., Kanninen M.
Elastic Field Surrounding a Rapidly Tearing Crack
Kobayashi A., Lee O.
Elastic-Plastic Analysis of a Nozzle Corner Crack by the Finite-Element Method
Brocks W., Erbe H., Noack H., Veith H.
Elastic-Plastic Finite-Element Analysis for Two-Dimensional Crack Problems
Gifford L., Hilton P.
Bounds for Fully Plastic Crack Problems for Infinite Bodies
He M., Hutchinson J.
Penny-Shaped Crack in a Round Bar of Power-Law Hardening Material
He M., Hutchinson J.
Elastic-Plastic and Fully Plastic Analysis of Crack Initiation, Stable Growth, and Instability in Flawed Cylinders
German M., Kumar V., Shih C.
A Superposition Method for Nonlinear Crack Problems
Aizawa T., Yagawa G.
Consistency Checks for Power-Law Calibration Functions
Kumar V., Parks D., Shih C.
Ductile Growth of Part-Through Surface Cracks: Experiment and Analysis
Parks D., Ritchie R., White C.
Elastic-Plastic Steady Crack Growth in Plane Stress
Dean R.
Evaluation of J-Integral for Surface Cracks
Miyoshi T., Shiratori M.
Effects of Thickness on J-Integral in Structures
Aoki S., Kanzawa M., Kishimoto K., Ogure N., Sakata M.
J-Integral Analysis of Surface Cracks in Pipeline Steel Plates
Cheng Y., King R., McHenry H., Read D.
Use of J-Integral Estimation Techniques to Determine Critical Fracture Toughness in Ductile Steels
Green G., Miles L.
Evaluation of Plate Specimens Containing Surface Flaws Using J-Integral Methods
Chung D., Eiholzer C., Reuter W.
Crack-Tip Stress Fields and Crack Growth Under Creep-Fatigue Conditions
Riedel H.
Stable Crack Extension Rates in Ductile Materials: Characterization by a Local Stress-Intensity Factor
Hart E.
A Finite-Element Study of the Asymptotic Near-Tip Fields for Mode I Plane-Strain Cracks Growing Stably in Elastic-Ideally Plastic Solids
Sham T.
Cracks in Materials with Hyperbolic-Sine-Law Creep Behavior
Bassani J.
Stress Concentrations Due to Sliding Grain Boundaries in Creeping Alloys
Argon A., Lau C., McClintock F.
Steady-State Crack Growth in Elastic Power-Law Creeping Materials
Hui C.
Effects of Creep Recovery and Hardening on the Stress and Strain-Rate Fields Near a Crack Tip in Creeping Materials
Kubo S.
Dynamic Growth of an Antiplane Shear Crack in a Rate-Sensitive Elastic-Plastic Material
Douglas A., Freund L.
On the Time and Loading Rate Dependence of Crack-Tip Fields at Room Temperature—A Viscoplastic Analysis of Tensile Small-Scale Yielding
Krempl E., Little M., Shih C.
Boundary-Element Analysis of Stresses in a Creeping Plate with a Crack
Banthia V., Mukherjee S.
Estimates of the C* Parameter for Crack Growth in Creeping Materials
Smith D., Webster G.
Crack Growth in Creeping Solids
McEvily A., Radhakrishnan V.
Parametric Analysis of Creep Crack Growth in Austenitic Stainless Steel
Sadananda K., Shahinian P.
Microstructural and Environmental Effects During Creep Crack Growth in a Superalloy
Floreen S.
Influence of Time-Dependent Plasticity on Elastic-Plastic Fracture Toughness
Ingham T., Morland E.
Crack-Tip Stress and Deformation Fields in a Solid with a Vertex on Its Yield Surface
Needleman A., Tvergaard V.
Committee: E08
Paper ID: STP803V1-EB
DOI: 10.1520/STP803V1-EB
ISBN-EB: 978-0-8031-4869-7
 ASTM International is a member of CrossRef.
0-8031-0727-7
978-0-8031-0727-4
STP803V1-EB
|
